Strickler Attendant Interview Questions
For operators who set up and run digital, offset or other printing presses. Interviews focus on learning new equipment, inspecting presses and tracing mechanical problems.
30 questions, ranked by what the job needs most
Print the top 10:Scoring sheetPractice sheet
Question 1: Tell me about a time you brought the first press proofs into color and registration before starting production.
Interviewer tipListen for the proof readings, their own adjustments, and the final check before production. Accepting the first sheet without checking color and registration is a red flag. Ask what they learned from the setup.
Candidate tipUse one press setup. Name the color or registration issue on the first proofs, the adjustments you made, and the checks that showed the press was ready for production.
Question 2: Tell me about a time you caught a setup mistake by checking the print job ticket.
Interviewer tipA strong example names the job ticket detail that exposed the setup mistake and the work it saved. Reusing the last job's settings without checking the current ticket is a red flag.
Candidate tipPick one detail on the job ticket, such as whether to print on one side or both. Say what the press was set up to do and what you changed before the run.
Question 3: How do you check that the paper and ink staged at a press match the job specifications?
Interviewer tipExpect checks of paper labels and ink identification against the job ticket, with mismatches resolved before use. Relying only on where the supplies were stacked is a red flag.
Candidate tipWalk through your paper and ink checks against the job ticket. Name the stock properties and ink details you compare, plus your next step if a label is missing or does not match.
Question 4: Walk me through a time you adjusted ink flow from the ink fountain because the print was coming out too light or too dark.
Interviewer tipListen for a link between the change in ink flow and a visible change on the next samples. Repeatedly changing the flow without checking fresh prints is a red flag.
Candidate tipThe ink fountain holds and feeds ink to the press. Say where the print was too light or dark, what you changed in the ink flow, and how the next sample compared with the approved sample.
Question 5: Recall a time your final check of a stack of printed sheets caught a defect that was easy to miss.
Interviewer tipLook for a specific defect and what catching it changed for the job. Passing the stack along after spotting a defect without checking how much of the stack is affected is a red flag.
Candidate tipChoose a detail such as a faint smudge on the back of a sheet. Explain how you spotted it during the final check and what happened to the affected sheets.
Question 6: Share an example of a press adjustment you made mid-run when the printed colors stopped lining up.
Interviewer tipA strong example links a specific press adjustment to better color alignment on the next sheets. Treating sheets with visibly misaligned colors as good work is a red flag.
Candidate tipName the part of the image where the colors no longer lined up. Describe the adjustment you made during the run and what you saw on the next sample.
Question 7: Describe how you used the feed and tension controls when paper started wandering through the cylinders on a roll-fed press.
Interviewer tipListen for a link between the paper's drift and the setting they changed. Trying to guide the paper by hand near moving cylinders is a red flag.
Candidate tipOn a roll-fed press, paper unwinds from a continuous roll. Describe the drift you saw, which feed or tension setting you changed, and how you knew the paper was running straight again.
Question 8: Give an example of loading a different paper thickness into a sheet-fed press that needed a feeder adjustment.
Interviewer tipA strong answer ties the feeder adjustment to the thickness of the new paper and checks that sheets feed one at a time. Starting the run while the feeder is still pulling two sheets at once is a red flag.
Candidate tipA sheet-fed press takes individual sheets. Name the paper you loaded, the feeder setting you changed for its thickness, and what the first few sheets told you.
Question 9: Describe how you responded when your checks caught color or registration drift during a press run.
Example answerThe interviewer wants to learn whether you catch print defects during a run and respond before more sheets are affected.
Use Situation, Task, Action, Result to organize one real example. Briefly describe the press run and the quality you needed to maintain. Spend most of the answer on the check that revealed the drift, your response and how you checked the next sheets. Include what happened to the affected sheets and what you learned.
For example: "During a press run, I noticed the colors no longer lined up on a pulled sheet. I needed to bring registration back within the job's requirements. I paused the run, checked registration against the approved sheet and made an adjustment. I checked fresh sheets before continuing and separated the sheets printed since the last good check for inspection. The next checks showed stable registration. That experience reminded me to check the printed result after an adjustment instead of assuming the adjustment worked."
