Pricing Analyst Interview Questions
30 questions
Question 1: Walk me through a time you resolved a large difference between two reserve estimates for the same block of policies.
What interviewers listen forA strong example shows how they traced the reserve difference to data, assumptions or methods and justified the final estimate. Choosing the lower reserve just because it looks better is a red flag.
Candidate tipUse one real case involving two reserve estimates. Explain your checks, what caused the gap, and how your work supported the final estimate. Close with a check you would repeat next time.
Question 2: Walk me through how you analyze experience data to set premium rates and the reserves needed to pay future benefits.
Suggested answerThe interviewer wants to see that you understand the full path from raw data to a rate or reserve you can defend. Walk through it in order: the data and how you checked it, the assumptions you set, the method you used, and how you tested the result. Use one product you know well so the answer stays concrete.
Sample answer: "On a block of term life policies, I started by tying the policy and claims data to the financial records and removing duplicates. I compared actual deaths and lapses with expected and blended our experience with an industry table where our own data was thin. I projected cash flows to get the premium and the reserve, then ran sensitivity tests on mortality and interest. A senior actuary reviewed the assumptions before we finalized them."
Avoid three things: listing formulas without saying why each step matters, skipping how you checked the data and assumptions, and claiming exams or credentials you have not earned.
What interviewers listen forListen for a clear path from data checks to assumptions to testing results against experience. Skipping any review of assumptions is a red flag.
Candidate tipPick one product you have priced or reserved. Explain the data you used, the key assumptions such as mortality or lapse, and how you checked the result before it went out.
Question 3: Share an effective method you have used to analyze statistical information and estimate mortality, accident, sickness, disability, or retirement rates.
Question 4: Describe an accurate probability table which you constructed. What factors did you consider and what data did you use which was helpful?
Question 5: Describe an insurance, annuity, or pension plan which you designed. How did you determine the financial soundness of your plan?
Question 6: Share an experience in which your attention to detail and thoroughness had an impact on your last company.
Suggested answerThe interviewer wants proof that you catch errors others miss and that this protects the organization.
Use Situation, Task, Action, Result. Describe what you were checking, what you noticed, and how you found it, such as comparing against a source or double-checking totals. Then explain what would have happened if the error had gone through, and what you did to prevent it next time.
Sample answer: "While preparing an order for a large customer, I compared the quantities against the signed quote, as I always do, and saw that one item had been entered as 1,000 units instead of 100. I flagged it to my supervisor, we corrected it before it shipped, and we avoided a costly return. Afterward I suggested adding a quote-check step to the order form, and the team adopted it."
Pitfalls: Don't just say you're detail-oriented without an example. Avoid exaggerating the dollar impact. Don't describe perfectionism that caused missed deadlines.
Question 7: How do you make sure your pricing or reserve work meets the actuarial standards and regulations that apply to it?
Suggested answerThe interviewer wants to see that you treat standards as part of the work, not a box to tick at the end. Explain your routine: knowing which standards and rules apply, documenting your work, and getting it reviewed. Rules differ by state and by line of business, so speak to the ones you have worked under and say how you check the rest.
Sample answer: "At the start of a project I confirm which actuarial standards of practice and regulations apply, and I ask a senior actuary when I'm unsure. I document data sources, assumptions and methods as I go, not at the end, so the work can be checked. Every reserve calculation I produce goes through peer review before it is final. I also read the updates our compliance team sends and talk through any that change our methods."
Pitfalls to avoid: claiming to know every rule by heart, treating one state's rules as universal, and leaving out peer review.
What interviewers listen forStrong answers mention following actuarial standards of practice, documenting assumptions and getting peer review. Treating compliance as someone else's job is a red flag.
Candidate tipDescribe how you document assumptions and methods, get work peer reviewed, and keep up with rule changes. Note that rules vary by state and by line of business.
Question 8: Share an experience in which your collaboration with programmers, underwriters, accounts, claims experts, or senior management helped your company to develop a plan for improving business. How did your participation benefit your company?
