Internet Developer Interview Questions
For network architects who design computer networks within and between sites. Interviews focus on adapting designs to customer needs and choosing network hardware and software.
30 questions, ranked by what the job needs most
Print the top 10:Scoring sheetPractice sheet
Question 1: Walk me through a network design you developed to connect a site to the rest of the company.
Interviewer tipA strong answer explains how the layout served the site and why the candidate placed key connections where they did. A list of equipment with no explanation of how it fits together leaves the design unclear.
Candidate tipPicture the site for the interviewer. Trace the path from the site to the rest of the network, then explain one design choice you made and the constraint behind it.
Question 2: Describe a network security measure you designed to limit which systems could reach an internal service.
Interviewer tipListen for which connections were necessary and how the candidate checked that the limits worked. Giving every system access because a few needed it is a red flag.
Candidate tipName the service and the systems that needed to reach it. Explain your part in the design and how you checked that it allowed those connections and blocked the others.
Question 3: Tell me about a network recovery plan you developed to get a site back online after a major outage.
Interviewer tipLook for an order that reflects what each connection depends on. A plan that calls for restoring a connection before the equipment or links it needs are ready has a gap.
Candidate tipStart with the kind of outage you planned for. Explain which connections you put first, what had to be working before they could come back, and how you checked the plan.
Question 4: Tell me about a fix you designed or put in place for a network issue that kept disconnecting users.
Interviewer tipA strong example links the fix to the repeated drops and shows that users stayed connected in the same conditions. Calling it fixed after one successful reconnect leaves the recurring issue untested.
Candidate tipBriefly describe when users lost their connections. Focus on the change you designed or made and how you checked whether the drops returned under the same conditions.
Question 5: Share an example of how tracking network performance over time changed a decision you made about a link.
Interviewer tipLook for a pattern the candidate could tie to their decision, such as delays that recurred during busy hours. Treating one brief spike as proof of a lasting problem is a red flag.
Candidate tipUse a real example and name the measure you tracked, such as how long traffic took to get through. Describe the pattern you saw and the decision it led to.
Question 6: Tell me about a time a team's requirements shaped your choice of network equipment.
Interviewer tipA strong answer ties the choice to a stated need, such as the number of devices to connect. Choosing equipment that falls short of a requirement without resolving the gap is a red flag.
Candidate tipPick one equipment decision and explain how you turned the team's request into something you could compare across options. Say which requirement drove the choice and how the equipment met it.
Question 7: Give an example of a detail you caught in a network change plan that helped the rollout go smoothly.
Interviewer tipReward a specific cross-check that caught a mistake and made the change easier to carry out. Signing off on conflicting details in the plan and diagram without checking them is a red flag.
Candidate tipPick a specific mismatch, such as a port number that differed between the diagram and the change plan. Explain how you spotted it and what was corrected before the rollout.
Question 8: What would you do if a restore test showed that a network device's configuration backup was incomplete?
Interviewer tipThe answer should protect the working device, investigate the incomplete backup, and verify a replacement copy. Overwriting the live configuration with the incomplete file is a wrong first move.
Candidate tipStart with protecting the device's working configuration. Then explain how you would find the backup problem, obtain a complete copy, and check it with a safe restore test.
Question 9: Describe a time you changed a network design, such as a campus, branch or data center layout, because it no longer met the needs of the people using it.
Example answerThe interviewer wants to see that you redesign based on evidence and can explain the trade-offs you made. Use Situation, Task, Action, Result. Describe the old design and the symptoms users saw, how you measured the problem, what you changed and why, and how you confirmed it helped. Sample answer: At a company with three office floors, staff kept complaining that video calls froze in the afternoon. I pulled interface statistics and found that every floor shared one uplink to the core, which was saturated after lunch. I proposed adding a second uplink per floor and moving voice and video traffic onto its own VLAN with quality of service. I tested the change in a maintenance window and rolled it out one floor at a time. Afterward, complaints about frozen calls stopped and the uplinks had room to spare. Pitfalls to avoid: describing a redesign you only proposed as if it shipped, skipping how you measured the problem, and listing technologies without saying why they fit the users' needs.
Interviewer tipA strong answer starts from evidence of the users' problem, such as slow applications or outages, and explains the design trade-offs; redesigning without measuring first is a red flag.
Candidate tipExplain what was wrong with the old design, how you found out, what you changed in the topology or segmentation, and how you checked that it worked.
Question 10: Describe how you coordinated work on network equipment that needed maintenance, a repair, or an upgrade.
Interviewer tipListen for what showed the work was due and how the candidate agreed on timing with the people affected. Taking a shared device offline for planned work without notifying affected teams is a red flag.
Candidate tipName the equipment and the sign that it needed work. Explain your role in choosing a time, who needed advance notice, and how the work went.
Question 11: Share an experience in which you successfully coordinated installation of new equipment.
Question 12: Provide an experience in which your participation in a network technology upgrade or expansion project benefited your company.
Question 13: Share an experience in which you successfully adjusted a network size to meet volume or capacity demands.
Question 14: How do you determine specific network hardware and software requirements?
Question 15: Describe an effective detailed network specification which you prepared.
Question 16: How do you ensure that customer requirements are met efficiently and effectively?
Question 17: What is the state of your documentation? What is one thing you would like to improve in your documentation?
Question 18: Describe procedures you developed for installation, use, or troubleshooting of communications hardware or software.
Question 19: Provide an experience in which you helped a user solve an operational problem. How did you diagnose the problem?
