Dental Lab Technician Interview Questions
For dental lab technicians who make and repair dentures and other appliances. Interviews focus on choosing designs and spotting problems before appliances go back to the dentist.
30 questions, ranked by what the job needs most
Print the top 10:Scoring sheetPractice sheet
Question 1: When a new case arrives, how do you use the prescription and the impression or model to decide how to design the restoration?
Example answerThe interviewer wants to know whether you read a case carefully before you start, and whether you ask when something is unclear.
Build your answer as a sequence. Start with the prescription: the type of restoration, material, shade and any special notes. Then describe what you check on the impression, model or scan, such as clear margins, enough room for the material, the opposing teeth and the bite. End with how you handle gaps or conflicts, usually by contacting the dental office before you begin.
Sample answer: "I read the whole prescription first, including the notes at the bottom, because that is where special requests usually are. Then I check the impression or model for clean margins and torn areas, mount it, and look at the space and the bite. Once, a prescription asked for a full-contour crown, but the model showed very little room. I called the office, explained what I saw, and the dentist decided to adjust the prep before I went ahead."
Pitfalls to avoid: describing only the fabrication steps and skipping the reading and checking; saying you fill in missing details yourself; leaving out how you resolve unclear prescription details.
Interviewer tipA strong answer covers reading the prescription closely, checking the impression or scan for margins and space, and calling the office when something is unclear; guessing at missing details is a red flag.
Candidate tipWalk through your steps in order: what you check on the prescription, what you look for on the model or scan, and how you settle questions with the dentist before you start.
Question 2: Tell me about a crown, bridge, denture or appliance you made or repaired that was hard to get right.
Example answerThe interviewer wants to see real bench skill: how you work through a hard case and check your own work.
Use Situation, Task, Action, Result. Name the case and what made it hard, such as limited space, an uneven bite, a long-span bridge or a worn denture. Then go through the steps you took, the materials you chose and how you checked fit and bite before it left the lab. Finish with how it went when the dentist seated it and what you learned.
Sample answer: "I had a three-unit bridge where the opposing tooth had drifted, so there was very little room on one end. I checked the mounted models on the articulator, adjusted the framework design to keep the connector strong, and talked with my supervisor about the material. I checked the bite several times while building it up. The dentist seated it with only a small adjustment, and I now check the opposing model for drift on every bridge case."
Pitfalls to avoid: choosing an easy case; skipping how you checked the result; claiming numbers or results you cannot back up.
Interviewer tipA strong answer names the specific challenge, such as limited space or a tricky bite, and how they solved it step by step; vague answers with no technical detail are a red flag.
Candidate tipChoose one real case, explain what made it difficult, the steps and materials you used, how you checked the result, and how it went when the dentist seated it.
Question 3: Walk me through a time you checked a dental appliance against the work order, including the way the upper and lower teeth met.
Interviewer tipListen for a specific work order requirement, a check of where the teeth met, and what they found. Looking at the appliance on its own leaves the bite untested.
Candidate tipName one requirement you checked on the work order and describe how you checked where the upper and lower teeth touched on the models. End with what you found and whether anything needed adjusting.
Question 4: Walk me through a case where tooth contacts on an articulator did not match the bite record.
Interviewer tipThe case should show checks of the bite record and model mounting before changing tooth contacts, with a clear result. Grinding the model teeth to hide an unexplained mounting mismatch is a red flag.
Candidate tipDescribe the mismatch and your checks of the bite record, model seating and mounting. Explain how you resolved or referred the discrepancy, what the final check showed, and what you learned.
Question 5: Share an example of a small detail you caught on a dental lab work order that made a difference to the case.
Interviewer tipListen for the exact detail they caught, how they confirmed it, and what changed on the case. Guessing which tooth or shade the dentist meant is a red flag.
Candidate tipPick a case where a detail such as the tooth number or shade on the work order needed a closer look. Say what made you check it, how you cleared it up, and what changed on the case.
Question 6: Describe a case where you removed excess metal or porcelain and polished a dental restoration while keeping its shape.
Interviewer tipA strong answer shows how they controlled where material came off and checked the polished surface. Grinding away an edge needed for fit just to smooth the surface is a red flag.
Candidate tipName the tools you used to trim and polish the restoration. Say which edge or curve you had to preserve and what you checked on the finished surface.
Question 7: Share an example of how you processed dental materials, such as melting metal or mixing plaster, porcelain or acrylic, to form a prosthesis.
Example answerThe interviewer wants to learn how you have prepared dental materials and used them to form a prosthesis.