Question 9: Provide an experience in which you explained a complex technical matter to a client.
Question 10: Provide a time when you successfully advised a client on an important decision.
Question 11: Provide an experience in which you successfully helped a financial institution manage a risk or maximize a return.
Question 12: What would you do if a reinsurer offered a lower price but excluded a risk your company wanted to transfer?
What interviewers listen forThe answer should compare the saving with the risk retained and address negotiating the exclusion or other terms. Accepting the offer on price alone leaves the company's transfer goal unmet.
Candidate tipStart with the risk the company wants to transfer. Explain how you would assess the exclusion's cost and negotiate terms that address that risk before recommending a reinsurance agreement.
Question 13: Describe an effective policy contract provision for a type of insurance which you determined.
Question 14: Share an effective method you have used to determine equitable basis for distributing surplus earnings under participating insurance an annuity contracts in mutual companies.
Question 15: Tell me about a time you had to tell leadership that reserves needed to increase or that a product was underpriced.
Suggested answerThe interviewer wants to know you will deliver unwelcome numbers clearly and promptly. Use Situation, Task, Action, Result: what you found, why it mattered, how you prepared and delivered the message, and what leadership decided.
Sample answer: "During a quarterly review, I saw that claims on a disability product had run above our assumptions for several quarters in a row. My task was to confirm it and brief the finance leadership team. I rechecked the data, ruled out a one-time spike, and estimated how much the reserve would need to rise under a few scenarios. I went over it with my manager first, then presented a short summary with the evidence and the options, including a rate review for new business. Leadership approved the reserve increase that quarter and asked us to track the product monthly."
Avoid softening the numbers to make the meeting easier, blaming the people who priced the product, and telling a story where nothing was decided.
What interviewers listen forListen for how they prepared the message, backed it with clear evidence and offered options. Softening the numbers to avoid an awkward meeting is a red flag.
Candidate tipSay what you found, who needed to hear it, and how you explained it in plain terms. Include the options you offered and how leadership responded.
Question 16: Tell me about a time your analysis led management to change a pricing, reserving or product decision.
Suggested answerThe interviewer wants to see that your work changes decisions, not just fills reports, and that you can explain it to people outside the actuarial team. Use Situation, Task, Action, Result, and make your own part clear.
Sample answer: "Our team was asked whether to expand a policy rider that sales wanted to push harder. I analyzed several years of claims and lapse data and found the rider was losing money at older issue ages. I built a simple chart comparing expected and actual results by age band and walked the product managers through it without jargon. I suggested limiting the issue ages instead of dropping the rider. Management adopted the change for new sales, and we reviewed the results again the following year."
Pitfalls to avoid: so much technical detail that the decision gets lost, claiming a team result as yours alone, and leaving out what happened after the decision.
What interviewers listen forLook for a clear link between the analysis and the decision, and how they made the case to non-actuaries. Taking credit for a team decision without saying their own part is a red flag.
Candidate tipDescribe the question management faced, what your numbers showed, and how you presented them. End with the decision that was made and what happened after.
Question 17: Provide an example when your ethics were tested.
Suggested answerThe interviewer wants to know whether you do the right thing when it is inconvenient, and how you handle pressure to cut corners.
Use Situation, Task, Action, Result. Describe the pressure or temptation without naming people, explain the choice you made and why, and how you handled the conversation. Keep the focus on your actions, not on judging others.
Sample answer: "Near the end of a quarter, a coworker asked me to record a sale as complete even though the customer hadn't signed yet, so our numbers would look better. I told them I wasn't comfortable doing that and suggested we tell our manager the deal would close the following week. My manager agreed it should wait. The customer signed early in the new quarter, and our records stayed accurate."
Pitfalls: Don't say your ethics have never been tested. Avoid stories that make you sound self-righteous or that share confidential details. Don't pick an example where you went along with the wrong choice and stop there.
Question 18: Share an example that shows your ability to analyze actuarial data and draw a useful conclusion for pricing or reserving.
