Paleontology Teacher Interview Questions
For college instructors in earth, atmospheric, marine and space sciences. Interviews focus on adapting science lessons to students' needs and publishing research.
30 questions, ranked by what the job needs most
Print the top 10:Scoring sheetPractice sheet
Question 1: How would you grade an earth science lab report whose interpretation is well supported but differs from your answer key?
Interviewer tipA sound answer weighs the observations, reasoning and stated grading criteria rather than agreement with the key alone. Rejecting a supported interpretation only because it differs from the key is a red flag.
Candidate tipExplain the criteria for observations, evidence and reasoning in the lab report. Distinguish a well-supported alternative interpretation from an error, using the lab's stated grading criteria.
Question 2: Walk me through a lecture you prepared or taught that made a hard-to-picture process like plate motion or storm formation clear to students.
Interviewer tipListen for why the diagram or demo helped and what the candidate learned from students' responses. Treating a quiet room as proof that everyone understood is a red flag.
Candidate tipName the idea students had to grasp and the visual, demo or example you used to explain it. Use a student question or a quick check to show what clicked and where the explanation could have been clearer.
Question 3: Share an example of how you supervised students as they took measurements in an Earth or space science lab or in the field.
Interviewer tipA strong example shows how the candidate spotted or prevented bad readings while students were still working. Accepting readings the candidate knew came from a faulty setup is a red flag.
Candidate tipName the measurement students were taking. Describe how you checked their technique while they worked and what your checks caught or helped them do on their own.
Question 4: Describe how you revised an Earth or space science course unit after reviewing students' work.
Interviewer tipListen for a link between a pattern in students' work and the change to the unit. Claims that the revision worked should be backed up by something the candidate saw in students' later work.
Candidate tipShow what a set of lab reports or assignments told you about the unit. Explain what you changed in the materials or the order of activities and what you saw in later work.
Question 5: Walk me through research you conducted in earth, atmospheric, marine or space science, from the research question to publication of the findings.
Example answerThe interviewer wants to understand the research you conducted and your contribution to communicating its findings through publication.
Use Situation, Task, Action, Result: state the research question, your role, the methods and checks, and how the findings reached publication. Make your own contribution clear even if you did not lead the project.
For example: "I contributed to a coastal storm study examining how buoy observations compared with reanalysis estimates during storm passages. My role was preparing the datasets and testing the analysis code. I checked missing observations, time alignment and the sensitivity of results to our stated inclusion rules. I documented uncertainty rather than removing cases simply because they weakened a pattern. I drafted the methods section and figures, then helped revise them in response to peer review. The paper was published with our methods and limitations clearly stated."
Choose a project and publication outcome from your own experience. Avoid presenting the whole lab's work as your own, selecting data to force a result, or calling a submitted paper published.
Interviewer tipListen for a clear research question, sound data and methods, and a real outlet such as a peer-reviewed journal; vague answers with no personal role in the work are a red flag.
Candidate tipPick one project, say what question it answered, what data or fieldwork you used and what your own role was. End with where it was published or presented and what came next.
Question 6: Tell me about a time you discovered a flaw in a map-reading question after students had taken an earth science exam.
Interviewer tipListen for how they checked the map-reading flaw, applied a consistent scoring remedy and improved the exam item. Correcting only the grades of students who complained is a red flag.
Candidate tipIdentify the flaw in the map or question and how you found it. Explain your review of affected answers, the scoring decision and the change you made for future exams. End with the result for students.
Question 7: Describe a time you reduced lecture topics in an earth science course to preserve time for students to collect and interpret field data.
Interviewer tipA strong example ties the reduced lecture coverage to the value of collecting and interpreting field data, with evidence of the result. Removing foundations students needed for that fieldwork is a red flag.
Candidate tipName the course goals and fieldwork you needed to preserve. Explain how you chose which lecture topics to reduce, what students learned from the field data and what you would adjust next time.
Question 8: Share an example of how you moderated a class discussion when students drew conflicting conclusions from the same climate graph.
Interviewer tipListen for how the candidate kept students comparing evidence and brought quieter voices into the discussion. Settling the disagreement by a class vote instead of examining the graph is a red flag.
Candidate tipUse one real discussion. Describe the conflicting readings, your prompts and how students' reasoning changed, then note what you would repeat or change next time.
Question 9: What would you include in an ocean data assignment handout so students can distinguish observations from their interpretations?
Interviewer tipExpect clear directions, a distinction between recorded observations and claims, and criteria for using evidence. A handout that treats an interpretation as a direct measurement is a red flag.
Candidate tipDescribe the directions and prompts you would put in the handout. Show how they help students separate what the ocean data show from the explanations they propose.
Question 10: How do you check that an earth science course's final grades correctly include field notebook scores and lab practical grades?
Interviewer tipExpect checks of original field notebook and lab practical scores, their gradebook entries and syllabus weights. Submitting final grades with unresolved score mismatches is a red flag.
Candidate tipTrace the field notebook and lab practical scores into the gradebook and final calculation. Explain how you check missing entries, grading weights and the grades submitted for each student.
