Aircraft Maintenance Technician Interview Questions
For aircraft mechanics who service engines and airframe systems. Interviews focus on inspecting components, checking completed repairs and keeping maintenance logs.
30 questions, ranked by what the job needs most
Print the top 10:Scoring sheetPractice sheet
Question 1: How do you check completed aircraft maintenance before it is signed off for return to service?
Example answerThe interviewer wants to know whether you check completed maintenance carefully and respect the limits of your signing authority.
Build your answer around the work instructions, the finished repair, required tests, and maintenance records. Explain how you handle a finding that remains unresolved. Separate the checks you can perform from any inspection or return-to-service approval that requires someone else.
For example: "After a hydraulic component replacement, I would compare the completed job with the applicable maintenance instructions. I would check the installation and required test results, then review the maintenance entry for an accurate description of the work. If a check failed or a required inspection was missing, I would keep the job open and bring it to the person responsible for the sign-off. I would sign only work I was authorized to approve."
Avoid treating a passed test as the only check, assuming every mechanic has the same authority, or suggesting that schedule pressure excuses an unresolved defect.
Interviewer tipExpect checks against maintenance instructions, required tests, and complete records. Signing off work without the required authority or leaving an unresolved defect is a red flag.
Candidate tipWalk through checking the repair, test results, and maintenance entry. Make clear which checks you perform and which sign-offs require someone with the proper authority.
Question 2: Walk me through how you use aircraft maintenance manuals and service bulletins to choose a repair method.
Example answerThe interviewer wants to learn how you turn technical instructions into a repair choice that fits the aircraft and its condition.
Start with identifying the aircraft and component. Explain how you check document revisions and applicability, find the defect limits, and determine whether the instructions allow repair or require replacement. Say how you seek clarification when the available instructions do not cover the damage.
For example: "If I found damage on a component, I would first confirm its identification and the aircraft configuration. I would use the current applicable maintenance instructions to compare the damage with the stated limits. I would also check whether an applicable service bulletin affected the repair choice. If the damage fell outside the available repair instructions, I would refer it for an authorized decision rather than improvise a repair."
Avoid choosing instructions for a similar component without checking applicability, assuming every bulletin has the same status, or relying only on memory.
Interviewer tipListen for checking document revisions and applicability to the aircraft and component. Choosing a repair from memory without checking the current instructions is a red flag.
Candidate tipStart with identifying the aircraft, component, and defect. Describe how you find the applicable instructions and check that the proposed repair is within their limits.
Question 3: How do you inspect aircraft landing gear or hydraulic components for cracks, leaks, and other defects?
Example answerThe interviewer wants to know whether your inspection can find defects beyond the most obvious signs of damage.
Choose landing gear or a hydraulic component and describe a clear inspection sequence. Cover the applicable instructions, safe access, visibility, and the areas you examine. Explain how you compare a finding with the specified limits instead of deciding by appearance alone.
For example: "For a landing gear inspection, I would start with the current instructions for that aircraft and make sure I had safe access. I would inspect the specified areas for cracks, damage, and signs of leakage, using a light and mirror to see the specified surfaces and connections. I would look for crack indications, fresh fluid and damaged seals. If the instructions required dye penetrant or eddy current testing, I would arrange that work with qualified personnel. If I found a suspicious area, I would compare it with the inspection criteria and arrange any additional check required before calling the inspection complete."
Avoid describing only a quick walkaround, claiming that every fluid trace means the same defect, or clearing a finding without checking the inspection criteria.
Interviewer tipA sound answer follows the component's inspection instructions and checks hard-to-see areas. Treating a quick glance as a complete inspection is a red flag.
Candidate tipChoose landing gear or a hydraulic component. Explain the inspection sequence, the access and lighting you need, and how you judge a finding against the maintenance instructions.
Question 4: Walk me through how you carry out an aircraft inspection that includes both routine items and a required special check.
Interviewer tipListen for how they confirm the special check applies, track completed items, and record defects. Skipping the special check because the routine checklist is complete is a red flag.
Candidate tipSay where you confirm the special check applies to that aircraft. Then explain how you track completed items and record any defects you find.
Question 5: How do you keep an aircraft's maintenance log up to date with both scheduled work and repairs?
Interviewer tipLook for a clear record of the work, completion date, aircraft or part and who did the work. Leaving out the signature, certificate number or certificate type of the person approving the work for service leaves the signoff incomplete.
Candidate tipFor scheduled work and repairs, explain how you log the work, date it was finished, aircraft or part and who did it. If the work is approved for return to service, include the approver's signature, certificate number and type.
Question 6: How do you set up a test of an aircraft engine or system using the test equipment specified in the maintenance instructions?
Example answerThe interviewer wants to learn whether you can obtain useful test readings without creating a hazard or drawing conclusions from the wrong equipment.
Choose one engine or system test you understand. Walk through finding the instructions, selecting the specified equipment, checking its condition and calibration status where required, and setting up the test safely. Explain how you compare the results with the published limits.
For example: "For a cylinder compression check, I would first find the applicable engine procedure. I would confirm that the tester was suitable and serviceable, then follow the procedure for preparing the engine and controlling propeller movement. I would take and record the readings under the specified conditions. I would compare them with the applicable criteria rather than apply a number remembered from a different engine."
Avoid giving detailed steps you do not know, overlooking engine movement hazards, or treating a single reading taken under the wrong conditions as a diagnosis.
Interviewer tipExpect the specified equipment, safe test conditions, and comparison with published limits. Using readings from an unsuitable instrument is a red flag.