Suggested answerThe interviewer wants evidence that you can interpret actuarial information and draw a conclusion the data supports.
Choose a pricing or reserving analysis you performed. Briefly explain the decision involved, then describe the data, your reasoning, and the checks you made before reaching a conclusion. Finish with how the conclusion was used. Data checks support the story, but should not replace the analysis.
Sample answer: "I was reviewing claims experience for a pricing analysis. The overall average had risen, but I checked whether that reflected higher costs within groups or a change in the mix of business. I reconciled the claims and exposure totals, compared results within similar groups, and reviewed unusual large claims. The shift in business mix explained part of the increase, so I presented that separately from changes within groups. The pricing team used the breakdown to review its assumptions instead of applying the overall increase to every group."
Avoid treating correlation as proof of cause, hiding data limitations, or describing calculations without explaining the conclusion.
What interviewers listen forListen for their own reasoning from actuarial data to a supported pricing or reserving conclusion. Reporting a pattern as proof of its cause without checking other explanations is a red flag.
Candidate tipChoose one analysis you performed. Name the data, the pattern you found, how you checked your interpretation, and the conclusion it supported. Finish with how the analysis was used.
Question 19: Tell me about a time you brought a new tool or method into your actuarial work, such as moving a spreadsheet model to a scripted one.
Suggested answerThe interviewer wants to know that you look for better ways to work and that you change tools carefully. Use Situation, Task, Action, Result, and make the testing step clear.
Sample answer: "Our lapse study ran in a large spreadsheet that took days to update and broke whenever someone sorted the wrong column. I proposed rewriting it as a script, and my manager agreed to a trial. I rebuilt it in stages and ran the old and new versions side by side for two quarters until the results matched. I wrote short notes so others on the team could run it, and I walked them through the first update. The study now updates much faster, and changes are easier to track and review."
Pitfalls to avoid: picking a tool because it is popular rather than because it solves a problem, skipping the side-by-side testing, and leaving out how the rest of the team learned the new tool.
What interviewers listen forA strong answer covers why the change was needed, how they tested the new version against the old, and how others adopted it. Switching tools without checking results is a red flag.
Candidate tipExplain what was slow or risky about the old way, what you changed, and how you confirmed the new results matched. Say what it saved or improved for the team.
Question 20: How do you plan and prioritize your work when quarter-end valuation deadlines overlap with project requests?
Suggested answerThe interviewer wants to see a practical system that protects accuracy when time is tight. Describe your method, then give a short example.
Sample answer: "I keep a calendar that works back from each reporting date, with time set aside for data checks and peer review, since that is where errors get caught. A few weeks before quarter-end, I look at my project list and tell project owners which tasks will pause. If a request is urgent, I ask my manager which item should move rather than quietly squeezing review time. Last quarter, a pricing request came in during valuation week. I agreed to a rough first pass right away and a full analysis the week after, and both the valuation and the pricing work went out on time."
Pitfalls to avoid: saying you simply work longer hours, cutting review time to hit dates, and describing a system without an example of it working.
What interviewers listen forLook for a concrete system, such as working back from reporting dates and flagging conflicts early. No plan for review time is a red flag, since rushed valuation work invites errors.
Candidate tipDescribe how you map deadlines, leave time for checks and review, and talk to your manager when two priorities clash. A real quarter-end example makes it believable.
Question 21: Tell me about a time you listened closely to an underwriter, claims expert or client and it changed an assumption in your analysis.
What interviewers listen forA strong answer shows they asked follow-up questions and tested what they heard against the data. Treating others' input as noise because the model already ran is a red flag.
Candidate tipName who you listened to and what they told you that the data did not show. Say how you checked it and what changed in your assumption or result.
Question 22: Describe how you handled a product manager, underwriter or client who pushed back hard on your actuarial numbers.
Suggested answerThe interviewer wants to learn how you handle strong pushback on actuarial numbers while keeping the discussion respectful and grounded in evidence.
