Recreational Vehicle Service Technician Interview Questions
For technicians who service recreational vehicles, including travel trailers. Interviews focus on tracking down faults, reading work orders and checking repairs.
30 questions, ranked by what the job needs most
Print the top 10:Scoring sheetPractice sheet
Question 1: Tell me how you got a recreational vehicle's slide-out working again after it stopped partway.
Interviewer tipListen for an inspection finding that explains both why the slide-out stopped and why the repair worked. Replacing parts before checking what stopped the movement is a red flag.
Candidate tipA slide-out is a section that extends to add living space. Describe what you found on inspection, how it pointed to the fix, and what you saw when you ran the slide-out again.
Question 2: How do you figure out what needs repair when a travel trailer's furnace blows cold air?
Interviewer tipA good answer distinguishes a running blower from a burner that lights and stays on. Taking cold air alone as proof that the furnace needs replacing is a red flag.
Candidate tipWalk through your checks, from the thermostat setting to whether the burner lights and stays on. Explain which finding would point you to the repair.
Question 3: Walk me through a time you used shore power to test an appliance or light fixture in a recreational vehicle.
Interviewer tipListen for a check that the external supply was suitable for the vehicle and a test at the appliance or light's own switch. Assuming the fixture works because power is available misses the point of the test.
Candidate tipShore power is electricity from an outside hookup. Describe what you checked before connecting the vehicle and what you observed when you switched on the appliance or light.
Question 4: Share an example of a time you traced an RV electrical fault to damaged wiring or a bad connection.
Interviewer tipListen for a clear test sequence, safe isolation and a verified wiring repair. Repeatedly replacing a fuse without finding the fault is a red flag.
Candidate tipChoose one wiring fault. Explain the symptom, the diagram or meter checks you used, the connection you repaired and the final test.
Question 5: Share a time you tested a travel trailer's water supply after repairing a leak.
Interviewer tipThe answer should show what they observed at the repaired line or fitting with the water supply on. A dry fitting with the water shut off doesn't show that the leak is fixed.
Candidate tipName the line or fitting you repaired and describe how you checked it once the water supply was back on. End with what the test showed.
Question 6: What would you do if an RV propane line still failed its leak test after you repaired a connection?
Interviewer tipThe propane supply should stay off until the fault is located, repaired and retested safely. Using a flame to find the leak or returning the RV with a known leak is unacceptable.
Candidate tipStart with keeping the propane system out of use. Describe safe leak checks, the repair limits you would recognize and the test needed before restoring service.
Question 7: Give an example of when double-checking a part number made a difference on a recreational vehicle repair.
Interviewer tipListen for the exact marking they checked, why it mattered for fit, and the effect on the repair. Choosing a replacement by appearance alone is a red flag.
Candidate tipName the part you needed and the label or parts listing you checked to verify the number. End with what that check changed for the repair.
Question 8: How do you sort out a travel trailer repair when the customer's description doesn't match the work order?
Interviewer tipA strong answer explains how they'd clear up a specific mismatch before deciding what needs repair. Ignoring the customer's report because it differs from the work order is a red flag.
Candidate tipUse a specific mismatch between the customer's account and the work order. Explain what you'd clarify with the customer or check on the trailer to pin down the repair.
Question 9: Describe a time a close look at a travel trailer's roof or window seals helped you find where water was getting in.
Interviewer tipListen for the clue that linked the suspect seal to the water inside. Assuming the leak starts directly above a stain without checking is a red flag.
Candidate tipStart with the sign of water you saw inside. Describe what you noticed about the seal and the clue that linked it to the leak.
Question 10: How did you decide on a fix the last time a travel trailer's tires were wearing unevenly?
Interviewer tipListen for the findings that helped them rule out one option and choose another. Replacing tires without looking into the uneven wear leaves the cause unchecked.
Candidate tipDescribe the wear pattern and the checks you used to weigh possible fixes, such as checking tire pressure or axle alignment. Finish with the fix you chose and what happened.
Question 11: What would you do if a travel trailer's brakes still dragged after a brake repair?
Interviewer tipExpect the trailer to stay out of service while they check the brake assembly and adjustment using service instructions. Releasing it with dragging brakes is a wrong first move.
