Optical Manager Interview Questions
For opticians who fit glasses for customers. Interviews focus on taking fitting measurements, adjusting frames and checking finished lenses against the prescription.
30 questions, ranked by what the job needs most
Print the top 10:Scoring sheetPractice sheet
Question 1: Walk me through how you measured a customer for new lenses after they chose a frame.
Interviewer tipListen for measurements taken with the chosen frame sitting as the customer will wear it. Using measurements from a frame that was sitting crooked is a red flag.
Candidate tipStart with how the chosen frame sat on the customer's face. Explain how you measured where their pupils lined up with the frame and how you checked your measurements before sending them to the lab.
Question 2: Describe a time you checked a finished pair of lenses against the lab order before handing the glasses to a customer.
Interviewer tipA strong answer ties the decision to dispense the glasses to specific checks against the lab order. Handing over glasses with an unexplained mismatch is a red flag.
Candidate tipName the lens measurements you compared with the order, such as lens power, which is the strength of the lens. Explain what told you the glasses were ready or needed to go back.
Question 3: Tell me about a time you used a customer's prescription and daily activities to recommend lenses.
Interviewer tipListen for a clear link between the written prescription, the viewing distance that mattered to the customer, and the lens choice. Changing the prescribed strength on their own is a red flag.
Candidate tipChoose a case where the customer needed to see clearly at a particular distance, such as at a computer. Explain how the written prescription and that need shaped your recommendation.
Question 4: How have you adjusted eyeglasses that kept sliding down a customer's nose?
Interviewer tipA good answer explains where the fit was loose and how the candidate checked comfort and stability after the adjustment. A frame that stays put because it pinches still needs work.
Candidate tipStart with where the frame sat on the nose and behind the ears. Describe the adjustment you made and how you checked that the glasses stayed put without pinching.
Question 5: How do you check that a frame a customer likes fits their face and works with their prescription?
Interviewer tipA sound check covers bridge and temple fit, eye position in the frame and lens size for the prescription. Choosing by appearance alone can leave the customer with glasses that fit poorly.
Candidate tipWalk through your checks while the customer tries on the frame. Connect its bridge, temple length and eye size to comfort and the lenses that will go into it.
Question 6: Share an example of how you helped a customer choose between lens options when their budget was limited.
Interviewer tipListen for the customer's visual needs, an honest comparison of lens benefits and costs, and the final choice. Calling an optional coating medically required to make a sale is a red flag.
Candidate tipChoose one real lens recommendation with a budget limit. Explain the options you compared, the trade-off you helped the customer understand and the outcome. Include what you learned.
Question 7: Describe a time you helped a new contact lens wearer who struggled to insert or remove their lenses.
Interviewer tipThe example should show patient instruction, clean handling and the customer's own practice. Rushing a wearer out without checking they can remove the lenses safely is a red flag; ask what the optician learned.
Candidate tipUse one real teaching session. Describe the step the wearer struggled with, how you changed your instruction and what they could do by the end. Say what you would carry into the next session.
Question 8: Give an example of how you wrote a lab order for a customer's new glasses.
Interviewer tipThe lab should be able to make the lenses and mount them in the selected frame from the instructions the candidate describes. A required fitting measurement left blank is a red flag.
Candidate tipPick one order and describe how you entered the prescription, identified the frame, and recorded the fitting measurements. Mention a detail you double-checked before sending it.
Question 9: How have you used a lensometer to read the prescription in a customer's current glasses?
Interviewer tipA strong answer explains how the candidate lined up each lens, got a stable reading, and recorded it for the correct eye. Treating an inconsistent reading as final is a red flag.
Candidate tipA lensometer measures the strength of eyeglass lenses. Describe how you positioned each lens to get a steady reading and how you kept the right and left readings straight.
Question 10: What do you check before using a glasses prescription sent by a customer's previous eye doctor's office?
Interviewer tipExpect checks of the customer's identity, the prescription's date and completeness, and confirmation of unclear entries with the prescriber. Guessing a missing lens value is a red flag.
