Equipment Technician Interview Questions
For staff who prepare equipment for labs and patient care. Interviews focus on inspecting, cleaning and sterilizing equipment and putting together surgical instrument trays.
30 questions, ranked by what the job needs most
Also for Equipment Technician: Audio and Video Equipment Technicians · Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic · compare them →
Print the top 10:Scoring sheetPractice sheet
Question 1: Walk me through a time you cleaned a surgical instrument with areas that were hard to reach.
Interviewer tipThe example should show their cleaning steps for the instrument's hard-to-reach areas and the result. Assuming the sterilizer will remove soil they could not reach is a red flag.
Candidate tipChoose one instrument with a narrow channel, hinge or other hard-to-reach area. Explain the cleaning instructions and tools you used, your own actions, the result and what you learned.
Question 2: Walk me through a time you assembled a surgical tray that called for several sizes of the same instrument.
Interviewer tipListen for how the candidate kept similar instruments separate and verified the required count for each size. A correct total can still hide a missing size.
Candidate tipName the tray and the instruments that were easy to mix up. Describe how you sorted them and used the tray count sheet to check each size before you finished the tray.
Question 3: How have you kept a steam sterilizer running safely on a busy shift when routine upkeep was due?
Interviewer tipListen for upkeep and a check that fits the sterilizer, such as cleaning the drain screen and reviewing the air-removal test on a vacuum unit. Skipping a required test to catch up on loads is a red flag.
Candidate tipName the upkeep you did, such as cleaning the chamber drain screen. Explain which check let you resume the waiting loads, such as an air-removal test to see if steam could reach the load in a vacuum sterilizer.
Question 4: Share an example of how you spotted a surgical instrument that needed repair before it went back into a tray.
Interviewer tipA good example identifies the damage or failed function that called for repair. Packing an instrument with a known defect because the tray is due is a red flag.
Candidate tipName the instrument and the fault you noticed, such as a stiff hinge or a chipped tip. Say what told you it needed repair and how you kept it out of the tray once you found the problem.
Question 5: What do you check to decide whether stored sterile supplies are still suitable for use?
Interviewer tipExpect checks of assigned dates and package integrity, using the facility's shelf-life rules. Leaving a torn or wet package available because its printed date has not passed is a red flag.
Candidate tipExplain how you check labels and any assigned expiration dates, then examine packaging for tears, moisture, or broken seals. Describe how the facility's shelf-life rules guide the decision to remove an item from stock.
Question 6: What information do you record so a sterilizer test result can be traced to the right sterilizer and test?
Interviewer tipListen for test type, date, sterilizer ID, result and the load or cycle reference when applicable. A result entered against the wrong sterilizer cannot support reliable tracking.
Candidate tipDescribe the fields you complete in the sterilizer test log and how you match the result to the correct equipment and test. Include your check for missing or incorrect entries.
Question 7: Share an example of a labeling error you caught before a sterile tray was sent out.
Interviewer tipA strong example shows what the candidate compared the label with and how they kept the tray from going out with the wrong details. Guessing at a missing load number is a red flag.
Candidate tipName the label detail that was wrong, such as the tray name or load number. Explain what you checked to confirm the error and what happened to the tray.
Question 8: Tell me about a time you found damage or leftover debris on an instrument while inspecting it before packing.
Example answerThe interviewer wants to see that you inspect instruments closely and never let a dirty or damaged one go into a set. Use Situation, Task, Action, Result. Name the instrument, what you looked for, what you found, and what you did with it. Sample answer: "While inspecting a set of laparoscopic instruments after they came out of the washer, I checked the jaws and hinges under a lighted magnifier. One grasper still had a small amount of dried tissue in the hinge, and another had a crack in its insulation. I sent the grasper back for manual cleaning and ran it through again. I tagged the cracked instrument, took it out of service, and told my lead so it could go for repair. I replaced it in the set with a spare so the tray could still go out complete." Pitfalls to avoid: describing a quick look rather than a careful check; packing the item and hoping it would be fine; forgetting to say how the set was kept complete.
Interviewer tipStrong answers mention magnification or close checks of hinges, tips and lumens, and pulling the item from service; packing it anyway is a red flag.
Candidate tipName the kind of instrument, what you saw, and what you did next, such as recleaning it, tagging it, or sending it for repair.
Question 9: Walk me through how you responded to a problem you spotted in a sterilizer test or indicator result.
Example answerThe interviewer wants to learn whether you notice sterilization problems and act on the results before affected instruments are used.
