Medical Laboratory Technologist (Medical Lab Tech) Interview Questions
30 questions
Question 1: Provide an experience in which you used microscopic techniques to determine the characteristics of blood samples.
Suggested answerThe interviewer wants to see that you can read a blood smear reliably and know when a finding needs a second look. Use Situation, Task, Action, Result: the sample, what the analyzer or smear showed, what you looked for under the microscope, and what happened next.
Sample answer: Our hematology analyzer flagged a patient's sample for abnormal white cells, so I made and stained a smear for a manual differential. Under the microscope I saw immature-looking cells that the analyzer had counted as normal. I checked the patient's earlier results, which had been normal, and asked a senior technologist to review the slide before I released anything. They agreed it needed a pathologist review, so we sent it on and called the provider under our policy. Afterward I added that flag and what to look for to my own bench checklist.
Pitfalls: describing only the analyzer and not your own slide review, skipping when you escalate to a senior technologist or pathologist, and overstating what you can diagnose.
Question 2: Describe your experience conducting chemical analysis of body fluids.
Suggested answerThe interviewer wants to know which body fluid chemistry tests you have run, on what kinds of instruments, and how carefully you work. Build the answer around the specimen types you have handled, such as serum, plasma, urine or spinal fluid, the tests and analyzer types you used, and the checks you do before releasing results. Mention specimen handling, because chemistry results depend on it.
Sample answer: In my clinical rotation and my current job I ran routine and STAT chemistry on serum, plasma and urine, including electrolytes, glucose, kidney and liver panels. I also handled spinal fluid glucose and protein, which I treat as irreplaceable, so I check the volume and label before anything else. Each shift I review QC before running patients, watch for hemolysis or lipemia flags, and look at delta checks before I release a result. When something looks off, I rerun it or ask for a new specimen rather than guess.
Pitfalls: listing tests without saying what you actually did, skipping how you protect accuracy, and claiming instruments or test menus you haven't used.
Question 3: Share an effective method you have used to ensure the accuracy of laboratory results.
Suggested answerThe interviewer wants to know what you actually do, every shift, to make sure a result is right before it reaches a patient's chart. Pick one or two methods and show them in use: running and reviewing quality control, comparing results with earlier ones, checking specimen quality, and confirming results outside expected or critical ranges.
Sample answer: My main habit is that I never release a result I haven't looked at in context. Before running patients I review QC against our rules. When a result comes off the analyzer, I compare it with the patient's previous values. Once a potassium came back high on a patient whose earlier results were normal. The specimen had slight hemolysis I'd missed at first glance, so I held the result, noted the reason, and asked for a recollection. The new sample was normal. Since then I check specimen quality before loading, not after.
Pitfalls: naming QC without saying how you use it, relying on the analyzer's flags alone, and describing accuracy as someone else's job.
Question 4: Describe a time you caught a transcription error while entering a laboratory result into the computer.
What interviewers listen forThe example should show how they checked the entry against the original result and corrected the record. Quietly overwriting a released result without a correction trail is a red flag.
Candidate tipChoose one real entry error. Explain how you found it, how you confirmed the correct patient and result, and how you corrected the record. End with what changed in your data entry habits.
Question 5: Share an experience in which you analyzed sampels of biological material for chemical content or reaction.
Question 6: Share an example of how you used specimen rejection records to improve a lab's quality assurance program.
What interviewers listen forListen for their role in finding a pattern, changing the process and checking later rejection records. Lowering rejection standards to make the numbers look better is a red flag.
Candidate tipSet up the rejection pattern you found, such as repeated underfilled tubes. Focus on your part in the improvement and what later records showed. Include one lesson from the effort.
Question 7: Walk me through a time you had to correct poor staining while preparing a specimen slide for microscopic review.
What interviewers listen forA strong case links the staining problem to checks of the slide preparation, stain or timing and shows the corrected slide was usable. Guessing at findings on an unreadable slide is a red flag.
Candidate tipName the specimen and stain, describe what looked wrong, and focus on the checks and corrections you made. Finish with how you judged the slide's quality and what you learned.
Question 8: How do you clean reusable laboratory equipment between specimens to prevent carryover?
What interviewers listen forFor an analyzer probe, listen for the specified wash cycle and a carryover check; for glassware, the specified cleaning and residue check. Declaring either ready solely because it looks clean is a red flag.
Candidate tipUse an analyzer probe or reusable glassware as your example. Walk through the cleaning method in the equipment instructions and the carryover or residue check you use before testing more specimens.