Candidate tipExplain how you would keep the trailer from being used, narrow down the cause and verify the brake repair before release.
Question 12: Walk me through a time you repaired an RV water pipe leak in a tight space.
Interviewer tipThe example should cover access, the failed pipe or joint and a leak check after repair. Sealing over damage without assessing the pipe is a concern.
Candidate tipDescribe where the pipe leaked and what limited access. Focus on the repair you made and how you checked the joint under normal water pressure.
Question 13: How do you test an RV's sinks and toilet after connecting the plumbing inlet to a water supply?
Interviewer tipA competent answer checks the supply against the RV's limits, operates each fixture and checks flow, drainage and leaks. Ignoring a leaking connection is a red flag.
Candidate tipGo in order from the inlet connection to the sinks and toilet. Name the supply checks and signs that each fixture is working properly.
Question 14: Walk me through a mechanical repair you completed on an RV appliance or moving part.
Interviewer tipA strong example explains the failed mechanism, the candidate's repair and a working test. Replacing parts without identifying the fault is a warning sign.
Candidate tipChoose one RV component. Describe the mechanical fault, the work you did and how you checked that the part moved or operated correctly.
Question 15: Walk me through a time you chose tools to remove old sealant from an RV roof.
Interviewer tipListen for why the tools suited the sealant and roof surface, plus the result and a lesson. Choosing a tool that cuts or gouges the roof membrane is a red flag.
Candidate tipUse a real roof sealant repair and name the tools you selected. Explain how the roof material and access shaped your choices, then describe the result and what you would change next time.
Question 16: Describe a time an RV parts diagram helped you correct a repair estimate before work began.
Interviewer tipLook for a specific part or procedure they identified and a revised estimate based on it. Guessing part compatibility without checking the diagram is a concern.
Candidate tipChoose one estimate. Explain what the parts diagram clarified, how it affected parts or labor and how you documented the change.
Question 17: Tell me about a time you followed through on an RV repair commitment despite a setback.
Interviewer tipReliable follow-through includes tracking unfinished work and communicating delays. Hiding an incomplete repair to meet a promised pickup time is a red flag.
Candidate tipChoose a repair with a parts or scheduling setback. Explain what you took responsibility for, how you kept others informed and how the work ended.
Question 18: Share an example of a time you used new service information to repair an RV system.
Interviewer tipListen for the source of the service information and how it changed their work on the RV. Relying on an unverified shortcut is a concern.
Candidate tipName the RV system, the information you needed to learn and how you used it. End with the repair result and what you would use again.
Question 19: Describe a time you used past RV work orders and service manuals to investigate a recurring fault.
Interviewer tipThe example should show which repair history and manual details helped narrow the fault, with a result and lesson. Treating a past repair entry as proof of the current cause is a red flag.
Candidate tipPick one recurring RV fault and explain what you gathered from the work orders and manuals. Show how you sorted useful details from unrelated history, then finish with the result and what you learned.
Question 20: Tell me about the last time you performed routine maintenance on equipment. How did you determine when and what type of work was needed?
Example answerThe interviewer wants to see that you keep equipment in good shape on a schedule and can tell when extra care is needed.
Use Situation, Task, Action, Result. Name the equipment and explain how you decided when and what to do, such as the manufacturer's schedule, hours of use, checklists, or warning signs like noise, heat, or leaks. Then describe the work and how it helped.
Sample answer: "I was responsible for weekly maintenance on two forklifts. I followed the schedule in the manual and kept a log of hours and fluid levels. During one weekly check, I noticed the hydraulic fluid was lower than the week before, so I added an inspection of the hoses. I found one starting to crack, tagged the forklift out of service, and replaced the hose before it failed. Keeping the log is what made the change easy to spot."
Pitfalls: Don't describe maintenance as only fixing things after they break. Avoid skipping safety steps such as lockout. Don't forget to explain how you decided what work was needed, since the question asks.
Question 21: Tell me how you organize, plan, and prioritize your work.
Example answerThe interviewer wants to understand your system for managing work, and whether it holds up when priorities change.
Describe the method you actually use, step by step, then back it with a short example. Cover how you capture tasks, how you decide what comes first (deadlines, impact, who is waiting on you), and how often you review the plan. Mention what you do when something urgent comes in.