Use Situation, Task, Action, Result to organize one real example. Briefly describe the test or indicator and your responsibility for checking it. Spend most of the answer on what you noticed, how you handled the affected items, who you notified, and how you recorded the issue. Finish with the outcome and what you learned.
For example: "While checking a tray after a cycle, I found an indicator that had not reached its expected endpoint. I kept the tray from being released and notified my supervisor. I checked the cycle record with them and documented the indicator result. We followed our procedure to identify the affected items and arrange reprocessing. The tray stayed on hold until the required checks were satisfactory. That reinforced the need to check each result before release."
Avoid guessing that a load is safe, describing only what your team did, or leaving out how the problem was resolved.
Interviewer tipListen for their steps to hold affected items, check the sterilizer result, and report the problem, plus what they learned. Releasing items despite an unresolved failed indicator is a red flag.
Candidate tipChoose one real sterilizer test or indicator problem. Explain what you noticed, how you handled the affected load, the result, and what you learned.
Question 10: How do you make sure the instruments you clean and sterilize meet your department's standards and the manufacturer's instructions?
Example answerThe interviewer wants to know that you follow written instructions for each instrument and know what to do when you are unsure. Explain your routine: where you find instructions, how you follow them, and how you check your own work. Then give one short example. Sample answer: "I follow our department's written procedures for each type of instrument, and for anything unfamiliar I look up the manufacturer's instructions for use before I start. Those tell me how to take it apart, how to clean it, and which sterilization method and cycle it can take. When we got a new powered drill, I read its instructions and saw it couldn't be soaked, so I asked my lead to show me the right way to clean it. I also check my own work at inspection and ask a coworker when I'm not sure." Pitfalls to avoid: saying you know every instrument by memory; naming one set of rules as if it applies everywhere, since standards and policies vary by facility and state; leaving out what you do when something is unclear.
Interviewer tipA strong answer names checking instructions for use, following written procedures, and asking when unsure; relying on memory for every item is a red flag.
Candidate tipExplain where you look up instructions for an unfamiliar instrument, how you follow the steps, and what you do when something isn't clear.
Question 11: Provide an experience in which you disinfected and sterilized equipment.
Question 12: Share an effective method you have used to ensure that equipment is operating to prescribed standards.
Question 13: What information belongs in a repair request for a washer-disinfector that stops midcycle?
Interviewer tipA useful report identifies the washer-disinfector, cycle stage, alarm message, and observed fault so repair staff can act. Reporting only 'the washer is broken' without identifying the machine leaves the fault hard to follow up.
Candidate tipExplain how you identify the washer-disinfector and record the cycle stage, displayed alarm, and observed fault. Describe how you get those details to your supervisor or repair staff without guessing at the cause.
Question 14: How do you decide what to process first when several trays are needed for upcoming surgeries and other work is waiting?
Interviewer tipA strong answer checks the surgery schedule, puts urgent cases and short-supply sets first, and tells others about delays; working first come, first served is a red flag.
Candidate tipExplain what you look at to set priorities, such as case times and how many sets you have, and give an example of a busy shift.
Question 15: Tell me about a time you had to tell the OR or a nurse that a tray or piece of equipment would be late or wasn't ready.
Example answerThe interviewer wants to know that you share bad news early and clearly, because a late tray can delay a surgery or patient care. Use Situation, Task, Action, Result. Explain what went wrong, how fast you told them, and what option you offered. Sample answer: "One morning, a tray needed for a case later that day failed inspection because one instrument still had debris on it after the wash. I knew reprocessing would make it late. I held the tray and promptly told my lead and asked them to hold and check the rest of that washer load. I called the OR charge nurse, explained the delay and gave an estimate based on the remaining reprocessing steps. I checked for a matching backup set and verified its ready status before offering it to the nurse. I kept the OR informed while my lead coordinated checks on the load. The nurse accepted the verified backup set, and I confirmed its delivery. The original tray stayed on hold for reprocessing." Pitfalls to avoid: waiting until the last minute to speak up; giving a vague answer about when it would be ready; blaming coworkers instead of fixing the problem.
Interviewer tipListen for telling them early, giving a clear reason and a realistic time, and offering an option such as a backup set; hiding the delay is a red flag.
Candidate tipExplain what went wrong, how and when you told them, what option you offered, and how the case or patient care was affected.
Question 16: Tell me about a time you had to handle delicate instruments, such as scopes or fine surgical tools, without damaging them.
Interviewer tipA strong answer shows care with tips, lenses and cables, and keeping heavy items off delicate ones; rushing or stacking instruments is a red flag.
Candidate tipDescribe the instruments, what makes them easy to damage, and the specific steps you took when cleaning, moving or packing them.