Use Situation, Task, Action, Result. Choose one real case, name the material and explain your own preparation and forming steps. Include the instructions and checks you used, since processing conditions differ by material. End with the result you observed.
Illustrative sample, to adapt to your actual experience: "I processed acrylic for a denture base. I checked the material's instructions before measuring and mixing it, then followed the specified working and curing stages to form the base. I checked it for visible voids and distortion and assessed its fit on the model before continuing with the case. Recording the material and processing details gave me a reference when reviewing the finished base."
Avoid giving only a general procedure, treating processing conditions as the same for every material, or leaving out how you checked the formed prosthesis.
Interviewer tipListen for the candidate's own material preparation, forming steps and checks on the prosthesis. Guessing at processing conditions instead of checking the material's instructions is a red flag.
Candidate tipDescribe one real case, the material you processed, the steps you took and how you checked the formed prosthesis. Explain the result without assuming all materials use the same method.
Question 8: Describe a time you turned an impression into a model of the teeth and gums for a denture or other dental appliance.
Interviewer tipListen for how they made the model and checked the surfaces the appliance would sit on. Using a model with missing detail where the appliance needs to fit is a red flag.
Candidate tipA course lab example works here. Explain how you made the model, which areas you checked for bubbles or missing detail, and whether it was ready to use for the appliance.
Question 9: Tell me about a denture you repaired after the base cracked.
Interviewer tipA good example shows how they kept the denture's shape and checked that the repaired joint was secure and smooth. Watch for a repair that leaves the edges of the crack out of line.
Candidate tipStart with where the base cracked, then explain how you kept the edges lined up during the repair. Say what your final check showed about the joint and the denture's shape.
Question 10: Give an example of how you prepared the metal on a crown so the porcelain would bond to it.
Interviewer tipListen for surface preparation suited to the metal and how they kept it clean before applying porcelain. Touching the cleaned surface with bare fingers can contaminate it.
Candidate tipName the metal and describe how you prepared and protected its surface before the porcelain went on. Say how you knew the surface was ready for porcelain.
Question 11: Describe the methods you have used to build and shape wax teeth.
Question 12: Share an experience in which you effectively applied porcelain paste or wax over prosthesis frameworks or setups.
Question 13: Share an experience in which you shaped and soldered wire and metal frames and bands for dental products.
Question 14: Provide an experience in which you effectively prepared wax bite blocks and impression trays for use.
Question 15: Share your experience using acrylic resins to fill chipped and low spots in surfaces of devices.
Question 16: How do you plan and prioritize crowns, dentures and appliances at your bench when different dental offices need them on different days?
Interviewer tipA sound plan accounts for each case's due date, remaining steps and time at the bench. Ignoring an office's deadline to finish easier cases first is a red flag.
Candidate tipWalk through how you sort the crowns, dentures and appliances by due date and remaining work. Explain how you adjust the bench schedule when a case needs more time.
Question 17: Walk me through how you chose a fix for a case a dentist returned because it did not fit.
Example answerThe interviewer wants to see how you use evidence from a returned dental case to choose a fix rather than guess at the cause.
Use Situation, Task, Action, Result to organize one real example. Briefly describe the fit complaint and your responsibility. Spend most of the answer on the records, impression, model or articulator setup you checked, the findings that guided your choice, and your own actions. Finish with the result and what you learned.
For example: "A dentist returned a crown because the bite was high. I needed to find the cause before making an adjustment. I reviewed the office's notes and checked the crown on the model. Comparing the articulator setup with the bite record showed a mounting error. I corrected the setup, adjusted the crown and checked the contacts again. The office later confirmed the bite was acceptable. After that, I added a mounting check before final finishing."
Avoid blaming the impression without evidence, listing checks without explaining their findings, or leaving out whether the fix worked.
Interviewer tipA strong example traces their checks of the returned case to the chosen fix, its result and a lesson. Blaming the dental office without checking the impression, model or their own work is a red flag.
Candidate tipUse a real returned case. Explain the fit problem, the impression, model or lab work you checked, and the evidence behind your fix. End with the result and what you learned.
Question 18: Share an example of how you used case records and information from a dental office to clear up an incomplete or unclear prescription.
Example answerThe interviewer wants to learn how you sort through case information and get clear instructions before working from an incomplete prescription.
Build your answer with Situation, Task, Action, Result. Identify the missing detail and your responsibility for resolving it. Explain which case records you reviewed, which details mattered, and what you confirmed with the dental office. Include how you recorded the clarification, the outcome and a lesson from the case.
