Assistant Professor of Physics Interview Questions
For college physics instructors in teaching or combined teaching and research roles. Interviews focus on giving lectures on matter and energy, mentoring students and publishing research.
30 questions, ranked by what the job needs most
Print the top 10:Scoring sheetPractice sheet
Question 1: Walk me through how you improved a physics lecture after an earlier attempt left students confused.
Example answerThe interviewer wants to learn how you recognize an ineffective physics lecture and use that experience to improve your teaching.
Build your answer around Situation, Task, Action, and Result. Briefly name the topic and the evidence that students were confused. Explain what you needed them to understand, spend most of the answer on the changes you made, and finish with evidence from the next class and a lesson you learned.
For example: "In a lecture on Gauss's law, students could repeat the equation but struggled to choose a useful Gaussian surface. I needed to make the role of symmetry clearer. The next time I taught it, I compared cases with different symmetry and asked students to justify their surface choices before calculating. Their written explanations showed a clearer connection between symmetry and the calculation. I learned to check the reasoning before moving to the algebra."
Avoid blaming students, describing changes without checking their effect, or treating a quiet room as proof of understanding.
Interviewer tipListen for a specific change to the physics lecture, evidence students understood more, and a lesson for future classes. Blaming students for confusion without examining the lecture is a red flag.
Candidate tipChoose a real physics lecture that fell short. Explain the signs of confusion, your changes, the result in the next class, and what you learned about teaching that topic.
Question 2: How do you assign partial credit when a student's physics solution has sound reasoning but an incorrect final answer?
Interviewer tipListen for separating physics reasoning from algebra or arithmetic errors and applying the same criteria across papers. Awarding credit solely for the final number misses what the solution shows.
Candidate tipWalk through a sample physics solution. Explain how you weigh the setup, reasoning, and calculation, then describe how you keep partial credit consistent across students.
Question 3: Describe a time you revised a physics homework problem because students could get the right answer without understanding the physics.
Interviewer tipA useful example shows the flaw in the homework problem, the candidate's revision, and evidence of students' reasoning afterward. A correct final answer alone does not show the revision worked.
Candidate tipChoose one physics homework problem. Explain how it let students bypass the reasoning, what you changed, and what their later solutions showed. End with a lesson for writing future assignments.
Question 4: Describe a time you decided what to cut from a physics course that had more content than students could learn well.
Interviewer tipA strong example ties the content choices to course goals and later physics coursework, with evidence of the effect on learning. Cutting required foundations just because they are difficult is a concern.
Candidate tipName the crowded physics course and the learning goals that mattered most. Explain your own choices about content, the effect on students, and what you learned about setting a realistic scope.
Question 5: Describe a time you helped students in your physics course catch up on missing calculus or vector skills.
Example answerThe interviewer wants to learn how you identify gaps in students' math preparation and provide support that helps them learn physics.
Build your example with Situation, Task, Action, and Result. Name the calculus or vector skill students lacked and the work that revealed the gap. Explain your teaching response and how you checked its effect. End with a lesson about recognizing or addressing similar gaps.
For example: "In an introductory mechanics course, homework showed that students were treating force magnitudes as horizontal components. I needed them to resolve vectors before applying Newton's laws. I used a short exercise to locate the confusion, then worked through force diagrams with students labeling axes and components before writing equations. I added brief practice problems and checked their later solutions. Students began showing component calculations correctly, though some still needed help with signs. I learned to check that background skill before assigning more complex force problems."
Avoid assuming weak preparation means students cannot learn physics, describing support without evidence of its effect, or claiming every student caught up.
Interviewer tipListen for evidence of the calculus or vector gap, teaching aimed at it, and a check of later physics work. Assuming struggling students cannot learn physics is a red flag; ask which errors persisted.
Candidate tipUse student work that revealed a calculus or vector gap. Describe the teaching support you provided and compare students' physics solutions before and after that support.
Question 6: Tell me about a time you used students' conflicting predictions to start a productive physics class discussion.
Interviewer tipListen for how the candidate drew out students' physics reasoning and helped the class test competing predictions. Dismissing a wrong prediction without exploring its reasoning misses the discussion's value.
Candidate tipRecall one disagreement over a physics prediction. Describe your prompts and how you involved students in comparing explanations. End with what the discussion revealed and what you learned as its moderator.
Question 7: Walk me through a time you managed physics office hours when several students needed help at once.
Interviewer tipListen for how the candidate divided attention and helped students make progress on their physics problems. Letting one student take the entire session while others receive no help is a concern.
Candidate tipSet up one busy physics office hour. Focus on how you handled the waiting students and their different questions, then explain the result and what you would adjust next time.