Avoid describing only what the crew did, claiming you fixed drift without checking fresh sheets, or leaving out how you handled affected sheets.
Interviewer tipA strong example links a sheet check to the drift, the operator's response and the result. Ignoring sheets printed while color or registration was out is a red flag.
Candidate tipChoose a real press run. Explain the check that revealed drift, your adjustments, how you handled affected sheets and what you learned from checking the result.
Question 10: What would you do if a printing plate shifted in its clamp during the first test impressions?
Interviewer tipThe press should be stopped and made safe before checking the clamp, securing the plate, and rechecking alignment. Reaching into a moving press to tighten the clamp is a wrong first move.
Candidate tipStart with making the press safe. Then describe the clamp and plate checks, the limits of repairs you would attempt, and the test impressions needed before production.
Question 11: Share an experience in which you effectively changed press plates, blankets, and/or cylinders.
Question 12: Describe a time you changed a saved job setup at a press control terminal for a repeat order with new specifications.
Interviewer tipA clear example names the changed specifications, the terminal settings they updated, and the result of their checks. Assuming a repeat order needs no review of saved settings is a red flag.
Candidate tipChoose a repeat job whose specifications changed. Explain which saved terminal settings you changed, how you checked the entries, and whether the press setup matched the revised order.
Question 13: Provide an experience in which you effectively monitored an automated press operation system.
Question 14: Tell me about a time an inspection of rollers, blankets or plates helped you find the cause of a print problem.
Example answerThe interviewer wants to know whether you can trace a print defect back to the part of the press causing it. Use Situation, Task, Action, Result: the defect, the parts you checked, what you found, and the result after the fix. Show that you look at the hardware, not only at ink settings. Sample answer: "We were getting a light streak across every sheet on an offset job. Adjusting the ink didn't help, so I stopped the press, locked it out, and checked the rollers and blanket on that unit. The blanket had a low spot from a sheet that had wrapped around it earlier. I replaced the blanket, reset the packing, and pulled new sheets. The streak was gone, and I noted the blanket change in the press log so the next shift knew." Pitfalls to avoid: Don't jump to the fix without explaining how you found the cause. Don't skip safety steps such as lockout when you describe working inside the press. Don't pick a defect you never actually solved.
Interviewer tipA strong answer links a visible defect, like streaks or a smash, to a part they checked and fixed; only turning ink keys without looking at the hardware is a red flag.
Candidate tipStart with the defect on the sheet, explain which parts you checked and what you found, then what you replaced or adjusted and how the next sheets looked.
Question 15: Describe your experience cleaning ink fountains, plates, and/or printing unit cylinders. How about cleaning and oiling presses?
Question 16: Describe your experience mising inks and filling ink fountains.
Question 17: Tell me about a time you found and fixed a mechanical problem on a press, such as a worn gripper, bearing or chain.
Example answerThe interviewer wants to know whether you can diagnose and fix minor mechanical problems on a press, and when you call maintenance instead. Use Situation, Task, Action, Result: the symptom, how you traced it, the repair, and how you checked it. Sample answer: "Sheets on our sheetfed press started landing crooked in the delivery, and some were marked. I watched the press at slow speed and saw one gripper bar wasn't holding the sheet evenly. After locking out the press, I found a worn gripper pad. I replaced it with a spare from our parts kit, set the gripper tension to the manual's spec, and ran test sheets at low and full speed. Delivery was square again, and I logged the repair and told maintenance so they could check the other bars at the next service." Pitfalls to avoid: Don't skip lockout or other safety steps. Don't describe swapping parts by guesswork until something worked. Don't claim repairs that your shop leaves to maintenance staff or the manufacturer's technician.
Interviewer tipListen for a clear diagnosis before the fix and knowing when to call maintenance; replacing parts by guesswork or skipping lockout is a red flag.
Candidate tipSay what symptom you noticed, how you traced it to the part, what you did with hand tools, and how you checked that the press ran right afterward.
Question 18: Tell me about a time when you successfully determined the cause of an operating error at your company and solved the problem.
Example answerThe interviewer wants to see how you track down the real cause of a problem instead of treating only the symptoms.
