Storm Chaser Interview Questions
For meteorologists and atmospheric scientists in forecasting and research. Interviews focus on interpreting weather data, using forecast models, and issuing warnings.
30 questions, ranked by what the job needs most
Print the top 10:Scoring sheetPractice sheet
Question 1: Walk me through how you combine observations, model output and your knowledge of atmospheric physics to build a forecast.
Example answerThe interviewer wants to see a clear, repeatable forecast process grounded in physics, not just copying a model. Walk through your steps in order: observations, model comparison, your own reasoning, and the final call.
Sample answer: "I start with what is happening now: surface observations, the latest upper-air soundings, satellite and radar. That tells me which models have the current setup right. Then I compare several models and their ensembles, looking at where they agree and where they spread apart. If one model handles the timing of a cold front better against the latest observations, I weight it more. I use what I know about the physics, such as how a sea breeze or the terrain will change the wind, to adjust the raw output for my area. Finally I set the forecast, note my confidence, and check it against what actually happens so I learn which guidance to trust next time."
Pitfalls to avoid: describing a single model as your whole process; listing tools without explaining how you weigh them; leaving out how you check and learn from your forecasts.
Interviewer tipA strong answer starts with current observations, compares several models and explains why one is trusted more that day; leaning on a single model without checking it is a red flag.
Candidate tipUse a recent forecast as the example. Go step by step: what data you checked first, how you compared models, where you adjusted their output, and why.
Question 2: What would you do if a forecast showed surface temperatures below freezing but a layer of warm air above during incoming precipitation?
Interviewer tipThey should examine the full temperature profile and its uncertainty before judging precipitation type and icing risk. Assuming snow from the surface temperature alone is a red flag.
Candidate tipStart with the depth and temperature of the warm and cold layers. Explain how observations and changing conditions would shape your precipitation forecast and the icing risk you communicate.
Question 3: How do you tailor a forecast briefing for a road crew deciding when to treat roads for ice?
Interviewer tipListen for a briefing that gives the crew time to act and explains where and when icing could start. Giving only a regional low temperature leaves the crew without the timing it needs.
Candidate tipStart with when the crew needs to make its decision. Explain how you choose which roads and hours to cover and how you communicate uncertainty about when ice could form.
Question 4: Tell me about a time you gave a public weather forecast or warning on air or online.
Interviewer tipListen for plain language about who would be affected and when, with a clear action if there was a warning. Giving a warning without saying where it applies can leave people guessing.
Candidate tipPick one update and give an example of the words you used to make the location and timing clear. If it was a warning, include the action you asked people to take.
Question 5: Walk me through a time you pulled together observations from sources like weather stations and radar for a forecast.
Interviewer tipA strong example shows which observations they gathered, how they checked timestamps and coverage, and what data they ended up using. Treating old radar images as current is a red flag.
Candidate tipPick one forecast from work or a course lab. Name the observations you gathered, show how you checked that they covered the right area and time, and say which ones you used.
Question 6: Share an example of how you tested a change to a weather model before relying on it for forecasts.
Interviewer tipListen for their own comparison with observations and an unchanged model, tests on cases outside development, and a lesson from the results. One successful forecast is not enough to validate a model change.
Candidate tipChoose one model change from work or a research project. Describe your test cases, the comparison you made, and what the results led you to keep or revise.
Question 7: Tell me about a time the forecast models disagreed and you had to decide which guidance to trust.
Example answerThe interviewer wants to see how you reason under uncertainty and still make a call. Use Situation, Task, Action, Result: the setup, the disagreement, how you decided, and how it turned out.
Sample answer: "Before a winter storm, one model brought the rain-snow line well south of our city while another kept us mostly rain. I had to issue the snow forecast for the afternoon briefing. I checked the morning soundings and surface temperatures and found the colder model had the low-level temperatures closer to what we were seeing. I also looked at which way the ensemble members leaned. I forecast mostly snow, noted that a small shift north would mean much less, and gave a range rather than one number. Snow did fall, though totals ended near the low end of my range. In the review I saw the warm layer aloft was stronger than expected, and I watch that layer more closely now."
Pitfalls to avoid: averaging model outputs without checking model skill, current observations or physical plausibility; hiding a forecast that missed instead of explaining what you learned; skipping how you shared the uncertainty.
Interviewer tipListen for how they compared the models with observations and past performance, and how they shared the uncertainty; picking a model out of habit is a red flag.
Candidate tipDescribe the setup, what each model showed, the data you checked to break the tie, what you forecast, and how it turned out, even if you got it wrong.
Question 8: What is the most challenging part of developing or using computer models for weather forecasting?
Example answerThe interviewer wants to know you understand the limits of models and work with them thoughtfully. Name one real challenge, explain why it happens, and say how you deal with it.
Sample answer: "For me the hardest part is knowing when a model is wrong before the weather proves it. Every model has limits, such as grid spacing too coarse for small features like thunderstorms or valley fog, and starting data that misses what is happening in sparse areas. In my last role I noticed one model kept bringing overnight lows too warm on clear, calm nights in our valleys. I checked several past cases against station data, confirmed the pattern, and started adjusting for it in those setups. I also shared what I found with the team so we all handled it the same way. Now I look at how each model has done recently before I lean on it."