Question 9: Provide an effective method you have used to maintain equipment used in quantitative or qualitative analysis.
Question 10: Share an effective method you have used to provide technical information about test results to physicians, family members, or researchers.
Question 11: Describe an experience in which you cultivated and/or assisted in the identification of microbial organisms. What tests have you performed on these organisms?
Question 12: Provide a time when you used aseptic technique and knowledge of medium components and cell requirements to select and prepare specimens and media for cell cultures.
Question 13: Share an experience in which you successfully supervised and trained assistants or other workers. What methods made you successful?
Question 14: How would you evaluate a change to a specimen preparation step before using it for patient testing?
What interviewers listen forExpect a comparison with the current procedure, clear acceptance criteria and review before use. Treating a single matching result as enough evidence is a red flag.
Candidate tipChoose a specimen preparation step you know. Outline a comparison with the current procedure, the samples and checks you would use, and the evidence needed before the lab accepts the change.
Question 15: Share an experience in which you used your knowledge of cell cycle differences and culture conditions to determine the optimum time to harvest cell cultures.
Question 16: Tell me about a time a quality control run failed and you had to work out the cause before releasing patient results.
Suggested answerThe interviewer wants to see a calm, step-by-step approach and good judgment about patient results already run. Use Situation, Task, Action, Result. Start with which control failed and how, then the checks you made in order, the cause, and what you did about results since the last acceptable QC.
Sample answer: At the start of a shift, the high control for one chemistry test came in outside its limits while the low control was fine. I held patient testing for that assay instead of rerunning the control until it passed. I checked the reagent and found a new pack had been loaded overnight without being calibrated. I recalibrated, reran both controls, and both were in range. Then I reviewed the patients run since the pack change, reran several to confirm them, and documented everything in the QC log for my supervisor.
Pitfalls: rerunning controls without looking for a cause, forgetting the patient results already reported, and skipping the documentation.
What interviewers listen forListen for a methodical check of reagents, calibration, controls and the instrument, holding results until fixed, and documenting it; rerunning the control until it passes is a red flag.
Candidate tipDescribe the failure, what you checked first and why, what the cause was, and what you did about patient results run since the last good QC.
Question 17: Tell me about a time you noticed a problem with a specimen, reagent or instrument before testing that would have affected the result.
Suggested answerThe interviewer wants to know whether you look before you load, and whether you follow your lab's rules once you find a problem. Use Situation, Task, Action, Result: what you noticed, how you noticed it, what you did, and what it prevented.
Sample answer: During a busy morning I picked up a coagulation tube that looked underfilled. Because the ratio of blood to anticoagulant matters for those tests, I checked it against the fill line, and it was well short. Running it would likely have given a falsely long clotting time. I rejected it under our specimen policy, logged the reason in the system, and called the unit to request a new draw, explaining which tube and how full it needed to be. The redraw came in within the hour and the result was normal.
Pitfalls: describing a catch that happened only after you reported the result, skipping how you followed policy, and making it sound like you solved the problem by working around the rules.
What interviewers listen forListen for what they noticed, such as hemolysis, a clot, a mislabeled tube or an expired reagent, and that they followed procedure; running it anyway with a comment is a red flag.
Candidate tipPick a specific catch. Say how you spotted it, what you did under your lab's rules, and how it protected the patient's result.
Question 18: Walk me through how you handled a patient result that didn't fit the patient's history or other results.
Suggested answerThe interviewer wants to learn how you notice questionable laboratory results and check them before release.
Build your answer using Situation, Task, Action, Result. Briefly identify the test and what made the result stand out. Explain your responsibility, then focus on your own checks of the specimen, instrument or earlier results. Include any communication with a nurse, provider or supervisor. Close with the outcome and what you learned. Leave out identifying patient details.
For example: "A potassium result was much higher than the patient's earlier results. I checked the specimen and saw a hemolysis flag. I reviewed the instrument flags and followed our lab's procedure for that specimen. I held the result and contacted the nurse about recollection. The new specimen produced a result consistent with earlier values. I learned to check specimen quality before assuming a patient's condition had changed."
Avoid assuming an unexpected result must be wrong, changing a result just to match earlier values, or describing only what the team did without explaining your part.
What interviewers listen forA strong example explains their checks of the specimen, instrument and earlier results, plus the outcome and lesson. Releasing a questionable result without checking it is a red flag.
Candidate tipChoose a real result that raised concern. Explain what you noticed, the checks you made and any help you sought before release. End with the outcome and what you learned.
