Location Man Interview Questions
For architects who design buildings across project types, from homes to offices and factories. Interviews focus on turning client needs into designs and coordinating the design team.
30 questions, ranked by what the job needs most
Also for Location Man: Property, Real Estate, and Community Association Managers · compare them →
Print the top 10:Scoring sheetPractice sheet
Question 1: Walk me through how you work with a client to pin down how a building needs to function and how much space each use needs.
Example answerThe interviewer wants to see how you uncover what a building really needs to do, not just what the client asks for first. Describe your process step by step and show it with a real project: interviews with the people who will use the space, visits to their current space, a written space program, and how you confirm it with the client before design starts. Sample answer: "For a community library addition, I met with the director, then held short sessions with staff and a few regular users. I walked the current building on a busy afternoon and saw that the children's area and the study tables competed for the same quiet corner. I wrote a space program listing each room, its size, who uses it and what it must be next to, and the board signed off on it. Separating loud and quiet areas early shaped the whole design." Pitfalls to avoid: describing only the first client meeting; skipping how you get sign-off; giving a process with no real example.
Interviewer tipStrong answers mention questions about users, workflows and growth, plus a written program the client signs off; taking the client's first list at face value is a red flag.
Candidate tipDescribe your steps, such as interviews, visits to the current space, a space program and client sign-off. Use a real project to show something you learned that the client had not said.
Question 2: How do you check a building design against the codes and regulations that apply to the project?
Interviewer tipLook for checks tied to the actual plans, such as tracing exit routes against code requirements, and a way to confirm corrections made it into the permit set. Relying on the permit reviewer to catch problems is a red flag.
Candidate tipStart with how you identify the rules for the project. Use a check on exit routes or insulation to show how you compare the drawings with those rules and follow up on corrections before submitting for a permit.
Question 3: Walk me through the choices that made a set of scale drawings you prepared clear for builders.
Example answerThe interviewer wants to learn how your drawing choices helped builders understand the design and carry out the work accurately.
Build your answer with Situation, Task, Action, Result. Briefly identify the project and the drawing set you prepared. Spend most of the answer on your own choices about scale, dimensions, details and notes. Connect those choices to the builders' needs, then describe feedback or another clear sign of the result. Include something you would improve.
For example: "I prepared scale drawings for an office renovation with several different wall conditions. I needed the builders to distinguish them without guessing. I kept the wall types consistent across plans and details, checked dimensions between sheets and added references to enlarged details. During a drawing review, the contractor could trace the conditions but found one crowded note. I moved that note and checked similar sheets. That taught me to test readability with someone using the set."
Avoid listing software without explaining your decisions, calling drawings clear without evidence, or presenting a team result without identifying your contribution.
Interviewer tipA strong example links their drawing choices to builders' use of the set and a lesson from feedback. Missing dimensions that builders needed is a warning sign.
Candidate tipChoose one drawing set. Explain your choices of scale, dimensions and details, how builders used it, and what their feedback taught you.
Question 4: Tell me about a drawing or specification you prepared for a building contract that gave the contractor clear direction.
Interviewer tipA strong example names a detail or requirement the candidate added and shows how it helped the contractor understand the work. Leaving conflicting directions in the drawings and specifications is a red flag.
Candidate tipPick one contract drawing or specification you helped prepare. Say what the contractor needed to know, what you put in the document to make it clear, and how you knew the contractor could use it.
Question 5: Walk me through a time you fit a structural or mechanical system into an architectural design.
Interviewer tipListen for a change the candidate worked out with the engineers that met the system's needs and kept the space usable. Moving a beam on the plans without checking with the structural engineer is a red flag.
Candidate tipChoose a real case, such as a duct and a beam competing for space above a ceiling. Explain what you changed in the plans with the engineers and how the final layout worked for the system and the space.
Question 6: Describe a time you helped a client understand an architectural drawing they had misread during a design review.
Interviewer tipListen for their use of the drawing, a clear explanation and evidence the client understood. Blaming the client without clarifying the drawing is a red flag; ask what they changed for later reviews.
Candidate tipChoose one client review. Identify what the client misread, then focus on how you explained the drawing and checked their understanding. Include the outcome and a lesson for later reviews.
Question 7: How do you check that a building detail agrees with the floor plans, sections, and elevations before the drawing set is issued?
Interviewer tipExpect checks of dimensions, material descriptions and detail references across views. Leaving conflicting dimensions for the contractor to interpret is a red flag.
Candidate tipWalk through one detail's dimensions, materials and references across the drawing set. Explain how you resolve differences before issuing the final construction plans.
