RVDA Master Certified RV Technician (Recreational Vehicle Dealer Association Master Certified Recreational Vehicle Technician) Interview Questions
30 questions
Question 1: Describe an experience when you inspected recreational vehicles to diagnose problems and performed necessary adjustment, repair, or overhaul.
Suggested answerThe interviewer wants to understand how you inspect an RV before deciding what needs repair.
Build your answer around one real vehicle. Describe the reported problem and your responsibility, then spend most of the answer on the inspection and tests you performed. Connect each important finding to your repair decision. Finish with the result and how you confirmed it.
For example: "A customer reported water under a trailer's kitchen cabinet. I needed to find the source before replacing anything. I dried the area, checked the visible plumbing and ran the sink while watching the connections. A drain joint leaked only when the sink emptied. I repaired that joint, repeated the drain test and checked that the cabinet stayed dry. I recorded the source and repair on the work order."
Avoid listing repairs without explaining the diagnosis, guessing from the first symptom or taking credit for inspections someone else performed. Use a case that reflects your own experience.
Question 2: What factors do you consider when diagnosing and repairing furnace or air conditioning systems?
Suggested answerThe interviewer wants to know how you narrow down an RV heating or cooling fault without guessing at replacement parts.
Organize your answer around the reported symptom, the type of system and the checks that separate possible causes. Explain how service instructions guide your tests. Include safe working limits and how you verify operation after a repair.
For example: "For an RV air conditioner that runs but does not cool well, I first clarify when the problem occurs. I check the controls, power supply and airflow against the service information. I inspect the filter and accessible air paths before moving to component tests. If I find a restricted air path, I correct it and retest cooling under the operating conditions described by the customer. I record the findings and any work that needs a specialist."
Avoid treating a furnace and air conditioner as identical, replacing parts before testing or working beyond your training. A focused explanation of the checks is stronger than a long list of possible faults.
Question 3: How do you safely connect an RV to outside electrical power to test its appliances or lights?
Suggested answerThe interviewer wants to hear a safe, orderly method for supplying outside power and checking an RV's appliances or lights.
Explain the checks before connection, the connection sequence you follow from the RV's service instructions and the function test. Name the conditions that would make you stop. Keep your answer within the electrical work you are trained and authorized to perform.
For example: "I first check the RV's supply requirements and the condition of its cord, plug and inlet. I verify that the outside source is suitable before making the connection, following the service instructions for switching and connecting. Once power is safely supplied, I test the appliance or lighting circuit named on the work order. If a connection is damaged or the supply is unsuitable, I stop and resolve that issue before testing."
Avoid treating every outlet as suitable, connecting visibly damaged equipment or bypassing a protective device to make a test work. Describe your actual checks rather than claiming that caution alone keeps the job safe.
What interviewers listen forThe answer should cover the RV's supply requirements, cord and connection checks, and a controlled function test. Connecting damaged equipment is a red flag.
Candidate tipWalk through the checks before connecting power, then the appliance or light test. Explain when an unsafe supply or connection would stop the test.
Question 4: Share an example of a time you traced an RV electrical fault to damaged wiring or a bad connection.
What interviewers listen forListen for a clear test sequence, safe isolation and a verified wiring repair. Repeatedly replacing a fuse without finding the fault is a red flag.
Candidate tipChoose one wiring fault. Explain the symptom, the diagram or meter checks you used, the connection you repaired and the final test.
Question 5: Share an example when you effectively examined or tested operation of parts or systems to ensure completeness of repairs.
Suggested answerThe interviewer wants to know whether you verify a repair rather than assume that replacing a part solved the problem.
Choose a real RV repair and briefly explain the original fault and your testing responsibility. Describe the checks you personally completed after the repair, including the conditions needed to reproduce the complaint. End with the result and the record you left for the shop.
For example: "An RV's interior lights flickered when several fixtures were on. After repairing a loose 12-volt ground connection, I turned on the same fixtures that had triggered the complaint. I checked voltage drop across the repaired connection under that load and watched the lights through repeated on-and-off cycles. The lights stayed steady, and the readings were within the service specification. I recorded the load test and readings on the work order before returning the RV."
Avoid saying only that the system worked, testing under conditions that could miss the original fault or signing off on work you did not check. A failed retest can be a useful example if you explain the further work and final verification.
Question 6: What would you do if an RV propane line still failed its leak test after you repaired a connection?