Use Situation, Task, Action, Result to organize one real disagreement. Briefly explain the estimate and your responsibility, then focus on your own actions: listening to the objection, explaining assumptions and weighing any new facts. Close with the outcome and what you learned about handling pushback.
For example: "An underwriter thought my loss estimate was too high for a renewal. I asked which part seemed out of line and learned they were comparing it with last year's estimate. I walked through the claims data and trend assumptions, then checked a recent claims update they pointed out. The update supported a small revision, which I explained separately from the assumptions that still held. We finished with a shared understanding of the estimate. I learned to ask about the comparison behind an objection before defending my work."
Avoid blaming the other person, changing an estimate simply to end an argument, or describing only the calculations without showing how you handled the conversation.
What interviewers listen forListen for how they addressed the objection to their actuarial assumptions, the outcome and what they learned. Changing numbers just to end the argument is a red flag.
Candidate tipChoose one real disagreement over your actuarial numbers. Focus on how you handled the person's pushback, the outcome and what you learned about discussing your assumptions.
Question 23: Tell me about an experience in which you analyzed information and evaluated results to choose the best solution to a problem.
Suggested answerThe interviewer wants to see how you make decisions: what information you gather, how you compare options, and how you check that your choice worked.
Use Situation, Task, Action, Result. Describe the problem, the information you looked at, the options you weighed, and why you picked one. Then show how you measured whether it worked.
Sample answer: "Customer complaints about late deliveries had been rising for two months. I pulled the delivery records and saw most delays came from one shipping route. I compared three options: switching carriers on that route, moving pickup earlier, or adding a second pickup. An earlier pickup cost nothing and fixed the timing gap, so I recommended it. We tracked deliveries for the next month, and late arrivals on that route dropped back to normal."
Pitfalls: Don't jump straight to the solution without explaining how you chose it. Avoid quoting precise figures you can't explain. Don't skip how you checked the result.
Question 24: Provide a time when you were able to identify a complex problem, evaluate the options, and implement a solution. How did the solution benefit your employer?
Suggested answerThe interviewer wants to see how you handle problems with many parts: how you break them down, choose a path, and follow through.
Use Situation, Task, Action, Result. Explain why the problem was complex, such as several causes or many people affected. Walk through how you found the root cause, the options you weighed, and how you put the solution in place. End with the benefit to your employer.
Sample answer: "Our monthly billing kept going out late. The cause wasn't one thing: data arrived late from two departments, and the billing software needed manual fixes. I mapped each step, timed them, and found the manual fixes took the most time. I compared hiring temporary help with automating the fixes, and we chose automation with help from our technology team. Billing went out on time for the next three months, and customers paid faster."
Pitfalls: Don't pick a simple problem and call it complex. Avoid skipping the options you considered. Don't take credit for others' work; name who helped.
Question 25: Name a time when you identified strengths and weaknesses of alternative solutions to problems. What was the impact?
Suggested answerThe interviewer wants to see that you weigh options carefully instead of going with the first idea, and that your reasoning leads to better results.
Use Situation, Task, Action, Result. Describe the problem, list two or three options you considered, and give the main strength and weakness of each. Explain which you chose and why, then describe the impact.
Sample answer: "Our team needed a faster way to answer common customer questions. I compared three options: hiring a part-time assistant, writing a help page, or creating email templates. Hiring was quick but costly. A help page would take longer but reduce calls over time. Templates were cheap but only sped up our replies. I recommended the help page, with templates as a short-term fix. Within a few months, repeat questions fell noticeably."
Pitfalls: Don't list options without saying what you compared them on. Avoid choosing an option without explaining the trade-off. Don't leave out the impact.
Question 26: Share an experience in which your ability to consider the costs or benefits of a potential action helped you choose the most appropriate action.
Suggested answerThe interviewer wants to see that you think through the trade-offs of a decision before acting.