Question 8: What would you do if a student bypassed a safety precaution during a physics lab to finish an experiment faster?
Interviewer tipStopping the unsafe activity and making the lab setup safe should come before finishing the experiment. Letting the student continue to save time is a red flag.
Candidate tipSay how you would stop the unsafe work and address any immediate hazard. Then explain how you would review the precaution with the student before allowing the physics experiment to resume safely.
Question 9: Walk me through a physics research project you worked on, from the question you set out to answer to how you shared the results.
Example answerThe interviewer wants to understand your contribution to physics research and how you explain and share its findings.
Use Situation, Task, Action, Result. State the research question, your responsibility, the method and its limits, and the current status of the work. Separate your contribution from the team's and explain technical terms for a broader faculty audience.
Sample answer: "I worked with a research group studying electrical transport in thin films at low temperatures. My part was to test whether contact resistance was affecting the measurements before we interpreted the temperature dependence. I compared measurements using different contact configurations, checked repeatability across cooling cycles, and documented the calibration and uncertainty. I prepared plots and a methods report for our group meeting. The discussion identified additional control measurements we needed. I added those to the experiment plan; the work was still in progress and had not been submitted for publication."
Avoid burying the research question in jargon, claiming the whole group's work as your own, or presenting a tentative interpretation as an established discovery.
Interviewer tipA strong answer explains the physics clearly to a non-specialist and names their own part in the work; vague claims about a large group's results are a red flag.
Candidate tipChoose one project, explain the question in plain terms, say what you did yourself, and end with where it was published or presented and what came of it.
Question 10: What would you do if an undergraduate's physics research results looked promising but their lab notebook did not show how they obtained them?
Interviewer tipExpect a review of the notebook with the student and a way to verify the work before relying on it. Treating undocumented physics results as established findings is a red flag.
Candidate tipExplain how you would discuss the missing lab notes with the student, check what can be verified, and guide them toward research records that let someone trace the results.
Question 11: Describe a time a result in your physics research did not hold up when you checked it.
Interviewer tipListen for the candidate's own checks, an honest account of the failed result, and how the research changed. Hiding checks that undermine the finding is a red flag.
Candidate tipChoose one physics result that failed a later check. Explain the evidence that changed your view, your next steps, and what the experience taught you about testing findings before sharing them.
Question 12: Give an example of how you evaluated a physics preprint's claim that an experimental result challenged an accepted model.
Interviewer tipListen for their own checks of measurement uncertainty, possible systematic errors, and independent evidence before using the claim. Treating a preprint's headline as an established result is a red flag; ask what they learned.
Candidate tipPick a preprint you read about an experimental result that challenged a model. Describe the evidence you checked, your conclusion about the claim, and how it affected your teaching or research.
Question 13: Share an example of helping a graduate student or physics teaching assistant build their skills through mentoring.
Example answerThe interviewer wants to learn how your mentoring helps a graduate student or physics teaching assistant develop skills they can use independently.
Use Situation, Task, Action, and Result to organize one real example. Identify the learner's starting point and the skill they needed to build. Focus on your own mentoring actions, then describe observable progress and what you learned. Separate your contribution from the learner's effort.
For example: "A new physics teaching assistant struggled to explain measurement uncertainty during lab sections. My goal was to help them guide students through the reasoning. We rehearsed a short explanation using sample measurements, and I gave feedback on places where the explanation became unclear. After observing a later section, I saw them help students explain the spread in their measurements without taking over the discussion. I learned that practice with specific feedback helped more than giving broad advice."
Avoid claiming the learner's achievements as your own, listing meetings without showing progress, or presenting a hypothetical mentoring plan instead of a real example.
Interviewer tipA strong example connects the student's or teaching assistant's starting skills to the candidate's mentoring and later progress. Taking credit for the learner's work is a red flag; ask what the mentor learned.
Candidate tipUse one graduate student or physics teaching assistant you mentored. Describe their starting point, your feedback or practice sessions, signs of growth, and a lesson you took from mentoring them.
Question 14: Give an example of improving student learning by introducing a new tool, such as a simulation or in-class response system, into a physics course.
Example answerThe interviewer wants to learn how you choose and use a new teaching tool to address a specific physics learning need.
Structure your answer with Situation, Task, Action, and Result. Identify the topic and the difficulty students faced. Explain why you selected the tool, your role in introducing it, and the student work you used to assess its effect. Finish with what you learned or would change.