What interviewers listen forThe propane supply should stay off until the fault is located, repaired and retested safely. Using a flame to find the leak or returning the RV with a known leak is unacceptable.
Candidate tipStart with keeping the propane system out of use. Describe safe leak checks, the repair limits you would recognize and the test needed before restoring service.
Question 7: Give an example of a small detail you caught during RV service that changed the repair.
Suggested answerThe interviewer wants evidence that you notice small details that affect the quality of an RV repair.
Use one real example. Briefly describe the service job and what you were responsible for checking. Explain the detail you noticed, your action and the effect on the repair. Keep the focus on your observations rather than a general claim that you are thorough.
For example: "While servicing an RV water connection, I noticed a small crack beside the fitting. The joint looked dry after the first check, but the crack made me look closer. I inspected the pipe and found that tightening the fitting alone would not address the damage. I replaced the damaged section, restored the water supply and checked the area again. The connection stayed dry, and I recorded why the pipe needed replacement."
Avoid exaggerating the consequence of a minor finding, describing checks you did not perform or stopping the story before the repair result. Explain what made the detail worth investigating.
What interviewers listen forA good example names the detail, their own check and the repair consequence. A general claim about being careful gives little evidence.
Candidate tipChoose a detail such as a loose connection or damaged seal. Explain how you noticed it, what you did and how it affected the finished repair.
Question 8: Tell me how you worked out the scope of an RV repair when the customer's description was unclear.
Suggested answerThe interviewer wants to see how you turn an unclear customer complaint into a defined RV repair job.
Describe one real situation and your role in understanding the complaint. Explain the questions you asked, what you checked on the vehicle and how you recorded the repair needs. Finish with the scope you established, rather than moving into a long account of the repair itself.
For example: "A customer said the lights in a trailer sometimes stopped working. I asked which lights were affected and when they noticed it. Their answers pointed to a smaller group of fixtures than the original work order suggested. I checked those lights and their connections and confirmed a fault in the shared circuit. I updated the work order with the affected fixtures and the checks supporting the repair."
Avoid dismissing the customer's wording, promising a repair before investigating or treating an unconfirmed complaint as a diagnosis. Make clear which details came from the customer and which you verified.
What interviewers listen forThe example should connect the customer's observations with the work order and vehicle checks. Guessing the repair from a vague complaint is a red flag.
Candidate tipSet out the unclear complaint, the questions and checks you used, and the repair needs you documented before work began.
Question 9: Share an example of an RV inspection that uncovered damage beyond the reported problem.
Suggested answerThe interviewer wants to know whether your RV inspections can uncover related damage without turning into unsupported repair recommendations.
Pick a real case with a reported problem and an additional finding. Describe the inspection you performed, the evidence that confirmed the extra damage and what you recorded. Finish with how the finding affected the repair plan or next step.
For example: "A customer brought in a trailer because a cabinet door would not close properly. While checking the hinges and cabinet opening, I noticed movement at a mounting point. I inspected the nearby material and found damage that a hinge adjustment would not fix. I documented the loose mounting and the damaged area on the work order so the repair could address the support as well as the door fit."
Avoid presenting a suspicion as confirmed damage, recommending unrelated work without evidence or claiming credit for another technician's inspection. Show how you distinguished the original complaint from the additional finding.
What interviewers listen forListen for a specific inspection finding and evidence of the damage. Recommending extra repairs without confirming a problem is a warning sign.
Candidate tipDescribe the reported problem, the areas you inspected and the damage you found. Explain how you confirmed and recorded the finding.
Question 10: Talk about a time RV test results led you to choose between repairing a part and replacing it.
Suggested answerThe interviewer wants to understand how you use RV test results to make a practical repair or replacement decision.
Choose one real decision with more than one reasonable option. Set out the fault and your responsibility, then explain the evidence you considered. Describe why your chosen option addressed the condition you found. Finish with the repair result and any lesson you took from it.
For example: "An RV cabinet latch would not hold. I checked the latch action and the mounting before recommending a replacement. The latch itself worked, but its screws no longer held securely in the mounting surface. I restored the mounting and reset the hardware instead of replacing a working latch. I opened and closed the door several times and checked that it stayed latched. I recorded the actual cause on the work order."
Avoid choosing only by price, replacing a part without checking its condition or defending the first idea after tests point elsewhere. Keep the evidence and your own decision clear.