Candidate tipDescribe how you match the prescription to the customer and check that it is complete and usable under your state's rules. Explain when you would contact the prescribing office before placing the order.
Question 11: Tell me about a time you caught a mistake in a measurement, prescription or lab order before the glasses reached the customer.
Example answerThe interviewer wants to learn whether careful checking is part of how you work every day, not something you do now and then. Use Situation, Task, Action, Result. Sample answer: "At the end of a busy day I was entering a lab order, and as I always do, I read it back against the written prescription before sending it. I noticed I had typed the axis on the right lens as 108 when the prescription said 180. I corrected it, then re-checked the rest of the order and the measurements on the ticket. Since then, I read each number aloud as I check it, and I ask a coworker to look over any order I can't finish in one sitting. Catching it then spared the customer a wait for a remake and spared the shop the cost of a second pair." Pitfalls: claiming you never make mistakes; taking credit for an error someone else caught; leaving out the habit that helps you catch errors.
Interviewer tipListen for a habit of double-checking, such as re-measuring or reading the order back, rather than luck; a candidate who says they never make mistakes is a red flag.
Candidate tipDescribe the mistake, how you spotted it, and how you corrected it. Mention the check you now use so it doesn't happen again.
Question 12: Tell me about a time you had to tell a customer that the frame or lenses they wanted wouldn't work well with their prescription.
Example answerThe interviewer wants to see that you can give unwelcome news honestly and kindly, and still help the customer leave with something they like. Use Situation, Task, Action, Result. Sample answer: "A customer with a strong nearsighted prescription loved a large, thin metal frame. I knew the lens edges would be thick and heavy at the outer edge of that frame. While they tried it on, I used a sample lens to show how thick the edges would look and explained that the glasses might slide down their nose. I didn't tell them they couldn't have it. I showed two frames with a similar style but a smaller eye size, and explained how a high-index lens would make the edges thinner, along with the extra cost. They picked one of the smaller frames and were happy with how thin the lenses looked." Pitfalls: saying no without a reason; using technical terms the customer doesn't follow; letting them buy a poor fit to avoid an awkward conversation.
Interviewer tipListen for a clear, honest reason in plain words and a good alternative offered; letting the customer buy a poor choice to close the sale is a red flag.
Candidate tipSay what the customer wanted and why it wouldn't work, such as a strong prescription in a very large frame. Explain how you told them and what you offered instead.
Question 13: Tell me about a time careful listening helped you understand what a customer really needed from their glasses.
Interviewer tipListen for open questions, letting the customer finish, and repeating back what they heard; jumping to a product before the customer explains is a red flag.
Candidate tipDescribe what the customer first said, the questions you asked, and what you learned that they hadn't said at first. Say how it changed your recommendation.
Question 14: Tell me how you handled a customer who was upset because their new glasses felt wrong or made it hard to see.
Example answerThe interviewer wants to learn how you respond to an upset customer while taking a complaint about new glasses seriously.
Build your answer using Situation, Task, Action, Result. Briefly describe the customer's complaint and your responsibility. Spend most of the answer on your own actions: listening, checking the glasses and explaining the next step. End with the outcome and a lesson you used afterward.
For example: "A customer came back frustrated because their new glasses kept slipping and their vision felt off. I let them explain without interrupting, then checked the frame fit and lens measurements. The frame was sitting too low. I adjusted it and had the customer try the glasses again. They said the view was clearer and the glasses felt more secure. I explained that they should return if the problem continued. That visit taught me to check the fit carefully before assuming someone just needs time to adjust."
Avoid blaming the customer, dismissing blurred vision as normal without checking, or describing only what your coworkers did.
Interviewer tipListen for calm listening, checks of the glasses and a clear outcome for the customer. Blaming the customer before checking their complaint is a red flag; ask what the candidate learned.
Candidate tipUse one real customer complaint about new glasses. Describe how you listened, checked the glasses and helped the customer, then give the result and what you learned.
Question 15: Walk me through how you chose a fix for a customer who couldn't adapt to new lenses.