Question 8: Share an example of a time you revised a building layout because two spaces needed to be closer together.
Interviewer tipThe example should connect their layout changes to how the spaces functioned, with a result and lesson. Moving rooms without checking the circulation between them is a warning sign.
Candidate tipChoose a real layout revision. Explain the need for the two spaces to be near each other, your changes and the effect on how people used the building. Close with what you learned about testing adjacencies.
Question 9: What do you weigh when planning the layout of a building, such as site, circulation, daylight and code requirements?
Example answerThe interviewer wants to know how you turn a client's needs and a site's limits into a workable plan. Explain the main factors you weigh, then show how you balance them when they conflict. A useful order is the client's program, the site (orientation, access, slope, views), circulation and exits, daylight and comfort, structure and building systems, and the code and zoning limits that apply. Sample answer: "I start with the program and which spaces need to be next to each other, then test that against the site. On a small office project, the best views faced west, but that meant afternoon glare at the workstations. I put the meeting rooms and break area on the west side and the open office facing north, which kept good daylight and short paths to both exits. I checked travel distances and corridor widths against the local code before showing the client two options." Pitfalls to avoid: listing factors without saying how you trade them off; leaving out codes and exit paths; treating zoning and code rules as the same everywhere.
Interviewer tipStrong answers balance the client's program, site conditions, circulation, exits and codes, and explain tradeoffs; a layout chosen for looks alone is a red flag.
Candidate tipWalk through the factors in the order you consider them, and use a project to show a tradeoff you made, such as moving a stair core to improve daylight or exits.
Question 10: How do you choose which parts of the work to observe during a construction site visit?
Interviewer tipA sound plan considers current work, work about to be concealed and unresolved observations. Waiting until work is covered before planning to observe it is a warning sign.
Candidate tipStart with the construction schedule and work about to be covered up. Explain how prior observations and the drawings help you choose where to focus the visit.
Question 11: Describe how you handled construction that did not match your drawings during a site visit.
Example answerThe interviewer wants to learn how you identify and follow up on construction that differs from your drawings.
Use Situation, Task, Action, Result to organize one real site visit. Identify the discrepancy and your responsibility. Explain your check against the drawings, your communication with the contractor and your record of the issue. Finish with the outcome, including how you checked the correction, and a lesson you carried forward. Be clear about your role in agreeing on the response.
For example: "On an office project, I noticed a partition was being framed in a different location from the floor plan. I checked the current drawing and dimensions before raising it with the contractor. We reviewed the difference together, and I recorded it in my field report. The contractor proposed moving the framing to match the plan. I checked the location on my next visit and recorded the correction. I learned to make field reports precise enough that everyone could identify the same issue."
Avoid assuming a mismatch before checking the current drawings, leaving follow-up unexplained, or claiming that noticing the problem alone resolved it.
Interviewer tipListen for their check against drawings, a recorded discrepancy and follow-up with the contractor. Ignoring a known mismatch is a red flag; a strong example includes the outcome and a lesson.
Candidate tipUse a real site visit. Explain the mismatch, your check of the drawings, your work with the contractor and your field report. Finish with the outcome and what you learned.
Question 12: Give an example of how you caught a problem in a specialist's design before it carried into the architectural plans.
Interviewer tipA useful example traces the problem from their review through correction in the specialist's work. Passing on a known error without follow-up is a red flag; ask how they improved later reviews.
Candidate tipIdentify the specialist's deliverable and the problem you found. Describe your review, the feedback you gave and how you checked the correction. Include the effect on the plans and a lesson for later reviews.
Question 13: Walk me through a time you evaluated a contractor's request for a change in the construction contract.
Interviewer tipLook for their own review of scope, cost or time support and the owner's authority under the contract. Treating the contractor's request as automatic approval is a red flag; the example should include an outcome.
Candidate tipPick one change request. Explain your role, the contract terms and supporting information you checked, and your recommendation to the owner. End with the decision and a lesson from the review.
Question 14: Give an example of how you organized design decisions, cost estimates, and schedule information as a building project changed.
Interviewer tipListen for a record the team could use to trace a design change to its cost and schedule effects. Leaving old and current estimates side by side without marking which one to use is a red flag.
Candidate tipPick a change such as a material substitution. Show where you recorded it, how you kept the cost estimate and schedule in sync with it, and one thing you would improve about your method.
Question 15: Tell me about a time you corrected a scale or unit mismatch when bringing a consultant's drawing into your architectural design.
Interviewer tipA strong example uses known dimensions to verify the correction and explains what they learned. Resizing the consultant's drawing by eye without checking dimensions is a red flag.