Pitfalls to avoid: saying there is no real challenge; blaming the models without showing how you compensate; using technical terms you can't explain in a follow-up question.
Interviewer tipListen for concrete limits such as resolution, known biases or poor starting data, and how they adjust for them; an answer that treats model output as always right is a red flag.
Candidate tipName one specific limitation you have run into, such as a model's bias in certain weather setups, and explain how you spotted it and what you do about it now.
Question 9: Walk me through a weather or climate prediction you made using environmental data.
Interviewer tipListen for a clear link between the data and the prediction, along with any limits the candidate recognized. Ignoring data that weakens the prediction is a red flag.
Candidate tipPick a prediction from work or research. Name the data you used, explain which signals shaped the prediction, and say how it held up if you had later observations.
Question 10: Walk me through the methods you used in a research project on an atmospheric process, such as storm formation or fog.
Example answerThe interviewer wants to see that you can plan and carry out sound research, from question to conclusion. Walk through the project in order: the question, the data, the methods, how you checked the results, and what you found.
Sample answer: "For my senior project I studied why fog formed at a regional airport on some clear nights but not others. I gathered several years of hourly surface observations and nearby soundings, then sorted nights into fog and no-fog cases. I compared wind speed, low-level moisture and the strength of the overnight temperature inversion between the two groups, and used simple statistics to see which differences held up. Light winds and a strong inversion stood out most. I tested the pattern on a year I had held back, and it worked fairly well but missed some fog that drifted in from nearby water. That taught me to look at moisture moving in, not just local cooling."
Pitfalls to avoid: listing methods without the research question; claiming results stronger than your data supports; leaving out the limits of your work or what you would do next.
Interviewer tipLook for a clear research question, data and methods chosen to answer it, and how they checked their results; listing techniques with no link to the question is a red flag.
Candidate tipChoose one project from school or work. State the question, the data you used, the methods you applied, and what you learned, including what you would do differently.
Question 11: What would you include in an atmospheric research archive so another scientist could reproduce your results?
Interviewer tipA useful archive preserves data sources, processing code, model settings, and versions needed to rerun the analysis. Saving only the final plots leaves the research impossible to check.
Candidate tipWalk through what another scientist would need to trace your atmospheric data from source to result. Include processing choices and instructions for rerunning the work.
Question 12: Walk me through a time you used real data to test a forecasting rule of thumb or idea.
Interviewer tipListen for their own test of the forecasting idea, data that could challenge it, and a result they learned from. Ignoring cases that contradict the rule is a red flag.
Candidate tipPick one forecasting idea you tested. State the problem, explain your data and method, and describe what the results taught you about using the idea in forecasts.
Question 13: Walk me through a time you fixed a meteorological data collection program after its input format changed.
Interviewer tipThe example should show how they traced the format change, checked parsed values, and confirmed collection worked again. Silently dropping unreadable weather observations is a red flag.
Candidate tipUse one real program from work or school. Describe the changed input, your own debugging and validation, and the result; finish with a check you added to catch future format changes.
Question 14: Describe how you improved your forecasts by using a new data source or tool, such as a radar or satellite product.
Example answerThe interviewer wants to learn how you evaluate new forecast tools and turn useful information into better forecasts.
Build your answer using Situation, Task, Action, Result. Briefly describe the forecast problem and what you needed to improve. Spend most of the answer on your own work: learning the product, checking its limits, comparing it with observations, and deciding how to use it. Finish with the practical result and a lesson you would apply again.
For example: "I started using a satellite product to help track low clouds overnight. I needed a clearer picture between surface observation sites. I read the product guidance and compared its cloud signals with surface reports over several nights. Some cloud signals did not mean poor visibility at the ground, so I kept checking surface observations before changing visibility forecasts. The product helped me focus those checks and explain where cloud cover was spreading. I learned to treat it as another source of evidence rather than a replacement for observations."
Avoid listing tools without explaining their value, assuming newer data must be better, or claiming forecast improvements you cannot support.
Interviewer tipA strong example explains their own checks of the new forecast data, a practical improvement, and a lesson learned. Treating a new radar or satellite product as accurate without checking it is a red flag.
Candidate tipUse a real case involving a new forecast tool or data source. Explain how you learned and checked it, what you changed in your forecasts, the result, and what you learned.
Question 15: Describe a time you revised a weather graphic because viewers were drawing the wrong conclusion from it.
Interviewer tipListen for the specific misunderstanding, their own graphic changes, and evidence viewers understood the revision. Making the map more attractive without fixing its misleading message misses the problem.
Candidate tipPick one weather map or graphic you changed. Describe what viewers misunderstood, the labels, colors, or layout you revised, and how you checked that the new version conveyed the forecast correctly.
Question 16: What experience do you have using computer graphics software to prepare weather maps and reports for analysis, distribution or broadcast?
Example answerThe interviewer wants to know which tools you can use on day one and whether your maps help people understand the weather. Describe the kinds of systems you have used, one product you made, and how you kept it accurate and clear.