Sample answer: "I keep one task list and review it every morning. I sort tasks by deadline and by who depends on them, and I block time on my calendar for the two or three most important ones. At the end of the week I look at what slipped and why. Last month a rush request came in mid-week, so I checked with my manager about which existing task could move, shifted it, and told the person affected right away."
Pitfalls: Don't give a vague answer like 'I'm very organized.' Avoid naming tools without explaining how you use them. Don't describe a system that has no way to handle changes.
Candidate tipBe sure to mention that you make specific goals.
Question 22: Share an experience in which you conducted a test of a product, service, or process and successfully improved the quality or performance.
Example answerThe interviewer wants evidence that you test things carefully and use what you find to make them better.
Use Situation, Task, Action, Result. Explain what you tested and why, how you set up the test, what the results showed, and what you changed. End with how you measured the improvement.
Sample answer: "Customers kept saying our online order form was confusing, so I was asked to look into it. I had five coworkers who had never used the form place a test order while I watched and took notes. Four of them got stuck on the same shipping step. I suggested moving that step and rewording two labels, then ran the same test again. All five finished without help, and complaints about the form dropped over the next month."
Pitfalls: Don't describe a change made on a hunch with no test. Avoid skipping how you checked the result. Don't use jargon without explaining it.
Question 23: Walk me through how you would explain proper operation of vehicle systems to customers.
Question 24: Please share an experience in which you successfully taught a difficult principle or concept. How were you able to be successful?
Example answerThe interviewer wants to know whether you can explain hard ideas so others actually understand and use them.
Use Situation, Task, Action, Result. Describe who you were teaching and why the concept was hard for them. Focus on the second part of the question: the methods you used, such as breaking it into steps, using a real example, or checking for understanding. End with how you knew they had learned it.
Sample answer: "A new coworker kept struggling with how our budget codes worked, and errors were slowing approvals. Instead of explaining the rules again, I pulled three real expense reports and walked through each one with them, asking them to choose the code before I confirmed it. Then I gave them a one-page cheat sheet. Within two weeks their reports were coming through without corrections."
Pitfalls: Don't blame the learner. Avoid saying you just explained it until they got it. Don't skip how you checked that they understood.
Question 25: Tell me about a time removing an RV exterior panel revealed damage to a frame member.
Interviewer tipA strong example distinguishes panel damage from structural damage and explains the candidate's repair work. Covering damaged framing with a new panel is a red flag.
Candidate tipSet up the visible damage, then describe what panel removal revealed. Explain your part in repairing or replacing the frame member and the finished result.
Question 26: Give an example of how you reset loose cabinet hardware in an RV so it held securely.
Interviewer tipListen for attention to the mounting surface, hardware position and secure operation. Tightening screws in stripped holes without restoring a sound hold is a warning sign.
Candidate tipUse a cabinet latch or hinge repair. Explain what had loosened, how you reset its mounting and how you checked that the hardware held.
Question 27: Talk about a time you fitted an RV door or drawer that was rubbing against its opening.
Interviewer tipThe example should show how they located the rubbing and checked the fit after adjustment. Trimming an edge without finding the contact point is a concern.
Candidate tipDescribe the rubbing, the fit checks you made and the adjustment or trimming you performed. End with how the door or drawer operated.
Question 28: Tell me about the last time you refinished wood surfaces on cabinets, doors, moldings, or floors, using power sanders, putty, spray equipment, brushes, paints, or varnishes.
Question 29: Describe how you worked with an RV customer who was upset about a repair.
Interviewer tipA strong example shows listening, a clear explanation of the repair and respectful follow-up. Blaming or dismissing the customer is a red flag.
Candidate tipUse one real customer interaction. Explain the concern, what you did to keep the discussion useful and how the interaction ended.
Question 30: Describe your experience moving recreational vehicles safely around a service area.
Interviewer tipListen for clearance checks, control of the path and help when visibility is limited. Moving an RV without checking the area is a red flag.
Candidate tipDescribe the RVs you have moved and the checks you made before and during a move. Be clear about tasks you have not yet performed.
New to interviews? Start with the common questions every interview asks →