Science Faculty Member Interview Questions
For college biology faculty in teaching roles or roles that combine teaching and research. Interviews focus on leading biology labs and mentoring students in research.
30 questions, ranked by what the job needs most
Print the top 10:Scoring sheetPractice sheet
Question 1: Walk me through a biology lecture you prepared and delivered that worked well, from choosing the content to checking what students understood.
Example answerThe interviewer wants to see how you turn dense biology content into a lecture students can follow and learn from. Walk through it in order: the course and students, the learning goals you set, how you chose and sequenced the content, what you did during class to keep students thinking, and how you checked what they understood. Sample answer: "In my intro cell biology course, students kept mixing up the steps of signal transduction. I set two goals for the lecture: trace a signal from receptor to response, and predict what happens when one step fails. I cut some detail, built the pathway one step at a time on the board, and paused every fifteen minutes for a short prediction question students answered in pairs. Their answers showed most of them were confusing second messengers with receptors, so I spent a few extra minutes there. On the next quiz, far fewer students made that mistake, and I kept the format for the following term." Pitfalls to avoid: describing only the slides you covered; skipping how you checked understanding; picking a lecture so general it could be from any subject.
Interviewer tipListen for how they set learning goals, broke a dense topic into steps and checked understanding during class; a lecture described only as slides they covered is a red flag.
Candidate tipPick a real lecture, such as one on cell signaling or gene regulation. Say who the students were, how you structured it, how you checked understanding, and what you would keep.
Question 2: Tell me about a time you taught a hard biology concept, such as natural selection or enzyme kinetics, so that students finally understood it.
Example answerThe interviewer wants to know whether you can find out why students are stuck and change your teaching to fix it. Use Situation, Task, Action, Result: the concept and the course, what students got wrong, what you did differently, and how you knew it worked. Sample answer: "In an introductory biology course, many students wrote that animals evolve because they need a trait to survive. I realized my lectures had not challenged that idea directly. I designed a short activity where groups tracked a simulated population of beetles over several generations, with different colors surviving at different rates. Afterward, each group had to explain in writing why the population changed even though no beetle changed its own color. We then compared their explanations with the common misconception. On the next exam, more students described variation and differential survival correctly, and several mentioned the activity in course feedback." Pitfalls to avoid: choosing a concept that is not really hard; describing the activity without the misconception it targeted; claiming success without any evidence from student work.
Interviewer tipListen for how they found the misconception, the example or activity they used, and how they checked understanding; repeating the same explanation more slowly is a red flag.
Candidate tipChoose one concept students often get wrong. Explain what confused them, the analogy, model or activity you used, and how you knew it worked.
Question 3: Describe a time you resolved inconsistent grading of biology lab reports by teaching assistants.
Interviewer tipA strong example shows how they compared lab reports against the rubric, brought graders into agreement, and corrected affected scores. Accepting different standards for different students is a red flag.
Candidate tipUse one real grading discrepancy. Explain how you checked the lab reports, worked with the teaching assistants on the rubric, and confirmed the scores were fair. End with what you changed for later grading.
Question 4: What do you check when preparing lecture notes and lab handouts for the same college biology unit?
Interviewer tipA strong answer connects the lecture topic to what students will do in the lab. A red flag is giving students a handout with steps they can't carry out using the equipment provided.
Candidate tipStart with what students should learn in the unit. Use an example to show how you check that the lecture notes support the lab and that the handout fits the equipment and time students have.
Question 5: Share an example of how you revised the sequence of topics in a biology course to better prepare students for later coursework.
Interviewer tipListen for evidence that the original topic order left students unprepared and that the new sequence helped. Moving topics without checking the knowledge later coursework requires is a concern.
Candidate tipChoose one biology course whose topic order you changed. Name the preparation gap, explain your role in the revision, and describe evidence from later coursework that helped you judge the result.
Question 6: Tell me how you brought quieter students into a biology class discussion that a few students were dominating.
Interviewer tipThe example should show how they made room for quieter students without embarrassing them and kept the biology discussion useful. Treating silence as proof of poor preparation is a red flag.
Candidate tipRecall one discussion and the participation imbalance. Focus on the steps you took to open the conversation to more students, then describe how participation changed and what you learned.
Question 7: What would you do if you saw a student handling a biological sample without the required protective equipment during a teaching lab?
Interviewer tipStopping the unsafe handling comes first, followed by making the sample safe and restoring required protection before work resumes. Letting the student finish the procedure unprotected is a wrong first move.
Candidate tipStart with how you would stop the unsafe handling without increasing exposure. Explain how you would make sure the sample and student were safe before allowing lab work to resume.