Interviewer tipLook for a real case linking checks of the lenses, measurements and frame fit to the chosen fix and its result. Guessing at a remake without checking the cause is a red flag; ask what the case taught them.
Candidate tipPick one customer who struggled with new lenses. Explain the checks you made, the causes you ruled out and the evidence behind your fix, then give the customer's result and what you learned.
Question 16: Tell me about a time you resolved a customer's confusion about the price of their glasses before completing the sale.
Interviewer tipA strong example identifies the source of confusion, explains the frame and lens charges and confirms the agreed total. Hiding an extra charge until payment is a red flag.
Candidate tipSet up one real sale where the customer misunderstood the price. Focus on how you checked the charges and explained the total, then give the outcome and a lesson for future sales.
Question 17: Walk me through a time you handled a frame or lens that became unavailable after a customer placed an order.
Interviewer tipListen for checking availability with the supplier, realistic alternatives and the customer's agreement to any change. Substituting a different frame or lens without telling the customer is a red flag.
Candidate tipPick one real supply problem. Explain what you confirmed with the supplier, how you handled the customer's choice and what happened to the order. Finish with what you learned about ordering.
Question 18: Provide an effective method you have used to instruct clients on how to wear and care for eyeglasses.
Question 19: What would you do if a customer's cracked eyeglass frame could no longer hold a lens securely but they asked you to patch it?
Interviewer tipThe lens must remain secure. Expect an honest explanation of the damage and safe repair or replacement options; returning an insecure lens as a completed repair is a red flag.
Candidate tipStart with the risk from the damaged frame. Explain how you would assess a lasting repair and discuss alternatives with the customer if the frame cannot safely hold the lens.
Question 20: What is the state of your records? Name one thing you would like to improve.
Question 21: Share an experience in which you fabricated lenses to meet prescription specifications.
Question 22: Tell me about your experience assembling eyeglasses.
Question 23: Provide an experience in which you successfully performed administrative duties.
Question 24: Share your experience grinding lens edges and applying coatings to lenses.
Question 25: Share an experience in which you effectively supervised the training of student opticians. What methods made you successful?
Question 26: Share an effective method you have used in arranging displays of merchandise.
Question 27: Tell me about a time you went beyond your usual duties to make sure a customer had glasses they could rely on.
Interviewer tipA strong example shows an extra step on a glasses order or adjustment and follow-through for the customer. Promising an update on a delayed lab order and never providing it is a red flag.
Candidate tipPick a real case, say what was at stake for the customer, what extra step you took, and how it turned out. Keep the focus on the customer, not on praise.
Question 28: Share an example of how using a new measuring device, lens design or ordering system improved your service to customers.
Interviewer tipListen for what they learned about the device, lens design or ordering system and a real customer benefit. Claiming better service without explaining what changed for the customer is a red flag.
Candidate tipChoose a real change involving a measuring device, lens design or ordering system. Explain how you learned to use it, the benefit to a customer and what you learned from the result.
Question 29: What do you do to make sure a customer understands their lens and frame options before they decide?
Interviewer tipListen for plain words instead of optical jargon, checking what the customer heard, and honest pricing; pushing the costliest coating on everyone is a red flag.
Candidate tipDescribe how you explain options in everyday terms, tie each one to how the customer uses their eyes, and check they understood. Give a short example.
Question 30: Provide an example when your ethics were tested.
Example answerThe interviewer wants to know whether you do the right thing when it is inconvenient, and how you handle pressure to cut corners.
Use Situation, Task, Action, Result. Describe the pressure or temptation without naming people, explain the choice you made and why, and how you handled the conversation. Keep the focus on your actions, not on judging others.
Sample answer: "Near the end of a quarter, a coworker asked me to record a sale as complete even though the customer hadn't signed yet, so our numbers would look better. I told them I wasn't comfortable doing that and suggested we tell our manager the deal would close the following week. My manager agreed it should wait. The customer signed early in the new quarter, and our records stayed accurate."
Pitfalls: Don't say your ethics have never been tested. Avoid stories that make you sound self-righteous or that share confidential details. Don't pick an example where you went along with the wrong choice and stop there.