Use Situation, Task, Action, Result. Describe the decision, the options, and the costs and benefits you weighed, including money, time, risk, and the effect on people. Explain which you chose and how it turned out.
Sample answer: "Our team's printer broke for the third time in a year. One option was another repair, which was cheap. Another was a new printer, which cost more up front. I looked at the past year's repair bills and the downtime each breakdown caused. The repairs plus lost time were likely to cost more than a new machine over two years. I shared that with my manager, we bought a new printer, and we haven't had a breakdown since."
Pitfalls: Don't focus only on money; include time and people. Avoid a decision you made without checking the facts. Don't skip how it turned out.
Question 27: Share an example of a time you had to gather information from multiple sources. How did you determine which information was relevant?
Suggested answerThe interviewer wants to know how you collect information and how you decide what to trust and use.
Use Situation, Task, Action, Result, and spend most of your answer on the second part of the question. Explain what sources you used, how you checked them against each other, and what rule you used to decide what mattered, such as how current it was or how closely it fit the question.
Sample answer: "My manager asked me to recommend a new supplier for office equipment. I collected price lists from four suppliers, read online reviews, and asked two other departments about their experience. Some reviews were several years old, so I gave more weight to recent ones and to my colleagues' first-hand accounts. I summarized the top two options in a one-page comparison, and we chose the supplier that scored best on reliability and price."
Pitfalls: Don't list sources without explaining how you filtered them. Avoid saying you used everything you found. Don't forget to say what decision the information supported.
Question 28: Tell me about the last time you monitored or reviewed information and detected a problem. How did you respond?
Suggested answerThe interviewer wants to see that you keep an eye on your work area or data, notice problems early, and act on them.
Use Situation, Task, Action, Result. Describe what you were checking and how often, what signaled the problem, and the steps you took right away. Include who you told and what you did to stop it happening again.
Sample answer: "I review our inventory report every Monday. One week I saw that one item's stock had dropped far faster than usual. I checked the order records and found a duplicate order that had shipped twice to the same customer. I told my supervisor, contacted the customer to arrange a return, and asked our systems team to block duplicate orders. The return came back the following week, and we haven't seen the problem since."
Pitfalls: Don't pick a problem someone else found and you only fixed. Avoid stopping at the fix without saying how you prevented a repeat. Don't stay vague; name what you were monitoring.
Question 29: What have you found to be the best way to monitor the performance of your work and/or the work of others? Share a time when you had to take corrective action.
Suggested answerThe interviewer wants to know how you track whether work is on target and what you do when it isn't.
Answer both parts. First, describe your method for checking work: what you measure, how often, and how you get feedback. Then give one example of a time you found a problem and corrected it, using Situation, Task, Action, Result.
Sample answer: "I set a few clear checkpoints for any task, such as a draft date and a final review, and compare progress against them each week. On one project, a teammate's section was behind at the draft checkpoint. I asked what was getting in the way and learned they were waiting on data from another team. I followed up with that team, got the data the next day, and we moved the review back two days. The project still finished on time."
Pitfalls: Don't describe constant checking that sounds like micromanagement. Avoid blaming the person who fell behind. Don't skip the corrective action.
Question 30: Provide an example of a project you worked on that demonstrates your programming abilities. What was your role in the project?
Suggested answerThe interviewer wants evidence of real programming skill and a clear picture of what you personally did.
Use Situation, Task, Action, Result. Describe the problem the project solved, the languages or tools you used, your exact role, one technical challenge you handled, and the result. Keep it plain enough for someone who doesn't code to follow.
Sample answer: "Our team spent hours each week copying data from spreadsheets into a reporting tool. I wrote a script that read the spreadsheets, checked for missing or badly formatted values, and loaded the data automatically. I was the only developer, so I also wrote the tests and a short guide for the team. The hardest part was handling files that didn't follow the template, so I added clear error messages instead of letting the script fail silently. The weekly task went from hours to a few minutes."
Pitfalls: Don't overstate your role in a team project. Avoid a list of languages with no story. Don't skip how you tested your work.