Candidate tipUse one real drawing import. Explain how you spotted the scale or unit mismatch, checked the source dimensions and corrected it. Finish with the effect on the design and the check you now use.
Question 16: Talk about a time a three-dimensional model revealed a design problem that was hard to see in two-dimensional drawings.
Interviewer tipListen for their role in creating or examining the model and a specific design correction. Describing only an attractive rendering without a design finding does not answer the question.
Candidate tipUse a real model you helped create. Explain the views or model features that exposed the problem, your design response and the result. Include what this taught you about checking designs in three dimensions.
Question 17: Describe a time a visit to a proposed building site changed your assessment of whether it suited the project.
Interviewer tipA strong example links a site observation, such as slope or access, to a supported suitability recommendation. Dismissing a constraint without checking its effect is a red flag; listen for a result and lesson.
Candidate tipChoose a real site visit. Describe the observed condition, how you checked its effect on the proposed building and how it changed your recommendation. Include the outcome and what you learned to check earlier.
Question 18: What would you do if you found signs of possible structural distress while inspecting an existing building?
Interviewer tipSafety, prompt notice to the owner and qualified structural assessment come first. Declaring the building safe without investigating the signs of distress is a red flag.
Candidate tipPut people's safety first. Explain how you would limit exposure to the suspected hazard, notify the owner and seek a qualified structural assessment without claiming certainty from appearance alone.
Question 19: Tell me how you directed drafters or technicians to prepare accurate drawings or specifications on a project.
Interviewer tipTheir example should show clear assignments, useful reviews and the effect on drawing accuracy. Sending out drawings with known errors is a red flag. Listen for a lesson about directing the team.
Candidate tipPick one project. Describe the assignments and drawing standards you set, your reviews and feedback, and the result. Include a lesson you applied to later work with drafters or technicians.
Question 20: What would you do if a contractor asked a drafting technician to change a construction drawing without your review?
Interviewer tipThe technician should refer the request for review before changing the drawing. Allowing the contractor to bypass design review is a red flag; look for clear direction about who authorizes revisions.
Candidate tipExplain your first instruction to the technician, then how you would review the contractor's request before authorizing any drawing revision. Keep the distinction between a request and an approved change clear.
Question 21: Describe a time you checked whether a client's proposed building would work on its site before design began.
Interviewer tipListen for something they checked, such as whether the site had room for the building and its entrances, and how that shaped their recommendation. Assuming the building would fit without checking the site is a red flag.
Candidate tipPick an early site study and name the constraint you looked at, such as access from the street or space for the proposed building. Explain what you found and how it shaped the client's next decision.
Question 22: Walk me through how you carried an energy or water goal into the drawings and specifications for a green building project.
Interviewer tipListen for a drawing detail or written requirement they developed and how they checked that it supported the goal. A goal stated in the design summary with nothing to back it up in the construction documents is a red flag.
Candidate tipName the energy or water goal and show how it shaped a drawing detail or a written requirement for materials or equipment. Explain how you checked that the finished documents supported the goal.
Question 23: Provide an effective method you have used to incorporate environmentally friendly building practices and/or concepts into your design of structures.
Question 24: Describe an effective environmental structural upgrade you designed.
Question 25: How have you found reliable information about the environmental impact of materials you were considering for a building?
Interviewer tipA strong example shows where they got the information and how they checked that the sources measured comparable impacts. Taking a supplier's green claims at face value is a red flag.
Candidate tipName the materials and the sources you used on one project. Explain a check that made the comparison fair, such as seeing whether the figures covered the same stages of each material's life.
Question 26: Provide an experience in which you accurately calculated potential energy savings. What methods did you use?
Question 27: Share an experience in which you effectively represented a client.
Question 28: Tell me about a operating manual, maintenance manual, study, or report which you prepared. What is one thing you are trying to improve on?
Question 29: Share an example of a proposal or presentation you tailored to win a new architectural project.
Interviewer tipLook for their own choices that connected the client's needs to relevant design work, plus the outcome and a lesson. Claiming project experience the firm did not have is a red flag.
Candidate tipSet out the client's needs, then explain your part in shaping the proposal or presentation. Use specific choices of past work or design approach. End with the outcome and what you learned, even if the firm lost.
Question 30: Share an example of how feedback on an unsuccessful architectural proposal changed your firm's marketing materials.
Interviewer tipLook for their own revisions tied to actual feedback and a way they assessed the revised materials. Inventing project experience to strengthen the firm's claims is a red flag.
Candidate tipUse one lost proposal and the feedback you received. Focus on the changes you made to the firm's marketing materials, how you checked their usefulness and what you learned. Keep the account factual.