Question 8: Describe a time you noticed students in a biology course were struggling with a skill or concept and changed how you taught it.
Example answerThe interviewer wants to see that you watch for learning gaps and respond with a change you can show worked. Use Situation, Task, Action, Result: the course, how you spotted the gap, what you changed, and the evidence that students improved. Sample answer: "In a sophomore genetics lab, the first round of lab reports showed that many students could run the experiment but could not interpret their own graphs. Their discussion sections just repeated the results. I added a short in-class exercise before each report, where pairs looked at a sample graph and wrote two sentences on what it showed and one on what it did not. I also gave them a one-page guide with an annotated example. By the third report, most discussions explained the data instead of restating it, and the grading went faster because the reports were clearer." Pitfalls to avoid: blaming students' earlier preparation; describing a change without saying how you noticed the problem; giving no evidence that the change helped.
Interviewer tipListen for how they spotted the gap, from exam results, lab reports or questions, and how they checked that the new approach worked; blaming students' preparation is a red flag.
Candidate tipName the course and the gap, such as reading graphs or writing lab reports. Explain how you found it, what you changed, and the evidence that students improved.
Question 9: Tell me how you helped a student outside class who was struggling to interpret results for a biology lab report.
Interviewer tipListen for how the candidate found the gap in the student's reasoning and checked their understanding. Giving the student a conclusion to copy into the report is a red flag.
Candidate tipPick a real case and name the result the student was stuck on. Explain what you did to help them make sense of their data, then say what they could explain on their own afterward.
Question 10: Give an example of how you handled an ambiguous question you discovered after students took a biology exam.
Interviewer tipA good example shows a review of the item's wording and a consistent remedy for all affected exam papers. Adjusting only the grades of students who complained is a red flag.
Candidate tipChoose one ambiguous biology exam item. Explain how you identified the ambiguity, decided on a fair grading response, and communicated it to the class. Close with the result and the change you made to the item.
Question 11: How do you check a biology course's grade records for errors before submitting final grades?
Interviewer tipExpect checks against the original assignment scores, syllabus weights, and missing or changed grades before submission. Filling gaps with guessed scores is a red flag.
Candidate tipWalk through your checks from assignment scores to the final course grade. Name the records you compare, how you resolve mismatches, and how you confirm a correction carried through to the final grade.
Question 12: Walk me through a time you checked a new biology finding before deciding to include it in your course.
Interviewer tipLook for a real finding they checked against the study's methods, limits, and other literature before using it in class. Presenting an exciting headline as settled biology is a red flag.
Candidate tipName one finding you considered for a biology course. Describe the sources you checked, the limits you found, and your decision about teaching it. Explain what the review taught you about evaluating new findings.
Question 13: Tell me about a student researcher you mentored in your lab and how their skills grew under your guidance.
Example answerThe interviewer wants to know how you develop students into independent researchers, since mentoring is a large part of the job. Use Situation, Task, Action, Result: who the student was, where they started, how you guided them, and what they could do on their own by the end. Sample answer: "An undergraduate joined my lab with strong grades but no research experience. I started her on a well-defined task, running a standard protein assay, and checked her notebook with her each week. Once she was consistent, I asked her to troubleshoot a step that kept failing instead of fixing it myself. We met to talk through her ideas, and she found a buffer problem on her own. By her second year she was designing small experiments, analyzing the data, and presenting a poster at our campus research day. She later told me the troubleshooting is what made her feel like a scientist." Pitfalls to avoid: describing the project instead of the student's growth; taking credit for the student's work; mentioning only praise and no feedback.
Interviewer tipStrong answers show how they matched tasks to the student's level, gave regular feedback and let the student take over steps; doing the work for the student is a red flag.
Candidate tipDescribe one student, where they started, the skills you taught, such as designing a protocol or analyzing data, and what they could do on their own by the end.
Question 14: Describe a time you helped a biology teaching assistant improve an ineffective teaching practice.
Interviewer tipListen for an observed teaching problem, specific feedback, and a later check of the assistant's teaching. Leaving the assistant to repeat a practice known to confuse students is a concern.
Candidate tipPick one teaching practice you helped a biology assistant change. Briefly describe the problem, then focus on your feedback, the support you provided, and the evidence of improvement.
Question 15: Describe research you have conducted. How did you publish your findings?
Example answerThe interviewer wants to understand your research: what you studied, how you did it, and how you shared the results with others in your field.
Give a short, plain summary of one project: the question, the method, the main finding, and why it matters. Then explain how you published or presented it, such as in a peer-reviewed journal, at a conference, or in a report, and what you learned from the review process.