Use Situation, Task, Action, Result. Describe the error and its impact, the steps you took to narrow down the cause, the fix, and what you did to keep it from happening again.
Sample answer: "Our label printer started putting the wrong dates on some product labels, which meant those items had to be pulled from the shelves. I checked the printer settings first, and they were fine. Then I compared the bad labels and saw they all came from orders entered after a software update. The update had changed the date format in one field. I worked with our IT contact to fix the setting, reprinted the labels, and added a quick label check to our start-of-shift routine."
Pitfalls: Don't stop at the first fix that seemed to work. Avoid blaming coworkers. Don't leave out how you prevented a repeat.
Question 19: Describe how you learned to run a printing press or press control console that was new to you.
Example answerThe interviewer wants to see how you learn unfamiliar equipment safely and how soon you become reliable on it. Explain the steps you took: what was new, how you learned it, and how you showed you were ready to run on your own. The manufacturer's manual, a senior operator, and supervised practice runs all count. Sample answer: "When my shop added a digital press, I had only run offset before. I read the operator guide's sections on color settings and daily maintenance, then shadowed the lead operator on short jobs for about a week. I kept notes on the startup checks and the error messages we ran into. After that, I ran simple jobs while the lead checked my work, and within a few weeks I was running the press on my own shift." Pitfalls to avoid: Don't claim you learned it alone on live jobs with no help. Don't skip the safety and maintenance side. Don't stay vague about what was new to you.
Interviewer tipListen for how they used the manual, a senior operator and supervised runs before running alone; a candidate who learned by trial and error on live jobs is a red flag.
Candidate tipName the press type and what was new to you, then walk through how you learned it, such as shadowing, the manual or test runs, and when you started running jobs on your own.
Question 20: Walk me through how you handled a press breakdown during a job with a tight deadline.
Example answerThe interviewer wants to learn whether you stay calm and make safe, practical decisions when a press breakdown threatens a deadline.
Use Situation, Task, Action, Result for one actual breakdown. Set out the deadline and the problem briefly, then explain your actions in order. Describe how you secured the press, contacted the people who could help and kept the person responsible for scheduling informed. End with the job's outcome and what you learned about working under pressure.
For example: "The press stopped feeding sheets during a job due that afternoon. I stopped it using the shutdown procedure and called maintenance with the symptoms. I told my supervisor where the job stood so they could reassess the schedule. While maintenance worked, I checked the completed sheets and organized the remaining stock. Once the press was cleared to run, I checked the first sheets before continuing. The job finished later than planned, but my supervisor had time to update the customer. I learned that clear updates helped me stay focused."
Avoid presenting risky repairs as initiative, blaming maintenance for the delay, or giving only a hypothetical response.
Interviewer tipListen for the operator's own calm steps to stop the press safely, get help and update the deadline. Running a faulty press to save time is a red flag.
Candidate tipUse one actual breakdown. Cover the deadline, your actions in order, who you contacted and how the job finished; include what you learned about staying calm.
Question 21: Tell me about a time you went beyond what was expected to get a rush print job out on time.
Interviewer tipLook for real extra effort, like prepping the next makeready early or staying to finish, without cutting quality checks; skipping proofs to hit the deadline is a red flag.
Candidate tipDescribe the job, the deadline, what you did beyond your usual duties, and how you kept the quality up while working faster.
Question 22: Tell me about a time you had to tell a supervisor or customer that a print run did not meet the job specs.
Example answerThe interviewer wants to know whether you report quality problems early and honestly, even when the news is unwelcome. Use Situation, Task, Action, Result: what went wrong, when and how you raised it, what you proposed, and how it was resolved. Sample answer: "Partway through a run of postcards, I noticed the image had shifted slightly from the proof, so some cards would trim with a thin white edge. I stopped the press and checked my plates and settings first to make sure it wasn't my setup. Then I brought a press sheet and the proof to my supervisor, explained how many sheets were affected, and said I could fix it by remounting the plate. We let the customer service rep know, reprinted the bad sheets, and the order still shipped on time." Pitfalls to avoid: Don't wait until the job is done to mention it. Don't blame prepress or another operator without checking your own setup first. Don't leave out what you suggested to fix it.