For example: "A crown prescription arrived without a shade. I needed a confirmed shade before starting the color work. The case notes mentioned an earlier restoration, and attached photos showed its location, but neither gave a confirmed shade for the new crown. I contacted the dental office with a specific request for the dentist's intended shade. Once the office confirmed it, I recorded the response with the prescription and continued the case. We completed it by the agreed date. I learned to check prescriptions for missing details as soon as cases arrive."
Avoid treating a photo as confirmation of a missing shade, describing every record without explaining its relevance, or leaving the office's clarification undocumented.
Interviewer tipListen for their own comparison of case records with the office's clarification, a clear outcome and a lesson. Guessing the missing shade, material or design instead of getting confirmation is a red flag.
Candidate tipPick a real prescription with missing or unclear details. Explain which case records helped, what you confirmed with the dental office and how you recorded it. Close with the outcome and a lesson for future cases.
Question 19: Describe how you handled a problem you found while reviewing a dental case's prescription or lab work records.
Interviewer tipListen for a specific problem found in the prescription or lab records, their own checks, and a clear response. Guessing at an unclear prescription to keep the case moving is a red flag.
Candidate tipPick one real case. Name the prescription detail or record entry that raised concern, how you checked it, who you contacted, and how the case turned out.
Question 20: Describe a time you improved lab work by applying a new technique or digital tool, such as design software or scanned impressions.
Interviewer tipListen for their own use of the technique or digital tool, a checked result and a lesson from trying it. Claiming better crown fit or faster turnaround without checking either is a red flag.
Candidate tipChoose one real change to your lab work. Briefly explain the need, focus on how you used and checked the technique or digital tool, and finish with the result and what you learned.
Question 21: Tell me about a time you learned to use a new piece of lab equipment, such as a furnace, milling unit or 3D printer.
Interviewer tipLook for hands-on learning: the manual, test runs on practice pieces and asking for help before using it on a patient case; learning on live cases without checks is a red flag.
Candidate tipName the equipment, how you learned it, what you tested before trusting it on real cases, and what you do differently now that you know it.
Question 22: Tell me how you handled a dentist or dental office staff member who was unhappy with a case you made.
Example answerThe interviewer wants to see how you respond respectfully to a dental office's complaint while taking responsibility for checking your work.
Use Situation, Task, Action, Result to tell one real story. Briefly describe the complaint and your role. Focus on your own listening, response and follow-through, then explain the outcome with the office and what you learned. Keep the account factual, even if the conversation was tense.
For example: "An office staff member was upset about a rough edge on a denture I had finished. I needed to understand the complaint and arrange a correction. I let them explain, repeated the area they identified and agreed on when they needed the case back. When it returned, I found an area I had missed during finishing. I corrected and polished it, checked the rest of the denture and told the office what I had done. They confirmed the issue was resolved. I learned to slow down during my final edge check."
Avoid criticizing the dentist or staff member, claiming you fixed the complaint without checking the case, or describing only what your supervisor did.
Interviewer tipTheir example should show calm listening, their own response to the case complaint and the outcome with the office. Dismissing the complaint without checking the case is a red flag; ask what they learned.
Candidate tipChoose one real complaint about a case you made. Set the scene briefly, focus on how you listened and responded, then describe the outcome with the dental office and what you would repeat or change.
Question 23: Tell me about a time you had to tell your supervisor or a coworker that a case would miss its due date.
Interviewer tipA strong answer shows they spoke up early, gave the reason and a new estimate, and offered options; hiding the delay until the last minute is a red flag.
Candidate tipExplain why the case was running late, when and how you raised it, what you proposed, and how the office was kept informed. Show that you did not wait until the day it was due.
Question 24: Share an experience in which your diligence of inspecting equipment, structures, or materials helped you identify a problem or the cause of a problem.
Example answerThe interviewer wants evidence that you inspect carefully and that your checks catch problems before they grow.
Use Situation, Task, Action, Result. Say what you were inspecting and why, what you noticed, how you traced the cause, and what happened after you reported or fixed it.
Sample answer: "During a routine walk-through, I noticed a small puddle of fluid under one of our machines. It wasn't on the checklist, but I wiped it up and checked again an hour later, and it was back. I followed the line and found a fitting that had worked loose. I tagged the machine, reported it to my supervisor, and maintenance replaced the fitting before the end of the shift. If it had failed during a full run, we would likely have lost most of a day."