What interviewers listen forLook for a decision based on test results and the part's condition. Choosing a replacement without considering the evidence is a concern.
Candidate tipUse one repair decision. Explain the test evidence, the options you considered and why your choice addressed the fault.
Question 11: What would you do if a travel trailer's brakes still dragged after a brake repair?
What interviewers listen forExpect the trailer to stay out of service while they check the brake assembly and adjustment using service instructions. Releasing it with dragging brakes is a wrong first move.
Candidate tipExplain how you would keep the trailer from being used, narrow down the cause and verify the brake repair before release.
Question 12: Walk me through a time you repaired an RV water pipe leak in a tight space.
What interviewers listen forThe example should cover access, the failed pipe or joint and a leak check after repair. Sealing over damage without assessing the pipe is a concern.
Candidate tipDescribe where the pipe leaked and what limited access. Focus on the repair you made and how you checked the joint under normal water pressure.
Question 13: How do you test an RV's sinks and toilet after connecting the plumbing inlet to a water supply?
What interviewers listen forA competent answer checks the supply against the RV's limits, operates each fixture and checks flow, drainage and leaks. Ignoring a leaking connection is a red flag.
Candidate tipGo in order from the inlet connection to the sinks and toilet. Name the supply checks and signs that each fixture is working properly.
Question 14: Walk me through a mechanical repair you completed on an RV appliance or moving part.
What interviewers listen forA strong example explains the failed mechanism, the candidate's repair and a working test. Replacing parts without identifying the fault is a warning sign.
Candidate tipChoose one RV component. Describe the mechanical fault, the work you did and how you checked that the part moved or operated correctly.
Question 15: Walk me through a time you chose tools to remove old sealant from an RV roof.
What interviewers listen forListen for why the tools suited the sealant and roof surface, plus the result and a lesson. Choosing a tool that cuts or gouges the roof membrane is a red flag.
Candidate tipUse a real roof sealant repair and name the tools you selected. Explain how the roof material and access shaped your choices, then describe the result and what you would change next time.
Question 16: Describe a time an RV parts diagram helped you correct a repair estimate before work began.
What interviewers listen forLook for a specific part or procedure they identified and a revised estimate based on it. Guessing part compatibility without checking the diagram is a concern.
Candidate tipChoose one estimate. Explain what the parts diagram clarified, how it affected parts or labor and how you documented the change.
Question 17: Tell me about a time you followed through on an RV repair commitment despite a setback.
What interviewers listen forReliable follow-through includes tracking unfinished work and communicating delays. Hiding an incomplete repair to meet a promised pickup time is a red flag.
Candidate tipChoose a repair with a parts or scheduling setback. Explain what you took responsibility for, how you kept others informed and how the work ended.
Question 18: Share an example of a time you used new service information to repair an RV system.
What interviewers listen forListen for the source of the service information and how it changed their work on the RV. Relying on an unverified shortcut is a concern.
Candidate tipName the RV system, the information you needed to learn and how you used it. End with the repair result and what you would use again.
Question 19: Describe a time you used past RV work orders and service manuals to investigate a recurring fault.
What interviewers listen forThe example should show which repair history and manual details helped narrow the fault, with a result and lesson. Treating a past repair entry as proof of the current cause is a red flag.
Candidate tipPick one recurring RV fault and explain what you gathered from the work orders and manuals. Show how you sorted useful details from unrelated history, then finish with the result and what you learned.
Question 20: Tell me about the last time you performed routine maintenance on equipment. How did you determine when and what type of work was needed?
Suggested answerThe interviewer wants to see that you keep equipment in good shape on a schedule and can tell when extra care is needed.
Use Situation, Task, Action, Result. Name the equipment and explain how you decided when and what to do, such as the manufacturer's schedule, hours of use, checklists, or warning signs like noise, heat, or leaks. Then describe the work and how it helped.
Sample answer: "I was responsible for weekly maintenance on two forklifts. I followed the schedule in the manual and kept a log of hours and fluid levels. During one weekly check, I noticed the hydraulic fluid was lower than the week before, so I added an inspection of the hoses. I found one starting to crack, tagged the forklift out of service, and replaced the hose before it failed. Keeping the log is what made the change easy to spot."
Pitfalls: Don't describe maintenance as only fixing things after they break. Avoid skipping safety steps such as lockout. Don't forget to explain how you decided what work was needed, since the question asks.
Question 21: Tell me how you organize, plan, and prioritize your work.