Sample answer: "My most recent project looked at why some students stop attending introductory courses partway through the term. I surveyed students in several sections and followed up with short interviews. The main finding was that students who fell behind on early assignments rarely caught up, even if they kept attending. I presented early results at a regional conference, used the feedback to strengthen the analysis, and then submitted a paper to a peer-reviewed journal. It was accepted after one round of revisions."
Pitfalls: Don't use jargon a general audience can't follow. Avoid listing publications without describing the work. Don't overstate your role on co-authored projects.
Question 16: Tell me about a time you revised a biology manuscript in response to a reviewer's criticism of your interpretation of the findings.
Interviewer tipA strong account separates a justified correction from a disagreement they could support with evidence. Dismissing the reviewer without checking the biological claims is a red flag.
Candidate tipChoose one criticism of your manuscript's interpretation. Explain how you checked it against the findings, revised the claims or supported your position, and responded to the reviewer. End with the outcome and lesson.
Question 17: Give an example of how you strengthened a biology research grant proposal after feedback exposed a weakness in the study plan.
Interviewer tipExpect a specific weakness in the biology study plan, a reasoned revision, and an account of the proposal's outcome so far. Hiding a known design flaw behind stronger wording is a red flag.
Candidate tipChoose one grant proposal and one weakness raised in feedback. Explain the change you made to the biology study plan, why it addressed the concern, and the outcome you can actually report.
Question 18: Describe how you handled a heated dispute with a student over a grade or policy in your biology course.
Example answerThe interviewer wants to learn how you handle an upset student while keeping grading or course policy fair.
Use Situation, Task, Action, Result to organize one real example. Briefly describe the dispute and your responsibility as the instructor. Spend most of the answer on how you listened, checked the student's concern against the rubric or course policy, and explained your decision. Close with the outcome and something you learned. Leave out identifying details about the student.
For example: "A student angrily challenged the grade on a biology lab report, saying I had ignored their explanation. I let them explain the concern, then reviewed the report with them against the rubric. I showed where their conclusion needed support from their observations. The review did not reveal a grading error, so I kept the grade and explained how to strengthen that part of the next report. The conversation settled down. I learned to make that rubric criterion clearer before the next assignment."
Avoid portraying the student as the problem, changing a grade just to stop the argument, or giving a vague account that hides your own actions.
Interviewer tipA strong example shows how they heard the student's concern, used the grading rubric or course policy, and learned from the outcome. Changing a grade just to end the argument is a red flag.
Candidate tipChoose one real dispute in your biology course. Briefly explain the student's concern, focus on how you responded using the rubric or course policy, and end with the outcome and what you learned.
Question 19: Tell me about a time you had to tell a student they were failing your course or were not ready to move on in their program.
Example answerThe interviewer wants to see that you deliver hard news honestly, early enough to matter, and with a clear path forward. Use Situation, Task, Action, Result: the student's situation, how you prepared, what you said and offered, and what happened next. Sample answer: "Midway through the term, a student in my physiology course had failed both exams and missed several labs. Before the withdrawal deadline, I emailed to ask her to meet privately. I had her grades and the remaining assignments ready, and I told her plainly that passing would need very high scores on everything left. I laid out her options: withdrawing, working with tutoring, or meeting with her advisor about her schedule. She chose to withdraw and retake the course the next term. She did well the second time and stopped by to say the early, direct conversation had helped her plan." Pitfalls to avoid: softening the message so much that the student misses it; waiting until it is too late to act; giving bad news without options or resources.
Interviewer tipLook for timing, privacy and a clear plan, such as options, deadlines and campus resources; vague messages or waiting until it was too late to act are red flags.
Candidate tipExplain how you prepared, where and when you talked, what you said, and what options you offered. Close with how the student responded and what happened next.
Question 20: How do you plan and prioritize your week when teaching, research and committee work all need your time?
Example answerThe interviewer wants to know whether you can meet students' needs without letting research or service slide, since the job pulls in all three directions. Describe your system, how you choose when deadlines collide, and a recent example. Sample answer: "I plan the term first, putting exams, lab report due dates and grant deadlines on one calendar so I can see busy weeks coming. Each week I block two mornings for writing and data analysis, set fixed grading times so students get work back within a week, and keep office hours steady. Committee work goes into the afternoons. When things collide, student-facing deadlines come first, then hard external deadlines like a grant, then everything else. Last spring a grant deadline landed during midterms. I knew it was coming, so I drafted the proposal early, asked a teaching assistant to help with the lab grading I had planned for, and told students the exact day they would get their midterms back." Pitfalls to avoid: claiming you never fall behind; naming tools without a method; leaving research or service out entirely.