Question 20: Tell me about a time you used data to compare network design options, such as WAN connection types or routing approaches, and chose the best one.
Example answerThe interviewer wants to see how you make design decisions: what criteria you use and what data supports them. Use Situation, Task, Action, Result. Lay out the options, your criteria, the data you collected and how the choice worked out. Sample answer: We needed to connect twelve branch offices to headquarters, and the existing leased lines were expensive and slow to install. I compared keeping leased lines, moving to broadband with SD-WAN, and a mix of both. I collected traffic baselines from each branch, quotes from carriers, and the uptime needs of the point-of-sale system. Scoring the options on cost, latency, redundancy and setup time showed that broadband with SD-WAN plus a cellular backup met every requirement at lower cost. We piloted it at two branches before rolling it out. New sites came online faster and stayed up through several carrier outages. Pitfalls to avoid: skipping the criteria, relying on vendor claims without your own data, and not saying how the decision held up.
Interviewer tipListen for clear criteria like cost, latency, redundancy and growth, with real data behind the choice; picking the familiar option out of habit is a red flag.
Candidate tipLay out the options, the data you gathered such as traffic baselines or vendor quotes, how you weighed them, and how the choice held up.
Question 21: Tell me about a time your recommendation to leadership on network hardware, services or architecture led to a better outcome for the organization.
Example answerThe interviewer wants to see that you can turn technical analysis into advice leaders can act on. Use Situation, Task, Action, Result. Describe the decision, the options you presented, the evidence behind your recommendation and the outcome. Sample answer: Leadership planned to replace our core switches with the same model line, mainly because the team knew it. I reviewed our traffic growth, the end-of-support dates and the cost of the next three years of support. I presented two options in plain terms: a like-for-like refresh, or a design with fewer, higher-capacity switches and redundant links that cost a little more upfront but less to support. I explained the outage risk of each and recommended the second. They approved it, and during a later hardware failure the redundant links kept the network up with no user impact. Pitfalls to avoid: using jargon leaders could not follow, presenting only one option, and claiming credit for results that depended on others.
Interviewer tipLook for advice backed by data on cost, risk and capacity, explained in business terms; a recommendation that only made sense to engineers is a red flag.
Candidate tipDescribe the decision leadership faced, the options you laid out, why you recommended one, and what happened after they acted on it.
Question 22: Tell me about a time you spotted a coming network problem, such as aging hardware or growing traffic, early enough for your organization to act.
Example answerThe interviewer wants to know whether you watch for problems before they cause outages, and whether you can get the organization to act in time. Use Situation, Task, Action, Result. Explain the warning signs, how you confirmed the problem, how you raised it and what happened. Sample answer: While reviewing monthly utilization reports, I noticed our internet links at headquarters were climbing steadily as more staff used cloud applications. At that rate they would be saturated within a few months. I confirmed the trend with flow data, which showed the growth came from business applications. I wrote a short summary for my manager with the trend, the risk and two upgrade options with costs. The upgrade was approved and installed before our busy season, and users never saw a slowdown. Pitfalls to avoid: describing a problem you noticed only after users complained, leaving out the evidence, and skipping how you got the fix approved.
Interviewer tipStrong answers name the signals they watched, like utilization trends or end-of-support dates, and how they got action approved; waiting for an outage is a red flag.
Candidate tipDescribe what you noticed, how you confirmed it, who you told, and what the organization did before it turned into an outage.
Question 23: Describe a time you solved a business problem by introducing a new networking technology or practice, such as SD-WAN or network automation.
Example answerThe interviewer wants to learn how you applied a new networking technology or practice to meet a real business need.
Use Situation, Task, Action, Result to organize one real example. Briefly explain the business problem and your responsibility. Spend most of the answer on your own decisions, how you checked the change, and how you introduced it. Finish with the effect on the business and a lesson you took forward. Describe results you can support without sharing confidential network details.
For example: "We were opening branch offices, and manual switch configuration kept delaying handoffs. I developed an automation template for the settings the branches shared. I tested it on spare equipment and compared the results with our design before using it at a branch. I kept site-specific settings separate so the template would not overwrite them. The branch setup needed less rework. I learned to check exceptions before expanding automation."
Avoid choosing technology just because it is new, taking credit for teammates' work, or claiming benefits you cannot explain.
Interviewer tipListen for their own role, checks that the network change met the business need, and a result and lesson. Rolling out SD-WAN or automation without checking its effect on network service is a red flag.
Candidate tipChoose one real network change. Explain the business problem, your role in trying and introducing the technology or practice, the result, and what you learned.
Question 24: Share an effective method you have used to determine performance and interoperability of new or modified hardware/software products.
Question 25: Tell me about an equipment configuration prototype you designed and/or built. Name one thing you could have done better.
Question 26: Share an example of how you fixed a network availability report that gave a misleading picture of service.
Interviewer tipListen for the source of the misleading availability figure, their own changes to the reporting procedure, and a check of the result. Removing real outages just to improve the figure is a red flag.
Candidate tipUse a real report whose availability figure needed correction. Explain the mismatch, your changes to the way availability was measured or reported, and how you checked the corrected report.
Question 27: Provide a description of a plan or budget you developed for network equipment replacement.
Question 28: Share an effective communication method you have used to determine customer needs, e.g. communicating with marketing staff.
Question 29: Share an experience in which successful communication with vendors helped you increase your knowledge or solve a problem in your work.
Question 30: Describe an effective method you have used to coordinate network and design activities with designers of associated networks.