Pitfalls: Don't claim you never miss anything. Avoid stories where you found a problem but didn't report it. Don't skip how you confirmed the cause.
Question 25: Share an example of when you went above and beyond the "call of duty".
Interviewer tipLook for answers that show the candidate is dependable.
Candidate tipThe employer wants to know that you are dependable.
Question 26: Share an experience in which you conducted a test of a product, service, or process and successfully improved the quality or performance.
Example answerThe interviewer wants evidence that you test things carefully and use what you find to make them better.
Use Situation, Task, Action, Result. Explain what you tested and why, how you set up the test, what the results showed, and what you changed. End with how you measured the improvement.
Sample answer: "Customers kept saying our online order form was confusing, so I was asked to look into it. I had five coworkers who had never used the form place a test order while I watched and took notes. Four of them got stuck on the same shipping step. I suggested moving that step and rewording two labels, then ran the same test again. All five finished without help, and complaints about the form dropped over the next month."
Pitfalls: Don't describe a change made on a hunch with no test. Avoid skipping how you checked the result. Don't use jargon without explaining it.
Question 27: Name a time when you identified strengths and weaknesses of alternative solutions to problems. What was the impact?
Example answerThe interviewer wants to see that you weigh options carefully instead of going with the first idea, and that your reasoning leads to better results.
Use Situation, Task, Action, Result. Describe the problem, list two or three options you considered, and give the main strength and weakness of each. Explain which you chose and why, then describe the impact.
Sample answer: "Our team needed a faster way to answer common customer questions. I compared three options: hiring a part-time assistant, writing a help page, or creating email templates. Hiring was quick but costly. A help page would take longer but reduce calls over time. Templates were cheap but only sped up our replies. I recommended the help page, with templates as a short-term fix. Within a few months, repeat questions fell noticeably."
Pitfalls: Don't list options without saying what you compared them on. Avoid choosing an option without explaining the trade-off. Don't leave out the impact.
Question 28: Provide an experience that demonstrates your ability to manage time effectively. What were the challenges and results?
Example answerThe interviewer wants to know how you plan your time and handle competing demands, and whether you meet deadlines.
Use Situation, Task, Action, Result. Name the specific challenges, such as overlapping deadlines or interruptions. Describe the steps you took to plan and protect your time, and what you did when something came up. End with the results the question asks for.
Sample answer: "During one busy week, I had a report due Thursday, two new team members to train, and my usual daily tasks. I mapped out the week on Monday, scheduled training for the mornings when things were quieter, and blocked two afternoons for the report. When an urgent request came in Wednesday, I asked a colleague to cover one training session. The report went in a day early, and both new team members finished their training on schedule."
Pitfalls: Don't just list time-management tools. Avoid a story where you met the deadline only by working through the night. Don't skip the challenges.
Question 29: Provide an example when your ethics were tested.
Example answerThe interviewer wants to know whether you do the right thing when it is inconvenient, and how you handle pressure to cut corners.
Use Situation, Task, Action, Result. Describe the pressure or temptation without naming people, explain the choice you made and why, and how you handled the conversation. Keep the focus on your actions, not on judging others.
Sample answer: "Near the end of a quarter, a coworker asked me to record a sale as complete even though the customer hadn't signed yet, so our numbers would look better. I told them I wasn't comfortable doing that and suggested we tell our manager the deal would close the following week. My manager agreed it should wait. The customer signed early in the new quarter, and our records stayed accurate."
Pitfalls: Don't say your ethics have never been tested. Avoid stories that make you sound self-righteous or that share confidential details. Don't pick an example where you went along with the wrong choice and stop there.
Question 30: How do you balance cooperation with others and independent thinking? Share an example.
Example answerThe interviewer wants to see that you can work well with a team while still bringing your own judgment, and that you know when to speak up and when to go along.
Start with a short answer about how you balance the two, then give one example. A good example shows you sharing your own view, listening to others, and then supporting the team's decision even if it wasn't yours.
Sample answer: "I try to form my own view first, share it clearly, and then commit to whatever the group decides. On one project, the team wanted to launch a new form right away. I thought we should test it with a few users first and explained why. We agreed on a one-week trial. Testing found a confusing field, we fixed it, and the full launch went smoothly."
Pitfalls: Don't present yourself as someone who always goes along or always insists on your own way. Avoid a story where you ignored the team's decision. Don't skip the example.
Interviewer tipTry to determine if the candidate has a cooperative attitude or is otherwise good-natured.
Candidate tipThe employer wants to know that you have a cooperative attitude or are otherwise good-natured.