For example: "In an introductory circuits course, students confused the effects of changing resistance and changing voltage. I introduced a circuit simulation so they could vary one quantity at a time. Before each change, I asked them to predict the current and explain their reasoning. We compared their predictions with the simulation, then used a written circuit problem to check understanding. Their explanations more often distinguished the two changes. I learned to make predictions part of the activity instead of letting students explore without a clear purpose."
Avoid treating student enjoyment as proof of learning, naming a tool without explaining its use, or claiming an improvement without evidence.
Interviewer tipThe example should link the tool to a physics learning need and evidence in student work. Student enjoyment alone does not establish learning; ask what their written explanations showed.
Candidate tipName the physics topic and the new tool you introduced. Explain the learning difficulty, how you used the tool, and the student work that showed its effect.
Question 15: Before submitting physics lab grades, how do you reconcile the gradebook with marked reports, practical scores, and syllabus weights?
Interviewer tipExpect checks against graded lab reports and practicals, syllabus weights, and final totals. Treating a blank lab score as zero without checking for submitted work is a red flag.
Candidate tipTrace lab report and practical scores from the graded work into the gradebook. Explain how you check missing entries, category weights, and the final calculation before submitting grades.
Question 16: What would you do if students reported that a physics exam you were about to give had been shared outside the class?
Interviewer tipThe first steps should protect exam fairness and check the report through the college's exam procedures. Giving the unchanged exam despite a confirmed leak is a red flag.
Candidate tipStart with how you would check the report and protect students' equal chance on the physics exam. Describe how you would arrange a fair assessment without accusing students before checking the facts.
Question 17: Tell me how you handled a student who strongly disputed a grade on a physics exam or lab report.
Example answerThe interviewer wants to learn how you handle a tense grading dispute while giving a physics student's work a fair review.
Use Situation, Task, Action, and Result. Briefly explain the student's concern and your responsibility in resolving it. Describe your own response, the review of the exam or lab report against grading criteria, and the explanation you gave. End with the outcome and what you learned from the exchange.
For example: "A student strongly challenged a deduction on a physics lab report, saying I had overlooked their explanation of uncertainty. I let them explain the concern, then reread the report against the rubric. I found the explanation in a later paragraph that I had missed. I corrected the score and explained which criteria it met and which deductions still applied. The student accepted the explanation. I learned to review the full report before defending a grading decision."
Avoid changing a grade just to stop an argument, dismissing a student for questioning you, or assuming a fair review must always confirm the original grade.
Interviewer tipA strong example shows a calm review of the physics work against grading criteria. Changing a grade just to end the argument is a red flag; ask how they explained the disputed deduction.
Candidate tipRecall one real grade dispute over a physics exam or lab report. Describe how you heard the student's concern, reviewed the work against the rubric, and explained the final grade.
Question 18: Tell me about a time you had to tell a student they were at risk of failing your physics course.
Example answerThe interviewer wants to know whether you raise hard news with students early, clearly and kindly. Use Situation, Task, Action, Result: when you noticed, how you raised it, the options you offered, and what happened. Sample answer: "In an introductory physics course, a student had missed several homework sets and scored low on the first two exams. Well before the withdrawal deadline, I emailed to ask them to meet during office hours. I showed them their grades, explained plainly that they were on track to fail, and laid out options: tutoring at the learning center, weekly office hours with me, or withdrawing and retaking the course later. They chose to stay and came most weeks. They passed, and they told me later the early warning made the difference." Pitfalls to avoid: waiting until final grades, softening the message so much that the student misses it, and sharing details that could identify the student.
Interviewer tipA strong answer shows they raised it early and privately, with clear facts and options such as tutoring or office hours; waiting until final grades is a red flag.
Candidate tipExplain when and how you raised it, what options you laid out, and how the student responded. Keep details that could identify the student out of your answer.
Question 19: How do you plan and prioritize your week when you are teaching, grading, and keeping a research project moving?
Example answerThe interviewer wants to see how you keep teaching, grading and research all moving without one swallowing the others. Describe your system, then give a real example of a busy week. Sample answer: "I plan each week on Sunday. Lectures and office hours are fixed, so I block those first. I set aside two mornings for research, because writing and data analysis need long stretches, and I protect them like class time. I grade in shorter blocks and aim to return work within a week so students can learn from it before the next assignment. When a grant deadline landed in the same week as midterms, I wrote the exam early, gave the teaching assistant a clear rubric for the first pass of grading, and moved one research morning to the weekend. Both got done on time." Pitfalls to avoid: saying you just work harder, leaving research out when the role includes it, and describing a system you don't actually use.
Interviewer tipListen for a concrete system, such as protected research time and a set grading turnaround, and how they handle a crunch week; letting grading slip for weeks is a red flag.