Question 17: Share an experience in which you successfully maintained records of inventory.
Question 18: Tell me about a time you learned to use a new sterilizer, washer or other piece of processing equipment.
Interviewer tipLook for using the manual, training or a coworker, and practicing under supervision before running it alone; learning by trial and error is a red flag.
Candidate tipName the type of equipment, how you learned it, any mistakes you avoided, and how long it took before you ran it on your own.
Question 19: How do you use a flushing adapter to clear debris from a reusable surgical suction tube?
Interviewer tipExpect a compatible adapter, water flow within the tube maker's limits, and a check for remaining debris. Increasing pressure beyond those limits to force water through a blockage risks damaging the tube.
Candidate tipWalk through attaching the flushing adapter, directing the outlet to contain splashes, and using the tube maker's water temperature and pressure limits. Explain how you check the lumen for remaining debris.
Question 20: Describe a time you used a hospital in-service session to clear up something you did not understand about instrument processing.
Interviewer tipTheir example should show how they used the in-service instructor or demonstration to resolve a specific gap in processing knowledge. Merely listing sessions attended gives no evidence that they understood the material.
Candidate tipPick one hospital in-service session and a processing step you found unclear. Describe the question you raised or demonstration you requested, then explain what became clear and what you learned.
Question 21: Tell me about a time you helped a nurse or other staff member who urgently needed equipment or supplies.
Interviewer tipListen for how they confirmed the nurse's equipment request, found or prepared the item, and checked readiness. Sending unchecked equipment or the wrong requested item is a red flag.
Candidate tipDescribe the request, what you did to find or prepare the item quickly, how you delivered it, and how it helped the staff member.
Question 22: Describe a time you worked through a complaint from a surgeon or OR nurse who was upset with you about an instrument or tray.
Example answerThe interviewer wants to learn how you handle an upset surgeon or OR nurse while keeping attention on the instrument or tray problem.
Build your answer around Situation, Task, Action, Result. Set up one real complaint and explain your role. Describe your own words and actions, including how you understood the concern and worked toward a solution. End with the outcome and a lesson you used afterward.
For example: "An OR nurse was upset with me because a tray did not contain an instrument they expected. I listened without interrupting and acknowledged the disruption. I checked the tray list and confirmed which instrument was needed. I contacted my supervisor to arrange the correct sterile instrument and kept the nurse informed. Afterward, we found that the tray list needed clarification. I learned to raise unclear tray requirements before assembly rather than assume everyone understood the list the same way."
Avoid blaming the surgeon or nurse, turning the answer into a defense of yourself, or claiming a solution without explaining your part in it.
Interviewer tipA real example should show how they stayed calm, addressed the instrument or tray complaint, and learned from the outcome. Arguing with the surgeon or OR nurse instead of addressing the concern is a red flag.
Candidate tipPick one real complaint about an instrument or tray. Briefly explain why the surgeon or OR nurse was upset, then focus on your response, the outcome, and what you learned.
Question 23: Provide an example when your ethics were tested.
Example answerThe interviewer wants to know whether you do the right thing when it is inconvenient, and how you handle pressure to cut corners.
Use Situation, Task, Action, Result. Describe the pressure or temptation without naming people, explain the choice you made and why, and how you handled the conversation. Keep the focus on your actions, not on judging others.
Sample answer: "Near the end of a quarter, a coworker asked me to record a sale as complete even though the customer hadn't signed yet, so our numbers would look better. I told them I wasn't comfortable doing that and suggested we tell our manager the deal would close the following week. My manager agreed it should wait. The customer signed early in the new quarter, and our records stayed accurate."
Pitfalls: Don't say your ethics have never been tested. Avoid stories that make you sound self-righteous or that share confidential details. Don't pick an example where you went along with the wrong choice and stop there.
Question 24: Share an example of when you went above and beyond the "call of duty".
Interviewer tipLook for answers that show the candidate is dependable.
Candidate tipThe employer wants to know that you are dependable.
Question 25: How do you balance cooperation with others and independent thinking? Share an example.
Example answerThe interviewer wants to see that you can work well with a team while still bringing your own judgment, and that you know when to speak up and when to go along.
Start with a short answer about how you balance the two, then give one example. A good example shows you sharing your own view, listening to others, and then supporting the team's decision even if it wasn't yours.
Sample answer: "I try to form my own view first, share it clearly, and then commit to whatever the group decides. On one project, the team wanted to launch a new form right away. I thought we should test it with a few users first and explained why. We agreed on a one-week trial. Testing found a confusing field, we fixed it, and the full launch went smoothly."