Question 11: How have you used office hours to reach students who were struggling to read geologic maps but were not coming for help?
Interviewer tipSeek a real example connecting geologic map difficulties to changes in office-hours access or outreach, with a result. Assuming students who stayed away did not need help is a red flag.
Candidate tipChoose a real case of students struggling with geologic maps. Explain how you learned what kept them from office hours, changed access or outreach and checked whether they got useful help.
Question 12: Share an example of how you advised an undecided student comparing geology field courses with courses in weather data analysis.
Interviewer tipListen for a comparison of fieldwork and weather data analysis based on the student's interests and course requirements, with a clear outcome. Ignoring prerequisites when recommending courses is a red flag.
Candidate tipKeep the student anonymous. Explain how you explored their interests, compared the field and data-analysis coursework and checked prerequisites. Finish with the student's decision and what you learned.
Question 13: Walk me through a time you checked a surprising claim in earth, atmospheric, marine or space science against other published research.
Interviewer tipThe example should show the candidate comparing methods, evidence and limits across papers, plus what they concluded. Accepting a claim solely because it is the newest paper is a red flag.
Candidate tipName the claim and why it needed checking. Focus on the papers you compared, how you weighed their evidence and the conclusion you reached, including any uncertainty.
Question 14: Give an example of how you found affordable topographic maps or geologic map resources when students could not afford the required course materials.
Interviewer tipA strong example shows their search for affordable map resources and checks that students could complete the required exercises. Choosing maps with unreadable detail just because they are free is a red flag.
Candidate tipDescribe the map materials students needed and the cost barrier. Explain how you compared affordable options for scale, detail and course exercises. End with how the chosen resources worked for students.
Question 15: Talk about a time you worked with a colleague to resolve incompatible sampling methods in an earth or marine science research project.
Interviewer tipExpect the candidate's own contribution to comparing methods and agreeing on usable data, with a clear outcome. Combining incompatible samples without addressing the differences is a red flag.
Candidate tipExplain the mismatch between sampling methods and its effect on the shared research. Focus on how you worked with your colleague, the resolution and what you learned for future projects.
Question 16: Share an experience in which you successfully supervised teaching, internship, and/or research work. What methods made you successful?
Example answerThe interviewer wants to see how you guide teaching assistants, interns, or student researchers so they do good work and grow.
Use Situation, Task, Action, Result. Describe who you supervised and on what, the methods you used (clear expectations, regular check-ins, feedback, and gradually more independence), and what they achieved. Say which method mattered most.
Sample answer: "I supervised two graduate teaching assistants who led weekly lab sections for my course. At the start of the term, I gave them a short guide on grading standards and common student questions, and we met for half an hour each week to go over the next lab. I sat in on one section each month and gave specific feedback afterward. By midterm their grading matched mine closely, and student comments about the sections improved. The weekly meeting mattered most, because problems came up early."
Pitfalls: Don't describe supervision as just handing out tasks. Avoid taking credit for what the students achieved on their own. Don't skip the methods, since the question asks.
Question 17: What would you do if a curriculum committee proposed removing fieldwork from an earth science degree to reduce costs?
Interviewer tipExpect a review of learning goals, costs and alternatives before a recommendation. Endorsing the cut without checking which degree outcomes depend on fieldwork is a red flag.
Candidate tipStart with the information you would bring to the committee about fieldwork's learning goals and costs. Explain how you would compare alternatives before recommending a change.
Question 18: Share an effective technique you have used to evaluate and grade students' work.
Question 19: Describe an examination you administered which was effective. How about one which was not as effective?
Example answerThe interviewer wants to see that you design fair assessments and learn from the ones that don't work.
Describe both exams briefly. For the effective one, say what it measured and why it worked. For the less effective one, say what went wrong, how you found out, and what you changed. Honesty about the second example matters most.
Sample answer: "One effective exam asked students to solve a problem they hadn't seen before, using the methods from the unit. The results matched what I saw in class, and the mistakes showed me exactly what to reteach. A less effective exam relied on too many recall questions. Most students did well, but later assignments showed many of them couldn't apply the ideas. I rebuilt it with fewer recall items and more short applied problems, and the next term's results lined up better with students' other work."
Pitfalls: Don't claim every exam you wrote worked. Avoid blaming students for a weak exam. Don't skip what you changed.
Question 20: What factors do you consider when preparing course materials?
Example answerThe interviewer wants to understand how you plan a course so the materials serve the learning goals and the students who enroll.
Name the main factors you weigh and show how they shape your choices. Common ones are the learning goals, students' starting level, accessibility, cost to students, how current the content is, and how you will assess learning. A short example helps.
Sample answer: "I start with what students should be able to do by the end of the course, then pick materials that build toward it. I think about who usually enrolls, so an introductory section gets more worked examples. I check that materials are accessible, such as captioned videos and readable files, and I try to keep costs down with library or open resources. Last year I replaced an expensive textbook with open readings and short weekly practice sets, and students said the practice helped them most."
Pitfalls: Don't list factors without an example. Avoid ignoring accessibility or cost. Don't describe reusing old materials without reviewing them.