Candidate tipChoose an engine or system test you know. Go through equipment selection, setup, and the readings you compare with the maintenance instructions.
Question 7: How do you approach a repair or rebuild of an aircraft hydraulic unit?
Interviewer tipListen for how they use the manual to decide which parts can be reused and to choose the checks after reassembly. Reusing parts that are outside the manual's limits is a red flag.
Candidate tipPick a unit, such as a hydraulic pump. Explain how the maintenance manual guides which parts you can reuse and which tests you run after reassembly.
Question 8: How do you determine when an aircraft needs fuel or oil sampling for contamination checks?
Example answerThe interviewer wants to know whether you base contamination sampling on the aircraft's requirements and its condition.
Explain where you find the applicable sampling instructions and scheduled checks. Distinguish routine sampling from a check prompted by a suspected contamination problem. Keep fuel and oil requirements separate when they differ, and avoid presenting one interval as suitable for every aircraft.
For example: "I would check the aircraft's current maintenance instructions and applicable inspection schedule for the fuel or oil check involved. I would use those requirements to establish when sampling was due. If there were signs of contamination between scheduled checks, I would report the concern and consult the troubleshooting instructions rather than assume it could wait. I would not use a sampling interval from another aircraft without confirming it applied."
Avoid answering with a personal preference, confusing a routine fluid-level check with a contamination sample, or assuming a clean previous sample rules out a new problem.
Interviewer tipA competent answer uses the aircraft's maintenance instructions and applicable inspection schedule, including checks prompted by a suspected problem. Inventing a universal sampling interval is a red flag.
Candidate tipExplain where you find sampling requirements for the aircraft and how a contamination concern may call for an additional check. Avoid giving one interval for every aircraft.
Question 9: How do you plan your work when several aircraft maintenance jobs need attention at once?
Interviewer tipExpect priorities based on safety, maintenance deadlines, and job dependencies. Skipping required checks to clear the workload is a red flag.
Candidate tipExplain how you review aircraft status, required work, and available parts or tools. Show how you sequence the jobs and revise the plan when a new defect appears.
Question 10: Walk me through how you narrowed down an aircraft fault when test results or inspection findings pointed to more than one possible cause.
Interviewer tipA strong example links test or inspection evidence to ruling out causes and choosing a repair. Replacing parts by guesswork while ignoring contrary findings is a red flag.
Candidate tipUse one repair with several possible causes. Explain the findings you compared, how you ruled causes out and checked the repair, then give the outcome and a lesson.
Question 11: Share an example of how you explained an unwelcome aircraft maintenance finding to your supervisor.
Interviewer tipStrong examples make the finding and its effect on the maintenance job clear. Hiding the defect or softening it until the supervisor misses the risk is a red flag.
Candidate tipSet out the finding briefly. Focus on how you explained the evidence and its effect on the aircraft's status, then describe the supervisor's response.
Question 12: Give an example of how you used a new diagnostic tool to improve an aircraft maintenance job.
Interviewer tipListen for what the new diagnostic tool let them do better and how they checked its readings. Treating an unfamiliar tool's output as conclusive without checking its setup is a red flag.
Candidate tipChoose a diagnostic tool that was new to you. Explain how you learned to use it, applied it on an aircraft job and checked its results, then describe the benefit and a lesson.
Question 13: How do you measure aircraft control-cable tension against the limits in the maintenance instructions?
Interviewer tipExpect the correct tension gauge, measurement conditions, and comparison with the aircraft's limits. Accepting a cable because it feels tight is a red flag.
Candidate tipGo through finding the tension limits, selecting and checking the gauge, and taking the reading. Explain how you account for conditions such as temperature when the instructions require it.
Question 14: Expound on how to Inspect airframes for wear or other defects.
Question 15: What is your experience in replacing repairing worn, defective, or damaged components, using hand tools, gauges, and testing equipment?
Question 16: Share with me how to measure parts for wear, using precision instruments.
Question 17: Describe an experience where you checked for corrosion, distortion, and invisible cracks in the fuselage, wings, and tail, using x-ray and magnetic inspection equipment. How did you handle a failed inspection?
Question 18: Tell me about your experience assembling and installing electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand or power tools.
Question 19: Describe some techniques used to remove or install aircraft engines, using hoists or forklift trucks.
Question 20: Share an experience where you reassembled engines following repair or inspection and reinstall engines in aircraft.
Question 21: Walk me through how to service and maintain aircraft and related apparatus by performing activities such as flushing crankcases, cleaning screens, and lubricating moving parts.
Question 22: Share an experience where you had difficulties reading and interpret pilots' descriptions of problems to diagnose causes. How did you resolve the issue?
Question 23: Tell me about listening to operating engines to detect and diagnose malfunctions such as sticking or burned valves.
Question 24: Describe how you would remove or cut out defective parts or drill holes to gain access to internal defects or damage, using drills and punches.
Question 25: How well do you cooperate and communicate with other workers to coordinate fitting and alignment of heavy parts, or to facilitate processing of repair parts?
Question 26: Share your experience when doing Inventory and requisition or ordering supplies, parts, materials, and equipment.
Question 27: How well do you clean, refuel, and change oil in line service aircraft?
Question 28: What are your skills when it comes to modifying aircraft structures, space vehicles, systems, or components, following drawings, schematics, charts, engineering orders, and technical publications?
Question 29: Tell me how you would clean engines, sediment bulk and screens, and carburetors, adjusting carburetor float levels.
Question 30: Expound on how to Install and align repaired or replacement parts for subsequent riveting or welding, using clamps and wrenches.
New to interviews? Start with the common questions every interview asks →