Skip to content
Milling and Planing Machine Setters, Operators, and Tenders, Metal and PlasticRanked by what the job needs most

Production Broaching Machine Operator Interview Questions

30 questions

Print the top 10 (PDF)

  1. Question 1: How do you check a finished milled part against the drawing after removing it from the machine?

  2. Question 2: Tell me about a time you adjusted a milling or planing machine during a run to keep parts within tolerance.

  3. Question 3: How do you use a drawing or work order to plan the sequence of operations for a milling job?

  4. Question 4: Describe a time you found a workpiece out of alignment while setting up a milling machine.

  5. Question 5: How do you secure an irregularly shaped workpiece for milling?

  6. Question 6: Walk me through a time you selected and installed a cutter for a milling job.

  7. Question 7: How do you calculate the acceptable size range for a milled feature from the dimension and tolerance on a drawing?

  8. Question 8: Share an example of a difficult milling job where you had to choose the cutting speed, feed rate, and depth of cut.

  9. Question 9: What checks do you make at the milling machine controls before starting the first cut?

  10. Question 10: Describe a time you caught a small detail in a milling drawing or work order before it caused a bad part.

  11. Question 11: Share an example of a change in a milling machine's sound or vibration that alerted you to a problem.

  12. Question 12: Describe a time a pre-run inspection of a milling machine or fixture revealed a problem.

  13. Question 13: What tells you a worn milling cutter can be sharpened rather than replaced?

  14. Question 14: Give an example of how you adjusted the handwheel feed when a milling cut began to chatter.

  15. Question 15: Share an example of a time you corrected coolant or lubricant flow that was not reaching a milling cut properly.

  16. Question 16: Name a time when you mounted attachments and tools such as pantographs, engravers, or routers to perform other operations such as drilling or boring.

  17. Question 17: Tell me about a time you learned to operate a milling or planing machine that was new to you.

  18. Question 18: Describe a time you handled an awkward workpiece while loading or unloading a milling machine.

  19. Question 19: Tell me about a time you took an extra step to leave a milling job ready for the next operator.

  20. Question 20: Give an example of how you applied what you learned about a new cutter or fixture on a milling job.

  21. Question 21: Tell me about a time you resolved a mismatch between the milling parts produced and the production count.

  22. Question 22: Walk me through a time you compared possible causes of a poor surface finish on a milled part.

  23. Question 23: Tell me how you organize, plan, and prioritize your work.

  24. Question 24: Provide an experience that demonstrates your ability to manage time effectively. What were the challenges and results?

  25. Question 25: Provide an example of a time when you were able to demonstrate excellent listening skills. What was the situation and outcome?

  26. Question 26: Provide an example when your ethics were tested.

  27. Question 27: Provide a time when you dealt calmly and effectively with a high-stress situation.

  28. Question 28: Share an experience in which your ability to consider the costs or benefits of a potential action helped you choose the most appropriate action.

  29. Question 29: Describe an experience in which you successfully controlled the operation of a difficult system. What made you successful?

  30. Question 30: Describe a time when you successfully serviced, repaired, or tested a machine or device that operates mainly by mechanical principles.