Skip to content

Line Foreman Interview Questions

For lineworkers who install and repair electric power lines. Interviews focus on working from poles and bucket trucks, checking equipment, and making lines safe for repairs.

30 questions, ranked by what the job needs most

Print the top 10:Scoring sheetPractice sheet

  1. Question 1: Describe a time you kept a pole repair area barricaded while people needed to use a nearby sidewalk.

  2. Question 2: How have you helped isolate or ground a damaged power line so your crew could repair it?

  3. Question 3: Tell me about your experience accessing line equipment by climbing poles or using a bucket truck.

  4. Question 4: Tell me about your experience driving and setting up line trucks, such as bucket trucks or digger derricks, at a job site.

  5. Question 5: How do you go about replacing a damaged switch on an overhead distribution line?

  6. Question 6: How do you use field inspections and test readings to narrow down where a fault is along an overhead power line?

  7. Question 7: Share an example of a time you cleared up confusion about who was doing what on a line crew.

  8. Question 8: What would you do before removing a damaged power pole that still has conductors attached?

  9. Question 9: Tell me about a time it was hard to control tension while pulling wire into place between power poles.

  10. Question 10: Describe a time you caught a problem while fitting crossarms, insulators, or other hardware to a pole before it was set.

  11. Question 11: What kind of experience do you have digging holes, using augers, and setting poles, using cranes and power equipment?

  12. Question 12: Tell me how you identify defective sectionalizing devices, circuit breakers, fuses, voltage regulators, transformers, switches, relays, or wiring, using wiring diagrams and electrical-testing instruments.

  13. Question 13: Share an effective approach to test conductors, according to electrical diagrams and specifications, to identify corresponding conductors and to prevent incorrect connections.

  14. Question 14: Walk me through a time a watt-hour meter installation did not go as planned.

  15. Question 15: Tell me about a time an inspection of a pole, crossarm, insulator or other hardware turned up a problem others had missed.

  16. Question 16: What would you do if urgently needed tools and materials put your line truck over its load limit?

  17. Question 17: Walk me through how yo splice or solder cables together or to overhead transmission lines, customer service lines, or street light lines, using hand tools, epoxies, or specialized equipment.

  18. Question 18: What do you check when applying insulating or fireproofing material over power-line conductors and joints?

  19. Question 19: How do you remove cable sheathing and insulation before a power-cable splice without damaging the conductor?

  20. Question 20: Tell me about a time cable twisted or snagged while you were pulling it by hand from a truck-mounted reel.

  21. Question 21: Give an example of how you handled unexpected resistance while pulling underground power cable through conduit.

  22. Question 22: Share an example of a time ground conditions made it difficult to cut a trench for underground power cable.

  23. Question 23: What would you do if a branch you were assigned to trim was resting on an energized power line?

  24. Question 24: How often is it needed for you to travel in trucks, helicopters, and airplanes to inspect lines for freedom from obstruction and adequacy of insulation?

  25. Question 25: Describe a time you serviced or tested mechanical line equipment, such as a winch or hydraulic tool.

  26. Question 26: Describe how you learned to safely use a new piece of line equipment, such as a new digger derrick, hydraulic tool or testing meter.

  27. Question 27: Share an example of when you went above and beyond the "call of duty".

  28. Question 28: Share an experience in which your attention to detail and thoroughness had an impact on your last company.

  29. Question 29: Provide a time when you dealt calmly and effectively with a high-stress situation.

  30. Question 30: Tell me about a time when you successfully determined the cause of an operating error at your company and solved the problem.