Suggested answerThe interviewer wants to understand your system for managing work, and whether it holds up when priorities change.
Describe the method you actually use, step by step, then back it with a short example. Cover how you capture tasks, how you decide what comes first (deadlines, impact, who is waiting on you), and how often you review the plan. Mention what you do when something urgent comes in.
Sample answer: "I keep one task list and review it every morning. I sort tasks by deadline and by who depends on them, and I block time on my calendar for the two or three most important ones. At the end of the week I look at what slipped and why. Last month a rush request came in mid-week, so I checked with my manager about which existing task could move, shifted it, and told the person affected right away."
Pitfalls: Don't give a vague answer like 'I'm very organized.' Avoid naming tools without explaining how you use them. Don't describe a system that has no way to handle changes.
Candidate tipBe sure to mention that you make specific goals.
Question 22: Share an experience in which you conducted a test of a product, service, or process and successfully improved the quality or performance.
Suggested answerThe interviewer wants evidence that you test things carefully and use what you find to make them better.
Use Situation, Task, Action, Result. Explain what you tested and why, how you set up the test, what the results showed, and what you changed. End with how you measured the improvement.
Sample answer: "Customers kept saying our online order form was confusing, so I was asked to look into it. I had five coworkers who had never used the form place a test order while I watched and took notes. Four of them got stuck on the same shipping step. I suggested moving that step and rewording two labels, then ran the same test again. All five finished without help, and complaints about the form dropped over the next month."
Pitfalls: Don't describe a change made on a hunch with no test. Avoid skipping how you checked the result. Don't use jargon without explaining it.
Question 23: Walk me through how you would explain proper operation of vehicle systems to customers.
Question 24: Please share an experience in which you successfully taught a difficult principle or concept. How were you able to be successful?
Suggested answerThe interviewer wants to know whether you can explain hard ideas so others actually understand and use them.
Use Situation, Task, Action, Result. Describe who you were teaching and why the concept was hard for them. Focus on the second part of the question: the methods you used, such as breaking it into steps, using a real example, or checking for understanding. End with how you knew they had learned it.
Sample answer: "A new coworker kept struggling with how our budget codes worked, and errors were slowing approvals. Instead of explaining the rules again, I pulled three real expense reports and walked through each one with them, asking them to choose the code before I confirmed it. Then I gave them a one-page cheat sheet. Within two weeks their reports were coming through without corrections."
Pitfalls: Don't blame the learner. Avoid saying you just explained it until they got it. Don't skip how you checked that they understood.
Question 25: Tell me about a time removing an RV exterior panel revealed damage to a frame member.
What interviewers listen forA strong example distinguishes panel damage from structural damage and explains the candidate's repair work. Covering damaged framing with a new panel is a red flag.
Candidate tipSet up the visible damage, then describe what panel removal revealed. Explain your part in repairing or replacing the frame member and the finished result.
Question 26: Give an example of how you reset loose cabinet hardware in an RV so it held securely.
What interviewers listen forListen for attention to the mounting surface, hardware position and secure operation. Tightening screws in stripped holes without restoring a sound hold is a warning sign.
Candidate tipUse a cabinet latch or hinge repair. Explain what had loosened, how you reset its mounting and how you checked that the hardware held.
Question 27: Talk about a time you fitted an RV door or drawer that was rubbing against its opening.
What interviewers listen forThe example should show how they located the rubbing and checked the fit after adjustment. Trimming an edge without finding the contact point is a concern.
Candidate tipDescribe the rubbing, the fit checks you made and the adjustment or trimming you performed. End with how the door or drawer operated.
Question 28: Tell me about the last time you refinished wood surfaces on cabinets, doors, moldings, or floors, using power sanders, putty, spray equipment, brushes, paints, or varnishes.
Question 29: Describe how you worked with an RV customer who was upset about a repair.
What interviewers listen forA strong example shows listening, a clear explanation of the repair and respectful follow-up. Blaming or dismissing the customer is a red flag.
Candidate tipUse one real customer interaction. Explain the concern, what you did to keep the discussion useful and how the interaction ended.
Question 30: Describe your experience moving recreational vehicles safely around a service area.
What interviewers listen forListen for clearance checks, control of the path and help when visibility is limited. Moving an RV without checking the area is a red flag.
Candidate tipDescribe the RVs you have moved and the checks you made before and during a move. Be clear about tasks you have not yet performed.