Question 21: Provide an effective method you have used to initiate and facilitate classroom discussions. Share an experience.
Example answerThe interviewer wants a concrete teaching technique for getting students talking and keeping the discussion productive.
Name your method, explain why it works, and give one example from a class you taught. Mention how you include quieter students and keep the conversation on track.
Sample answer: "I often start with a think-pair-share. I pose an open question tied to the reading, give students two minutes to write their own answer, then have them compare with a partner before we open it up to the room. In one class, discussion had been dominated by a few voices. Once I started this routine, I could call on pairs instead of individuals, and many more students spoke up. I close each discussion by summing up the main points and linking them to the next topic."
Pitfalls: Don't describe a lecture with a few questions as a discussion. Avoid naming a method with no example. Don't ignore how you handle students who dominate or stay silent.
Question 22: What is the state of your student records? What is one thing you would like to improve upon?
Example answerThe interviewer wants to know that you keep accurate, secure, up-to-date records, and that you look for ways to do it better.
Describe your current system in plain terms: where grades and attendance are kept, how often you update them, and how you protect student privacy under your school's rules. Then name one honest improvement and how you plan to make it.
Sample answer: "My grades and attendance are all in the school's learning management system, and I update them within a week of each assignment so students always know where they stand. I don't keep student records on personal devices, and I follow the school's privacy rules when I share anything. One thing I want to improve is how I record notes from advising meetings. Right now they're in separate files, so I plan to move them into the school's advising system to keep everything in one secure place."
Pitfalls: Don't claim your records are perfect. Avoid describing records kept in insecure places. Don't name an improvement without a plan.
Question 23: Share an experience in which your regular office hours helped you in assisting your students.
Example answerThe interviewer wants to see that you make yourself available to students and use that time to help them succeed.
Use Situation, Task, Action, Result. Describe a student or group who came to office hours, what they were struggling with, how you helped, and what changed. You can also mention how you encourage students to come.
Sample answer: "Early in one term, a student came to my office hours after failing the first quiz. We went through the quiz together and found the problem wasn't the content but how they were taking notes in lectures. I showed them how to turn their notes into practice questions after each class and asked them to come back in two weeks. They did, and by the midterm they were doing much better. After that, I started announcing a topic for some office hours, which brought in more students."
Pitfalls: Don't describe office hours nobody attended without saying what you changed. Avoid sharing private details about students. Don't skip the outcome.
Question 24: Share an effective method you have used to advise students on curricula and career issues.
Example answerThe interviewer wants to see how you help students plan their courses and think about careers in a practical, personal way.
Describe your method: how you prepare for advising meetings, the questions you ask, the resources you point students to, and how you follow up. A short example of a student you advised helps.
Sample answer: "Before each advising meeting, I review the student's degree progress so we don't spend the time on paperwork. I start by asking what they enjoy and what they hope to do after graduating, and then we map out the next two terms together. I connect students with the career center and with alumni in fields they're curious about. One student was torn between two paths, so I suggested an elective and a short informational interview for each. By our next meeting, they had chosen a direction and adjusted their course plan."
Pitfalls: Don't describe advising as only signing forms. Avoid steering students toward your own interests. Don't give advice outside what you know; refer students to the right office.
Question 25: Provide an effective method you have used to keep abreast of developments in your field.
Example answerThe interviewer wants to know that you stay current in your field and bring new knowledge into your teaching and research.
Name the specific methods you rely on, such as journal alerts, conferences, professional associations, reading groups, or working with colleagues. Then give an example of something new you learned and how you used it.
Sample answer: "I set up alerts for a few key journals and block out an hour each week to skim new articles. I also attend one major conference a year and belong to a small reading group with colleagues from other schools. Last year, the group discussed a new approach to a topic I teach every term. I tried it in one unit, asked students for feedback, and kept it because their questions showed a deeper understanding of the material."
Pitfalls: Don't name a long list of sources with no example. Avoid claiming methods you don't actually use. Don't skip how new knowledge reaches your students.
Question 26: What factors do you consider when selecting class materials and supplies?
Question 27: Share an experience in which collaborating with colleagues helped you to address a difficult issue.
Example answerThe interviewer wants to see that you work with colleagues to solve problems that are too big for one person.
Use Situation, Task, Action, Result. Describe the difficult issue, who you worked with, what each person contributed, and how the joint effort solved it.
Sample answer: "Several of us noticed that students were arriving in our upper-level courses without skills the introductory course was supposed to cover. Instead of each of us patching the gap alone, I invited the instructors from both levels to meet. We compared syllabi and found that two topics had been dropped when the introductory course was revised. We agreed to add them back and built a short review module for students who had already taken the course. The next year, fewer students needed extra help early in the term."
Pitfalls: Don't tell a story where you did all the work. Avoid criticizing colleagues. Don't skip the result.
Question 28: Describe your experience serving on academic and/or administrative committees. How did your service benefit your school?
Question 29: Provide an effective method you have used to maintain equipment to support research projects.
Question 30: Share an experience in which you reviewed papers or served on an editorial board for a scientific journal.
New to interviews? Start with the common questions every interview asks →