Question 19: How do you prioritize your work on a shift when STAT orders, routine samples and scheduled quality control all need attention at once?
What interviewers listen forListen for a clear rule for STAT and critical work, a plan for routine batches, and how they keep QC on schedule; letting QC slide to clear a backlog is a red flag.
Candidate tipWalk through a real busy shift: what you ran first and why, how you kept routine samples moving, and how you told others when turnaround would slip.
Question 20: Tell me about a time you had to tell a nurse or provider that a specimen was rejected and had to be collected again.
Suggested answerThe interviewer wants to see that you can deliver unwelcome news clearly and politely while holding the lab's standards. Use Situation, Task, Action, Result: why the specimen was rejected, how you explained it, how the other person reacted, and how it was resolved.
Sample answer: A blood bank sample arrived with a label that didn't match the requisition, so under our policy it couldn't be used. The patient was waiting for a transfusion, and I knew the nurse would be frustrated. I called right away, said exactly what was wrong, and explained that a mismatch is the kind of error that can lead to the wrong blood being given. I told the nurse what a correct label needed and said I'd process the new sample as soon as it arrived. The nurse wasn't happy but understood, and the new sample was tested quickly.
Pitfalls: being vague about the reason, sounding like you are blaming the nurse, and agreeing to bend the rule to keep the peace.
What interviewers listen forA strong answer gives the reason plainly, says what is needed for the recollection, and stays calm under pushback; bending the rejection criteria to avoid conflict is a red flag.
Candidate tipPick a real case. Say why the specimen couldn't be used, how you explained it, and what you did to make the redraw easy, such as naming the right tube or volume.
Question 21: How do you keep your daily bench work in line with CLIA rules and your lab's accreditation standards?
What interviewers listen forListen for concrete habits: following current procedures, documenting QC and maintenance, keeping competency records, and speaking up about gaps; treating compliance as inspection-week work is a red flag.
Candidate tipGive examples from your routine, such as logging temperatures, signing off maintenance, or using only approved procedures, and mention any inspection you helped prepare for.
Question 22: Share an experience in which your attention to detail and thoroughness had an impact on your last company.
Suggested answerThe interviewer wants proof that you catch errors others miss and that this protects the organization.
Use Situation, Task, Action, Result. Describe what you were checking, what you noticed, and how you found it, such as comparing against a source or double-checking totals. Then explain what would have happened if the error had gone through, and what you did to prevent it next time.
Sample answer: "While preparing an order for a large customer, I compared the quantities against the signed quote, as I always do, and saw that one item had been entered as 1,000 units instead of 100. I flagged it to my supervisor, we corrected it before it shipped, and we avoided a costly return. Afterward I suggested adding a quote-check step to the order form, and the team adopted it."
Pitfalls: Don't just say you're detail-oriented without an example. Avoid exaggerating the dollar impact. Don't describe perfectionism that caused missed deadlines.
Question 23: Provide an example when your ethics were tested.
Suggested answerThe interviewer wants to know whether you do the right thing when it is inconvenient, and how you handle pressure to cut corners.
Use Situation, Task, Action, Result. Describe the pressure or temptation without naming people, explain the choice you made and why, and how you handled the conversation. Keep the focus on your actions, not on judging others.
Sample answer: "Near the end of a quarter, a coworker asked me to record a sale as complete even though the customer hadn't signed yet, so our numbers would look better. I told them I wasn't comfortable doing that and suggested we tell our manager the deal would close the following week. My manager agreed it should wait. The customer signed early in the new quarter, and our records stayed accurate."
Pitfalls: Don't say your ethics have never been tested. Avoid stories that make you sound self-righteous or that share confidential details. Don't pick an example where you went along with the wrong choice and stop there.
Question 24: Describe a time you helped bring a new analyzer, test method or lab computer system into daily use in your lab.
What interviewers listen forLook for hands-on work such as validation runs, comparing results with the old method, or writing procedures, and what changed afterward; only attending a vendor demo is thin.
Candidate tipName the type of instrument or system, what your part was, such as correlation studies or training coworkers, and one result, such as faster turnaround or fewer reruns.
Question 25: Share a time when you successfully used scientific rules or methods to solve a problem at work.
Suggested answerThe interviewer wants to see that you solve problems in a careful, evidence-based way rather than by guessing.
Use Situation, Task, Action, Result. Describe the problem, the idea you formed about its cause, how you tested that idea by changing one thing at a time, and what the results showed.