Pitfalls: Don't present yourself as someone who always goes along or always insists on your own way. Avoid a story where you ignored the team's decision. Don't skip the example.
Interviewer tipTry to determine if the candidate has a cooperative attitude or is otherwise good-natured.
Candidate tipThe employer wants to know that you have a cooperative attitude or are otherwise good-natured.
Question 26: Provide a time when you dealt calmly and effectively with a high-stress situation.
Example answerThe interviewer wants to see how you think and act under pressure, and whether you stay effective when things go wrong.
Use Situation, Task, Action, Result. Set the scene quickly: what made it stressful and what was at stake. Spend most of your answer on what you did: how you steadied yourself, what you dealt with first, and who you told. Close with the outcome and what you would repeat.
Sample answer: "An hour before a client presentation, the file with our final numbers was corrupted. I told the team we had a problem and a plan, split the work so two of us rebuilt the charts from the source data while another person checked them, and let the client know we might start a few minutes late. We started on time, and afterward we set up automatic backups for shared files."
Pitfalls: Don't say you never feel stress. Avoid stories where the stress came from your own avoidable mistake unless you explain what you changed. Don't skip the result.
Question 27: Provide an experience that demonstrates your ability to manage time effectively. What were the challenges and results?
Example answerThe interviewer wants to know how you plan your time and handle competing demands, and whether you meet deadlines.
Use Situation, Task, Action, Result. Name the specific challenges, such as overlapping deadlines or interruptions. Describe the steps you took to plan and protect your time, and what you did when something came up. End with the results the question asks for.
Sample answer: "During one busy week, I had a report due Thursday, two new team members to train, and my usual daily tasks. I mapped out the week on Monday, scheduled training for the mornings when things were quieter, and blocked two afternoons for the report. When an urgent request came in Wednesday, I asked a colleague to cover one training session. The report went in a day early, and both new team members finished their training on schedule."
Pitfalls: Don't just list time-management tools. Avoid a story where you met the deadline only by working through the night. Don't skip the challenges.
Question 28: Provide an example of a time when you were able to demonstrate excellent listening skills. What was the situation and outcome?
Example answerThe interviewer wants evidence that you listen to understand, not just to reply, and that it makes a difference to your work.
Use Situation, Task, Action, Result. Show what careful listening looked like: letting the person finish, asking follow-up questions, and repeating back what you heard. The outcome should show that listening caught something you would otherwise have missed.
Sample answer: "A manager from another department asked for a monthly report and said they wanted it faster. Instead of starting right away, I asked what they used the report for. They mentioned twice that they only looked at two of the columns. I confirmed that with them, built a one-page summary of just those figures, and it took a third of the time to produce. They used the summary format from then on."
Pitfalls: Don't just describe yourself as a good listener without an example. Avoid an answer where you talk mostly about what you said. Don't leave out the outcome the question asks for.
Question 29: Share an experience in which you successfully coordinated with others. How about a coordination effort that was not as successful?
Example answerThe interviewer wants to see how you work with others to line up schedules, tasks, and handoffs, and whether you learn from times it didn't work.
The question asks for two stories, so keep each one short. For the success, explain who was involved, how you kept everyone in step, and the result. For the less successful one, say what went wrong, your part in it, and what you now do differently.
Sample answer: "For an office move, I set up a shared timeline with the facilities, technology, and department leads, and held a 15-minute check-in each week. Everyone was set up and working by Monday morning. Earlier, on a smaller project, I assumed a vendor knew our deadline and didn't confirm it. Their delivery came two days late. Since then I confirm key dates in writing with everyone involved."
Pitfalls: Don't spend all your time on the success. Avoid blaming others for the one that went wrong. Don't skip what you learned.
Question 30: Tell me about the last time you performed routine maintenance on equipment. How did you determine when and what type of work was needed?
Example answerThe interviewer wants to see that you keep equipment in good shape on a schedule and can tell when extra care is needed.
Use Situation, Task, Action, Result. Name the equipment and explain how you decided when and what to do, such as the manufacturer's schedule, hours of use, checklists, or warning signs like noise, heat, or leaks. Then describe the work and how it helped.
Sample answer: "I was responsible for weekly maintenance on two forklifts. I followed the schedule in the manual and kept a log of hours and fluid levels. During one weekly check, I noticed the hydraulic fluid was lower than the week before, so I added an inspection of the hoses. I found one starting to crack, tagged the forklift out of service, and replaced the hose before it failed. Keeping the log is what made the change easy to spot."
Pitfalls: Don't describe maintenance as only fixing things after they break. Avoid skipping safety steps such as lockout. Don't forget to explain how you decided what work was needed, since the question asks.