Interviewer tipStrong answers name a real system, such as protected writing time and set grading days, and say what gives way under pressure; letting grading slip without telling students is a red flag.
Candidate tipDescribe how you schedule a typical week during the term, how you decide what comes first when deadlines collide, and give a recent example of it working.
Question 21: Share an example of how you advised a biology student who was unsure which career path to pursue.
Interviewer tipTheir example should connect the student's interests with realistic biology career options and ways to explore them. Steering every student toward the same career without hearing their goals is a red flag.
Candidate tipDescribe one student's uncertainty without identifying them. Explain how you explored their interests, helped compare biology career paths, and supported their next step. End with the outcome you know.
Question 22: How do you arrange office hours so students in your biology courses can get help when their schedules conflict with yours?
Interviewer tipExpect clearly announced office hours plus a workable way to arrange another meeting when class or work schedules conflict. Refusing all alternatives despite repeated conflicts would leave students without access.
Candidate tipDescribe how you announce office hours, find out about schedule conflicts, and arrange another meeting time or format. Keep the focus on a predictable way for biology students to reach you.
Question 23: Walk me through how you analyzed a data set from your own research and decided what conclusions it supported.
Example answerThe interviewer wants to see sound analytical judgment: careful handling of data, a fitting analysis, and honest limits on what you claim. Walk through it in order: the question and the data, how you checked and cleaned it, the analysis you chose and why, and how you decided what the results did and did not show. Sample answer: "I was studying how temperature affects growth in a plant species. I first plotted the raw measurements and found a few values from one growth chamber that were far off, which turned out to be a sensor fault, so I excluded that chamber and noted why. Because the data had repeated measures on the same plants, I used a mixed model rather than a simple comparison of means. Growth rose with temperature up to a point and then leveled off. In the paper I described that pattern but did not claim a cause, since we had not measured anything about the plants' physiology." Pitfalls to avoid: naming software instead of explaining decisions; skipping how you checked data quality; overstating what the results prove.
Interviewer tipStrong answers cover checking data quality, choosing a fitting statistical approach and stating limits; claiming more than the data shows is a red flag.
Candidate tipPick one study. Describe the data, how you cleaned and analyzed it, the tools you used, and how you decided what you could and could not conclude.
Question 24: Describe a time you worked through a disagreement with a colleague about learning goals for different sections of a biology course.
Interviewer tipLook for their own effort to compare learning goals and reach a decision grounded in what biology students needed. Attacking the colleague instead of discussing the course goals is a red flag.
Candidate tipSet out one disagreement over biology course goals. Describe how you compared the options with your colleague, worked toward a decision, and assessed the effect on the course.
Question 25: Share an example of how you chose which biology teaching lab equipment to replace within a limited budget.
Interviewer tipListen for a real comparison of equipment condition, safety, teaching needs, and cost, followed by the purchase outcome. Keeping unsafe lab equipment in use to stay within budget is a red flag.
Candidate tipUse one equipment replacement decision. Explain the budget limit, the alternatives you weighed, and your part in choosing what to replace. Finish with the effect on the biology lab and what you learned.
Question 26: Walk me through a time you used evidence from biology teaching labs to help a committee decide on lab-section size limits.
Interviewer tipThe example should connect biology lab capacity, equipment access or supervision demands with the committee's decision. Treating the room's total capacity as proof that every student has safe lab bench space is a red flag.
Candidate tipName the proposed lab-section limit and the evidence you brought from biology teaching labs. Focus on your contribution to the committee's discussion, the decision reached, and what you learned.
Question 27: Share an effective method you have used to provide students with course-related experiences outside of the classroom.
Question 28: What factors do you consider when reviewing papers for publication in journals?
Question 29: How have you corrected a prospective student's mistaken expectations about a biology degree during recruitment?
Interviewer tipListen for a real recruitment conversation that corrected the claim while helping the student understand the biology program. Promising admission, employment, or a license to secure enrollment is a red flag.
Candidate tipRecall one mistaken expectation about a biology degree. Describe how you checked what the prospective student meant, gave accurate information about the program, and helped them find a reliable next source.
Question 30: How do you plan maintenance for biology teaching lab equipment so it is ready for student use?
Interviewer tipExpect maintenance based on equipment instructions, checks of service records, and repairs arranged before student use. Leaving a known faulty instrument available for a class is a red flag.
Candidate tipUse instruments from a biology teaching lab to explain how you schedule care, check service records and arrange repairs. Describe how you keep faulty equipment out of student use.
New to interviews? Start with the common questions every interview asks →