Interviewer tipA strong answer raises the problem early, with facts and a plan to fix it; hiding bad sheets or blaming prepress without checking is a red flag.
Candidate tipSay what went wrong, how and when you raised it, what you proposed to fix it, and how the person reacted.
Question 23: When several jobs are waiting for your press, how do you decide the order to run them in?
Example answerThe interviewer wants to see that you can plan your press time to meet deadlines and cut waste. Explain what you weigh, then give a short example. Common factors are due dates, the supervisor's schedule, makeready time, and grouping jobs that share paper size, stock or ink colors so you change over less. Sample answer: "I start with the schedule from my supervisor and the due dates on the job tickets. Then I look for jobs I can group. If two jobs use the same stock and the same spot color, I run them back to back so I don't wash up and change paper in between. One day I had three jobs waiting, and two shared a spot blue. I asked my supervisor if I could run those two first, and we saved a full washup and finished all three on time." Pitfalls to avoid: Don't ignore the supervisor's priorities or change the order without asking. Don't talk only about speed and forget quality checks. Don't give a rule with no example.
Interviewer tipListen for due dates, makeready time, and grouping jobs by stock, size or ink to cut changeovers; ignoring the supervisor's schedule is a red flag.
Candidate tipWalk through what you weigh, such as due dates, paper and ink changes and plate swaps, and give an example of a day you reordered jobs and why.
Question 24: Describe a recent press setup that needed careful work with your hands, such as changing plates or threading paper.
Interviewer tipListen for their own hand work, the checks that kept the press safe to work on and a successful setup. Reaching into moving rollers is a red flag.
Candidate tipPick one press setup you did. Explain the hand adjustments or threading you performed, how you kept your hands clear of moving parts and how you checked the finished setup.
Question 25: Share an experience in which you identified environmental factors that would impact equipment performance. How did you make adjustments to counteract these factors?
Question 26: What is the state of your time and/or production records? What is something you would like to improve?
Question 27: Share an example of how you spotted a printing supply shortage early enough to keep a press job on schedule.
Interviewer tipListen for their own stock check, a timely request for paper, ink, or another printing supply, and the job's outcome. Waiting until the press runs out despite a known shortage is a red flag.
Candidate tipName the printing supply, the stock check that revealed the shortage, and how you requested more in time. End with the effect on the scheduled job and any change you made to future checks.
Question 28: Tell me about the last time you performed routine maintenance on equipment. How did you determine when and what type of work was needed?
Example answerThe interviewer wants to see that you keep equipment in good shape on a schedule and can tell when extra care is needed.
Use Situation, Task, Action, Result. Name the equipment and explain how you decided when and what to do, such as the manufacturer's schedule, hours of use, checklists, or warning signs like noise, heat, or leaks. Then describe the work and how it helped.
Sample answer: "I was responsible for weekly maintenance on two forklifts. I followed the schedule in the manual and kept a log of hours and fluid levels. During one weekly check, I noticed the hydraulic fluid was lower than the week before, so I added an inspection of the hoses. I found one starting to crack, tagged the forklift out of service, and replaced the hose before it failed. Keeping the log is what made the change easy to spot."
Pitfalls: Don't describe maintenance as only fixing things after they break. Avoid skipping safety steps such as lockout. Don't forget to explain how you decided what work was needed, since the question asks.
Question 29: Provide an experience in which you repaired a press.
Question 30: Share an experience in which you conducted a test of a product, service, or process and successfully improved the quality or performance.
Example answerThe interviewer wants evidence that you test things carefully and use what you find to make them better.
Use Situation, Task, Action, Result. Explain what you tested and why, how you set up the test, what the results showed, and what you changed. End with how you measured the improvement.
Sample answer: "Customers kept saying our online order form was confusing, so I was asked to look into it. I had five coworkers who had never used the form place a test order while I watched and took notes. Four of them got stuck on the same shipping step. I suggested moving that step and rewording two labels, then ran the same test again. All five finished without help, and complaints about the form dropped over the next month."
Pitfalls: Don't describe a change made on a hunch with no test. Avoid skipping how you checked the result. Don't use jargon without explaining it.