Sample answer: "In school I used GIS software and simple plotting scripts to make surface analysis and radar maps for our weekly weather discussion. During an internship I learned the station's broadcast graphics system and built the seven-day forecast and severe weather maps for the evening show. I always checked that each map matched the latest forecast and warnings, used colors that viewers with color blindness could tell apart, and kept labels short so people could read them in a few seconds. When a producer said one rainfall map was confusing, I simplified the legend, and that became the version we used for the rest of the season."
Pitfalls to avoid: listing software without saying what you made with it; focusing on looks over accuracy; claiming expertise in a system you have only watched others use.
Interviewer tipLook for the kinds of systems they have used, such as GIS or broadcast graphics tools, and how they keep maps accurate and readable; a vague 'some experience' is a red flag.
Candidate tipDescribe the systems you have used and one product you made with them. Say who it was for and how you made sure the map was accurate and easy to read.
Question 17: Tell me about a time you revised a conclusion in an atmospheric science report after a colleague questioned the evidence.
Interviewer tipA strong case traces the colleague's concern to the underlying atmospheric evidence and a defensible revision. Keeping an unsupported claim to avoid rewriting the report is a red flag.
Candidate tipExplain the original conclusion and the concern raised. Focus on the evidence you rechecked, the wording or analysis you changed, and what the review taught you about reporting scientific limits.
Question 18: What checks would you make before using a reanalysis data set to study a regional climate pattern?
Interviewer tipExpect checks of resolution, observing-system changes, and agreement with independent observations for the region and period. Treating reanalysis as error-free measurements is a red flag.
Candidate tipExplain how you would judge whether the reanalysis represents the climate feature you want to study. Discuss spatial detail, time coverage, and comparisons that could reveal bias or artificial shifts.
Question 19: Recall a time you found a break in a long-term temperature or precipitation record that could distort a climate trend.
Interviewer tipListen for how they distinguished a record change from a climate signal and checked its effect on the trend. Removing inconvenient observations without evidence is a red flag.
Candidate tipSet out the break you found, the station history or nearby records you checked, and your own treatment of the data. End with the effect on the trend and any uncertainty that remained.
Question 20: Walk me through how you collect and analyze historical climate information such as precipitation and temperature records to help predict future weather and climate trends.
Question 21: Share an example of how you helped another office interpret the climate baseline used in a weather outlook.
Interviewer tipListen for their own explanation of the reference period and what the outlook's departures mean, plus the result for the other office. Treating departures from different baselines as directly comparable is a red flag.
Candidate tipName the outlook and the other office's question about the baseline. Explain how you clarified the reference period and departures from it, then describe how the office used your explanation.
Question 22: Tell me about a time you helped a public audience understand the difference between a weather event and a climate trend.
Interviewer tipListen for an explanation suited to the audience, a useful local example, and a sign the distinction became clearer. Dismissing the audience's question instead of addressing it is a red flag.
Candidate tipChoose a real public talk or question session. Describe the confusion, the example you used to distinguish short-term weather from climate, and the audience response that showed whether it helped.
Question 23: Tell me how you handled a client, emergency manager or coworker who strongly disagreed with your forecast.
Interviewer tipListen for respectful discussion of the forecast evidence and uncertainty, a clear outcome, and a lesson learned. Changing a forecast just to stop an argument is a red flag.
Candidate tipChoose one real disagreement over a forecast. Explain how you listened and addressed the person's concerns, then give the outcome and what you learned about handling disagreement.
Question 24: Give an example of how you adjusted training on a weather topic after learners struggled to apply it.
Interviewer tipLook for a specific learner difficulty, a change they made to the weather lesson, and a check of improved application. Repeating the same explanation without checking understanding is a warning sign.
Candidate tipChoose one weather topic you taught at work, school, or as a volunteer. Show what learners struggled with, how you changed the practice or explanation, and what they could do afterward.
Question 25: What would you do if a proposed air quality plan assumed that high ground-level ozone was caused only by hot weather?
Interviewer tipThey should check ozone precursors, sunlight, and pollutant transport as well as temperature before advising on the plan. Endorsing a control measure from temperature alone is a red flag.
Candidate tipSay how you would check the plan's weather assumptions against emissions and air quality observations. Explain how your meteorological findings would inform the plan without claiming heat alone determines ozone.
Question 26: Describe an experience when you applied meteorological knowledge to problems in areas including agriculture, pollution control, and water management, and to issues such as global warming or ozone depletion.
Question 27: Tell me about how you research and analyze the impact of industrial projects and pollution on climate, air quality, and weather phenomena.
Question 28: What have you found to be the best way to estimate or predict the effects of global warming over time for specific geographic regions?
Question 29: Walk me through how you conduct numerical simulations of climate conditions to understand and predict global or regional weather patterns.
Question 30: Walk me through how you launch a weather balloon and check the wind, temperature and humidity data it sends back.
Interviewer tipA strong answer covers pre-launch checks, launch timing and quality control of the sounding data; not knowing how to spot a bad sensor reading is a red flag.
Candidate tipGo through the steps you actually follow, from preparing the radiosonde to reviewing the profile. Mention a time you caught a problem with the data.