Sample answer: "Samples from one of our machines kept failing a quality check, but only on some days. I suspected temperature, so I recorded the room temperature and the test results for two weeks. The failures lined up with the warmest afternoons. I then ran test batches at two set temperatures, changing nothing else, and the pattern held. We moved the heat-sensitive runs to the mornings and added better cooling, and the failures stopped."
Pitfalls: Don't jump to a fix without testing the cause. Avoid changing several things at once and claiming one of them worked. Don't use technical terms without a plain explanation.
Question 26: Provide an example of a time when you were able to demonstrate excellent listening skills. What was the situation and outcome?
Suggested answerThe interviewer wants evidence that you listen to understand, not just to reply, and that it makes a difference to your work.
Use Situation, Task, Action, Result. Show what careful listening looked like: letting the person finish, asking follow-up questions, and repeating back what you heard. The outcome should show that listening caught something you would otherwise have missed.
Sample answer: "A manager from another department asked for a monthly report and said they wanted it faster. Instead of starting right away, I asked what they used the report for. They mentioned twice that they only looked at two of the columns. I confirmed that with them, built a one-page summary of just those figures, and it took a third of the time to produce. They used the summary format from then on."
Pitfalls: Don't just describe yourself as a good listener without an example. Avoid an answer where you talk mostly about what you said. Don't leave out the outcome the question asks for.
Question 27: Describe how you handled a nurse or provider who was frustrated with the lab over turnaround time or a rejected specimen.
What interviewers listen forListen for their own efforts to understand the nurse's or provider's concern and give accurate information. A clear outcome and lesson matter; promising to skip required specimen checks is a red flag.
Candidate tipUse a real lab conversation. Briefly explain the nurse's or provider's concern, then focus on how you listened and addressed it. Include the outcome and what you learned about handling these calls.
Question 28: Provide a time when you dealt calmly and effectively with a high-stress situation.
Suggested answerThe interviewer wants to see how you think and act under pressure, and whether you stay effective when things go wrong.
Use Situation, Task, Action, Result. Set the scene quickly: what made it stressful and what was at stake. Spend most of your answer on what you did: how you steadied yourself, what you dealt with first, and who you told. Close with the outcome and what you would repeat.
Sample answer: "An hour before a client presentation, the file with our final numbers was corrupted. I told the team we had a problem and a plan, split the work so two of us rebuilt the charts from the source data while another person checked them, and let the client know we might start a few minutes late. We started on time, and afterward we set up automatic backups for shared files."
Pitfalls: Don't say you never feel stress. Avoid stories where the stress came from your own avoidable mistake unless you explain what you changed. Don't skip the result.
Question 29: How do you balance cooperation with others and independent thinking? Share an example.
Suggested answerThe interviewer wants to see that you can work well with a team while still bringing your own judgment, and that you know when to speak up and when to go along.
Start with a short answer about how you balance the two, then give one example. A good example shows you sharing your own view, listening to others, and then supporting the team's decision even if it wasn't yours.
Sample answer: "I try to form my own view first, share it clearly, and then commit to whatever the group decides. On one project, the team wanted to launch a new form right away. I thought we should test it with a few users first and explained why. We agreed on a one-week trial. Testing found a confusing field, we fixed it, and the full launch went smoothly."
Pitfalls: Don't present yourself as someone who always goes along or always insists on your own way. Avoid a story where you ignored the team's decision. Don't skip the example.
What interviewers listen forTry to determine if the candidate has a cooperative attitude or is otherwise good-natured.
Candidate tipThe employer wants to know that you have a cooperative attitude or are otherwise good-natured.
Question 30: Name a time when you identified strengths and weaknesses of alternative solutions to problems. What was the impact?
Suggested answerThe interviewer wants to see that you weigh options carefully instead of going with the first idea, and that your reasoning leads to better results.
Use Situation, Task, Action, Result. Describe the problem, list two or three options you considered, and give the main strength and weakness of each. Explain which you chose and why, then describe the impact.
Sample answer: "Our team needed a faster way to answer common customer questions. I compared three options: hiring a part-time assistant, writing a help page, or creating email templates. Hiring was quick but costly. A help page would take longer but reduce calls over time. Templates were cheap but only sped up our replies. I recommended the help page, with templates as a short-term fix. Within a few months, repeat questions fell noticeably."
Pitfalls: Don't list options without saying what you compared them on. Avoid choosing an option without explaining the trade-off. Don't leave out the impact.