Candidate tipDescribe a typical week, how you block time for teaching, grading, office hours and research, and what you do when deadlines collide.
Question 20: Share an example of advising a physics student whose career interests differed from your own area of expertise.
Interviewer tipLook for how the candidate learned about the student's goals and connected them with informed guidance. Steering the student toward the adviser's specialty solely because it is familiar is a red flag.
Candidate tipUse one physics student's career question. Explain how you handled the limits of your expertise, helped them find useful advice, and followed up. End with what you learned about advising beyond your specialty.
Question 21: Talk about a time you worked with colleagues to resolve competing demands for shared physics lab equipment.
Interviewer tipThe example should show the candidate's part in agreeing on equipment access and the result for teaching or research. Taking reserved equipment without speaking to affected colleagues is a red flag.
Candidate tipDescribe the competing needs for one piece of physics lab equipment. Focus on your discussions with colleagues, the arrangement you reached, and what you learned about sharing limited equipment.
Question 22: Walk me through a time you balanced measurement precision against the number of student lab stations when buying physics equipment on a limited budget.
Interviewer tipA strong case weighs the precision needed for the experiment against students' access to the equipment and shows the purchase's result. Choosing an instrument too imprecise for the intended measurement is a red flag; ask what they learned.
Candidate tipUse a real purchase where the budget limited precision or the number of lab setups. Explain the measurements students needed to make, the options you compared, your choice, and how it worked in class.
Question 23: Provide an effective method you have used to maintain laboratory equipment.
Question 24: Describe a time you resolved a scheduling conflict involving physics courses, instructors, or lab rooms.
Interviewer tipListen for how the candidate checked the conflicting needs, arranged a workable schedule, and confirmed the outcome. Moving a physics lab into a room without the needed facilities is a red flag.
Candidate tipPick one scheduling conflict from a physics department. Explain the constraints, the people you consulted, your role in resolving it, and what you learned for the next scheduling cycle.
Question 25: What do you check when helping a student register for a physics course with prerequisites?
Interviewer tipExpect checks of completed or equivalent coursework and the college's prerequisite or exception rules. Enrolling a student by simply ignoring a listed prerequisite is a red flag.
Candidate tipWalk through checking the physics course requirements and the student's academic record. Explain how you handle uncertain course equivalencies or an exception request through the college's registration process.
Question 26: Share an example of using evidence from physics teaching to inform an academic committee's decision.
Interviewer tipListen for the teaching evidence the candidate brought, its limits, and its effect on the committee's decision. Presenting one class's experience as proof about all students is a red flag.
Candidate tipIdentify the committee's decision and the physics teaching evidence you contributed. Explain your role in discussing its strengths and limits, the outcome, and what you learned about committee work.
Question 27: Share an effective method you have used to evaluate and grade students' work.
Question 28: What factors do you consider when preparing course materials?
Example answerThe interviewer wants to understand how you plan a course so the materials serve the learning goals and the students who enroll.
Name the main factors you weigh and show how they shape your choices. Common ones are the learning goals, students' starting level, accessibility, cost to students, how current the content is, and how you will assess learning. A short example helps.
Sample answer: "I start with what students should be able to do by the end of the course, then pick materials that build toward it. I think about who usually enrolls, so an introductory section gets more worked examples. I check that materials are accessible, such as captioned videos and readable files, and I try to keep costs down with library or open resources. Last year I replaced an expensive textbook with open readings and short weekly practice sets, and students said the practice helped them most."
Pitfalls: Don't list factors without an example. Avoid ignoring accessibility or cost. Don't describe reusing old materials without reviewing them.
Question 29: Describe an examination you administered which was effective. How about one which was not as effective?
Example answerThe interviewer wants to see that you design fair assessments and learn from the ones that don't work.
Describe both exams briefly. For the effective one, say what it measured and why it worked. For the less effective one, say what went wrong, how you found out, and what you changed. Honesty about the second example matters most.
Sample answer: "One effective exam asked students to solve a problem they hadn't seen before, using the methods from the unit. The results matched what I saw in class, and the mistakes showed me exactly what to reteach. A less effective exam relied on too many recall questions. Most students did well, but later assignments showed many of them couldn't apply the ideas. I rebuilt it with fewer recall items and more short applied problems, and the next term's results lined up better with students' other work."
Pitfalls: Don't claim every exam you wrote worked. Avoid blaming students for a weak exam. Don't skip what you changed.
Question 30: Describe how you plan, evaluate, and revise curricula, course content, materials, and/or methods of instruction. Share an experience.
New to interviews? Start with the common questions every interview asks →